영어가 서툴러 국제승인 인기 IT인증자격증 필수시험 과목인EMC인증 E20-822시험에 도전할 엄두도 낼수 없다구요? 이런 생각은 이글을 보는 순간 버리세요. EMC인증 E20-822시험을 패스하려면ITExamDump가 고객님의 곁을 지켜드립니다. ITExamDump의EMC인증 E20-822덤프는 EMC인증 E20-822시험패스 특효약입니다. 영어가 서툴러고 덤프범위안의 문제만 기억하면 되기에 영어로 인한 문제는 걱정하지 않으셔도 됩니다.
EMC인증E20-822시험은 IT인증시험과목중 가장 인기있는 시험입니다. ITExamDump에서는EMC인증E20-822시험에 대비한 공부가이드를 발췌하여 IT인사들의 시험공부 고민을 덜어드립니다. ITExamDump에서 발췌한 EMC인증E20-822덤프는 실제시험의 모든 범위를 커버하고 있고 모든 시험유형이 포함되어 있어 시험준비 공부의 완벽한 선택입니다.
우리의 덤프는 기존의 시험문제와 답과 시험문제분석 등입니다. ITExamDump에서 제공하는EMC E20-822시험자료의 문제와 답은 실제시험의 문제와 답과 아주 비슷합니다. ITExamDump는 여러분이 한번에EMC E20-822인증시험을 패스함을 보장 드립니다.
많은 시간과 돈이 필요 없습니다. 30분이란 특별학습가이드로 여러분은EMC E20-822인증시험을 한번에 통과할 수 있습니다, ITExamDump에서EMC E20-822시험자료의 문제와 답이 실제시험의 문제와 답과 아주 비슷한 덤프만 제공합니다.
제일 빠른 시일내에 제일 간단한 방법으로EMC인증 E20-822시험을 패스하는 방법이 없냐구요? ITExamDump의EMC인증 E20-822덤프를 공부하시면 가능합니다. ITExamDump의EMC인증 E20-822덤프는 많은 분들이 검증한 가장 유력한EMC인증 E20-822시험공부자료입니다. 덤프의 문제만 기억하시면 패스는 문제없기에 제일 빠른 시일내에 시험을 패스하여 자격증 취득이 가능합니다.
ITExamDump의 EMC인증 E20-822덤프는 최근 유행인 PDF버전과 소프트웨어버전 두가지 버전으로 제공됩니다.PDF버전을 먼저 공부하고 소프트웨어번으로 PDF버전의 내용을 얼마나 기억하였는지 테스트할수 있습니다. 두 버전을 모두 구입하시면 시험에서 고득점으로 패스가능합니다.
EMC E20-822인증시험이 이토록 인기가 많으니 우리ITExamDump에서는 모든 힘을 다하여 여러분이 응시에 도움을 드리겠으며 또 일년무료 업뎃서비스를 제공하며, ITExamDump 선택으로 여러분은 자신의 꿈과 더 가까워질 수 있습니다. 희망찬 내일을 위하여 ITExamDump선택은 정답입니다. ITExamDump선택함으로 당신이 바로 진정한IT인사입니다.
시험 번호/코드: E20-822
시험 이름: EMC (CLARiiON Solutions Expert Exam for Storage Administrators)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 120 문항
업데이트: 2013-11-26
E20-822 덤프무료샘플다운로드하기: http://www.itexamdump.com/E20-822.html
NO.1 A customer is implementing the Replication Manager/SAN Copy/RepliStor solution for DR of their
Exchange environment. In the process of configuring this solution they need to configure the RM DR
utility to run after the completion of the SAN Copy job.
Which level of IR callout should they use in order for the script to invoke at the proper time?
A.100
B.300
C.400
D.600
Answer: D
EMC dump E20-822덤프 E20-822자료 E20-822
NO.2 A customer has recently upgraded their CLARiiON to FLARE R26. What software and configuration
changes must the storage administrator ensure are in place to take advantage of the Asymmetric
Active/Active features of the software?
