2014년 3월 31일 월요일

HP0-Y35 덤프 HP 인증 시험

HP인증 HP0-Y35시험은 등록하였는데 시험준비는 아직이라구요? HP인증 HP0-Y35시험일이 다가오고 있는데 공부를 하지 않아 두려워 하고 계시는 분들은 이 글을 보는 순간 시험패스에 자신을 가지게 될것입니다. 시험준비 시간이 적다고 하여 패스할수 없는건 아닙니다. ITExamDump의HP인증 HP0-Y35덤프와의 근사한 만남이HP인증 HP0-Y35패스에 화이팅을 불러드립니다. 덤프에 있는 문제만 공부하면 되기에 시험일이 며칠뒤라도 시험패스는 문제없습니다. 더는 공부하지 않은 자신을 원망하지 마시고 결단성있게ITExamDump의HP인증 HP0-Y35덤프로 시험패스에 고고싱하세요.

HP0-Y35는HP의 인증시험입니다.HP0-Y35인증시험을 패스하면HP인증과 한 발작 더 내디딘 것입니다. 때문에HP0-Y35시험의 인기는 날마다 더해갑니다.HP0-Y35시험에 응시하는 분