A.PowerPath 5.0; and change all initiators to use Failover mode 2
B.PowerPath 5.0; disable ArrayCommPath, and change all initiators to use Failover mode 4
C.PowerPath 5.1; and change all initiators to use Failover mode 4
D.PowerPath 5.1; disable Array CommPath, and change all host initiators to use Failover mode 3
Answer: C
EMC자격증 E20-822 dump E20-822
NO.3 A new CLARiiON arrives at a customer's site and an EMC Customer Engineer performs the physical
installation. The storage administrator is under a lot of pressure to have the array online and in production
by the end of the week. The storage administrator selects several Windows and Solaris servers for the
initial production rollout. The storage requirements have been agreed upon and the storage administrator
creates 30 LUNs of various sizes based upon EMC best practices.
The administrator works with the server team to install HBAs, update settings, install EMC software, and
then perform the necessary cabling and zoning requirements. After the hosts successfully register with
the CLARiiON array, the Windows and Solaris administrators state each server has 30 LUNs allocated.
What does the storage administrator need to accomplish to ensure each server has access to the
appropriate LUNs?
A.Create the appropriate storage groups
B.Disable Access Logix
C.Enable Access Logix
D.Fix the incorrect zones
Answer: C
EMC dumps E20-822기출문제 E20-822자료 E20-822시험문제 E20-822덤프
NO.4 Click the Exhibit button.
You are the SAN Administrator at a company. The company is running multiple Exchange Server 2007
storage groups on a CLARiiON array that exclusively uses 15k rpm 146 GB drives. You have been tasked
with adding a third Exchange storage group with one mailbox store to the existing server.
The storage for this new Exchange storage group must be allocated from the same CLARiiON currently
running the other two Exchange storage groups. All Exchange storage groups are presently exhibiting a
1:1 read/write ratio. The new storage group will require capacity identical to the existing Exchange
storage groups.
The table below, as well as the exhibit, indicates the current utilization of the array.w`V6a2tYJ%&,*In
order to satisfy the capacity requirements (GB and IOPS), in which RAID group must you create a
database LUN for the new Exchange storage group?
A.0
B.10
C.20
D.30b
Answer: C
EMC E20-822 E20-822덤프 E20-822최신덤프
NO.5 A customer created two RAID groups, 0 and 2, with the default settings on their CX3-80 and bound
four LUNs in each group. After starting the application the customer notices all I/O is going through SP B.
What caused the LUN imbalance?
A.CX3-80 has a single SP
B.Default setting bound all LUNs on the same SP
C.Host does not have failover software installed
D.Host is not ALUA-aware
Answer: B
EMC E20-822인증 E20-822 E20-822 E20-822
NO.6 A customer uses Incremental SAN Copy (ISC) as part of a DR solution. They have configured the
Reserved LUN Pool (RLP). They are adapting their environment to support different failure scenarios.
Which combination of failures is most serious?
A.A failure of the ISC update followed by a failure of the production LUN
B.A failure of the ISC update followed by a failure of the remote LUN
C.A failure of the link followed by a failure of the remote RLP
D.A failure of the RLP on the remote CLARiiON followed by a failure of the remote LUN
Answer: A
EMC E20-822최신덤프 E20-822 E20-822 E20-822 pdf
NO.7 A customer was running a snapshot session when they noticed a SP failure. The Source LUN was
owned by the failed SP. What will happen to the session and the Reserved LUN Pool (RLP) LUN?
A.Session continues and the RLP LUNs trespass. After repairing the failed SP, the RLP LUN must be
manually trespassed to the original owning SP.
B.Session continues and the RLP LUNs trespass. After repairing the failed SP, the RLP LUN trespasses
back to the original owning SP.
C.Session gets deactivated and the SP frees the allocated LUN. After fixing the failed SP, the session will
activate and the original RLP LUN will be allocated.
D.Session stops and a new RLP LUN will be allocated on the surviving SP upon fixing the failed SP. The
RLP LUN will trespass back to the original SP and the user must manually restart the session.
Answer: B
EMC시험문제 E20-822자료 E20-822인증 E20-822자격증
NO.8 A large financial customer has a time-critical OLTP application running on a dedicated CX3-80. One of
their internal administrators believes they modified something that could have affected the production
LUN. Since then the response time has increased significantly.
What action is the likely cause of the problem?
A.Decreased the high watermark to 75%
B.Enabled auto-assignment
C.Increased queue depth to 128
D.Increased the cache write aside value to 3076
Answer: C
EMC dump E20-822자격증 E20-822시험문제 E20-822 E20-822
NO.9 A customer has a single RAID group with a RAID 1/0 6+6 LUN on a dedicated DAE2. This LUN is
active on SP A. They need to expand with the maximum possible increase in IOPS. The LUN may not go
offline. The customer has a new DAE2 with the same disks.
How should they proceed?
A.Add 12 disks to the current RAID group. Create a new LUN. Create a striped metaLUN.
B.Back up the current LUN. Create a new RAID group and a new LUN on SP B. Present it to the host and
create a LVM plaid. Restore the data.
C.Create a new RAID group and create a new LUN on SP A. Create a concatenated metaLUN.
D.Create a new RAID group and create a new LUN on SP A. Create a striped metaLUN.
Answer: D
EMC E20-822 pdf E20-822시험문제 E20-822 E20-822
NO.10 Click the Exhibit button.
A storage administrator is automating a solution using the Navisphere Secure CLI. In the event of
production data corruption, the script needs to recover from the target LUNs.
Which steps should the script perform?
P = Primary
S = Secondary
Snap = Snapshot
A.Unmount P, fracture, roll back Snap, synchronize, promote P, and mount P
B.Unmount P, promote S, fracture, roll back Snap, synchronize, promote P, and mount P
C.Unmount P, roll back Snap, promote S, fracture, synchronize, promote P, and mount P
D.Unmount P, roll back Snap, restore S, and mount P
Answer: B
EMC E20-822 E20-822자료 E20-822자료
NO.11 Click the Exhibit button.
While performing a routine check of a CX3-40 with FLARE R26 the storage administrator receives an
error while trying to clear the logs. What is the cause of the error?
A.Host agent is not running
B.The Privileged User List is empty
C.The user is logged in as a security administrator role
D.The user is logged in with a manager role
Answer: D
EMC E20-822최신덤프 E20-822기출문제 E20-822 E20-822시험문제
NO.12 Click the Exhibit button.
What is true of LUN 3?
A.Disk crossings are excessively high
B.Disk utilization is above the best practices threshold
C.The host data is misaligned
D.The number of stripe crossings indicates a large I/O size
Answer: C
EMC덤프 E20-822 E20-822최신덤프 E20-822 E20-822
NO.13 You are using Replication Manager to make clones of two production Exchange mailbox database
LUNs. After reviewing the event log for the week, you notice there have been numerous failures but no
alerts have been sent out. Replication Manager was configured to send email alerts in case of an
Exchange job failure.
What is preventing the email alerts from being sent out?
A.MAPI32.DLL is missing on the Replication Manager server
B.Outlook was not installed on the Replication Manager server
C.The Replication Manager console was not configured to relay alerts
D.The SMTP service in IIS was not configured on the Replication Manager server
Answer: D
EMC E20-822 E20-822 dumps E20-822 E20-822
NO.14 A company has implemented Replication Manager to back up their SQL Server. In addition to clone
copies every 6 hours, they have also implemented SQL Server log backups for a more granular RPO.
Last night, a junior DBA corrupted the production database. After using Replication Manager to restore
the database with no recovery, the senior DBA attempts to replay the transaction log backups but the
database returns an error indicating that no database is in a state to replay logs.
What is the cause of this restore failure?
A.Replication Manager only supports transaction log replay on databases restored with full recovery
B.rmsqlrestore.exe was not used to replay the VDI metadata
C.The restored database's SCN is out of sync with the SQL system databases
D.The transaction log backups have a gap in the sequence of transactions
Answer: B
EMC최신덤프 E20-822자료 E20-822 E20-822 E20-822인증
NO.15 A new CLARiiON arrives at a customer's site and an EMC Customer Engineer performs the physical
installation. The storage administrator is under a lot of pressure to have the array online and in production
by the end of the week. The storage administrator selects several Windows and Solaris servers for the
initial production rollout. The storage requirements have been agreed upon and the storage administrator
creates 30 LUNs of various sizes based upon EMC best practices.
The administrator works with the server team to install HBAs, update settings, install EMC software, and
then perform the necessary cabling and zoning requirements. After the hosts successfully register with
the CLARiiON array, the Windows and Solaris administrators state each server has 30 LUNs allocated.
What does the storage administrator need to accomplish to ensure each server has access to the
appropriate LUNs?
A.Create the appropriate storage groups
B.Disable Access Logix
C.Enable Access Logix
D.Fix the incorrect zones
Answer: C
EMC최신덤프 E20-822 dump E20-822 E20-822
NO.16 A customer has been tasked with copying 50 LUNs between two CLARiiONs using SAN Copy. The
customer starts the sessions selecting all defaults. The resulting copies appear to be taking an
unexpectedly long time.
Which settings should be increased to improve performance?
A.Reserved LUN Pool Size, Concurrent sessions
B.Throttle Value, Concurrent sessions
C.Throttle Value, Reserved LUN Pool Size
D.Write cache, Reserved LUN Pool
Answer: B
EMC기출문제 E20-822인증 E20-822 E20-822 dumps E20-822시험문제
NO.17 A customer created two RAID groups, 0 and 2, with the default settings on their CX3-80 and bound
four LUNs in each group. After starting the application the customer notices all I/O is going through SP B.
What caused the LUN imbalance?
A.CX3-80 has a single SP
B.Default setting bound all LUNs on the same SP
C.Host does not have failover software installed
D.Host is not ALUA-aware
Answer: B
EMC dump E20-822 E20-822 E20-822
NO.18 Click the Exhibit button.
A customer uses multiple server preparation scripts; one for new Exchange servers and one for recovery.
These scripts are used to configure the CLARiiON storage using the Navisphere Secure CLI. The
customer calls and reports that they accidentally ran the new server preparation script instead of the
recovery script they intended to run.
The customer asks for a check to see if their data is still available from CLARiiON storage as they cannot
find their LUNs. The CLARiiON SP event logs show the data in the exhibit. Which method can the
customer use to correct the problem?
A.Rebind base and component LUNs, reform the metaLUN, place the metaLUN in SG for the host, and
recover the data from the backup.
B.Reform the metaLUN from the original base and component LUNs, place the metaLUN in SG for the
host, and recover the data from the backup.
C.Use CLARiiON recovery tools to recover the metaLUN, place the metaLUN in SG for the host, and
recover the data from the backup.
D.Use Navisphere Secure CLI tools to recover base and component LUNs, reform the metaLUN, and
place the metaLUN in SG for the host.
Answer: A
EMC E20-822 E20-822시험문제
NO.19 A customer is currently using Replication Manager to create clone copies of their SQL Server instance
which are then mounted to a backup server and streamed to tape. The customer has decided to purchase
a second CLARiiON and implement a DR scenario. The DR site is located 30 km away. A dedicated T1
(1.5 Mb) line is leased specifically for DR purposes with measured latencies that average 5-10 ms.
The application is considered mission-critical and as such very little data loss is acceptable. Any solution
implemented must have very little impact on performance. Time will be allowed for the application to be
recovered in the case of a disaster. The implemented solution must also allow for transaction logs to be
replayed in the case of data corruption.
Which DR solution would best fit this scenario?
A.MirrorView/A
B.RepliStor SQL Server Module
C.SQL Log Shipping/Full SAN Copy from the production LUN
D.SQL Log Shipping/Incremental SAN Copy from the production LUN
Answer: C
EMC E20-822 pdf E20-822 pdf E20-822
NO.20 Click the Exhibit button.
While performing a routine check of a CX3-40 with FLARE R26 the storage administrator receives an
error while trying to clear the logs. What is the cause of the error?
A.Host agent is not running
B.The Privileged User List is empty
C.The user is logged in as a security administrator role
D.The user is logged in with a manager role
Answer: D
EMC dump E20-822최신덤프 E20-822 E20-822시험문제
NO.21 A company has requested an independent consultant to develop and implement a security model for
the CLARiiON storage platform. The company has limited access to the administrator role by removing
rights for all accounts. However, they would like to keep the single administrator role account for top level
management.
Management of user security should not be done by the administrator role user. In addition, the storage
object administrators should not be able to change user security when using the Secure CLI. CLARiiON
storage systems are located in a protected data center with limited physical access.
Which method should be employed to manage user security?
A.Create a Security Administrator role user and create a Manager role user account for storage object
managers.
B.Create a Security Administrator role user, enable the CLI filter, and create a Manager role user account
for storage object managers.
C.Implement security using PKI certificates, create a Security Administrator role user, and enable the CLI
filter.
D.Implement security using PKI certificates, enable the CLI filter, and create a Manager role user account
for storage object managers.
Answer: B
EMC E20-822 E20-822 dump E20-822 E20-822자료
NO.22 Click the Exhibit button.
Based on the exhibit, what happened between 05:21 A.M. and 06:56 A.M.?
A.CLARiiON back-end port was disconnected
B.CLARiiON front-end port was disconnected
C.MirrorView connection failed
D.SAN Copy connection failed
Answer: C
EMC E20-822인증 E20-822 E20-822최신덤프 E20-822
NO.23 Click the Exhibit button.
While performing a routine check of a CX3-40 with FLARE R26 the storage administrator receives an
error while trying to clear the logs. What is the cause of the error?
A.Host agent is not running
B.The Privileged User List is empty
C.The user is logged in as a security administrator role
D.The user is logged in with a manager role
Answer: D
EMC덤프 E20-822 dump E20-822 E20-822 dumps E20-822최신덤프
NO.24 Click the Exhibit button.
A failure has occurred in a DR environment. The error message is displayed in the exhibit. What must be
done to correct the failure?
A.Add more LUNs to the remote CLARiiON RLP. Restart the synchronization.
B.Destroy the mirror. Add a secondary of the correct size.
C.Enable write cache on the remote CLARiiON Write Intent Logs. Restart the synchronization.
D.Increase the write cache size on the remote CLARiiON.
Answer: A
EMC덤프 E20-822 E20-822자격증 E20-822 E20-822
NO.25 Click the Exhibit button.
A customer wants to create an additional 250 GB LUN on their existing RAID 6 group. How can this be
accomplished?
A.Create the LUN on another RAID 6 group using concatenation
B.Defragment the RAID group and bind the additional LUN
C.Destroy the RAID group and create the new LUNs
D.Expand the RAID group to increase the available space
Answer: A
EMC최신덤프 E20-822 E20-822 E20-822 E20-822 E20-822시험문제
NO.26 A large warehousing company has two CLARiiONs with two LUNs set up and each is mirrored with
MirrorView/A over DWDM. The two sites are less than 1 km away.
The company is currently running an OLTP database on a 300 GB RAID 1/0 4+4 LUN and its logging on a
150 GB RAID 1/0 4+4 LUN. The I/O read/write ratio is 2:1 with a 2 kB average I/O size.
The customer notices that at peak times the latency becomes an issue as their users start to complain
about poor performance. What is your recommendation?
A.Check the fibre for faults
B.Upgrade the CLARiiON model
C.Use Incremental SAN Copy
D.Use MirrorView/S
Answer: D
EMC E20-822 pdf E20-822 E20-822 dump E20-822 pdf
NO.27 Click the Exhibit button.
A customer wants to create an additional 250 GB LUN on their existing RAID 6 group. How can this be
accomplished?
A.Create the LUN on another RAID 6 group using concatenation
B.Defragment the RAID group and bind the additional LUN
C.Destroy the RAID group and create the new LUNs
D.Expand the RAID group to increase the available space
Answer: A
EMC E20-822 E20-822 E20-822시험문제
NO.28 A customer has configured SnapView for two LUNs on a DR CLARiiON storage system. When the
client attempts to run the Navisphere Secure CLI command to create the snapshot session, it fails.
In the setup process for using SnapView, which step did the customer forget to do?
A.Allocate LUNs to the Reserved LUN Pool
B.Allocate Write Intent Log
C.Enable Incremental Synchronization
D.Test IP link latency
Answer: A
EMC E20-822 E20-822 dump E20-822
NO.29 A customer is reporting a problem with a physical disk. Examining the SP Event Log shows errors for
LUN 16. Data is being gathered from a UNIX host used for storage management. The host does not have
the capability to run the Navisphere Web UI.
To determine the underlying disk structure, which Navisphere Secure CLI subcommand can be used to
determine if LUN 16 is being affected?
A.getdisk
B.getinfo
C.getlun
D.getrg
Answer: C
EMC E20-822 E20-822 pdf
NO.30 Click the Exhibit button.
While performing a routine check of a CX3-40 with FLARE R26 the storage administrator receives an
error while trying to clear the logs. What is the cause of the error?
A.Host agent is not running
B.The Privileged User List is empty
C.The user is logged in as a security administrator role
D.The user is logged in with a manager role
Answer: D
EMC E20-822자격증 E20-822인증 E20-822
ITexamdump의 HP2-Z25덤프의 VCE테스트프로그램과 VCP-510덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 1Z1-061시험에 대비한 고품질 덤프와 1Z1-536시험 최신버전덤프를 제공해드립니다. 최고품질 MB7-700시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
시험자료링크: http://www.itexamdump.com/E20-822.html
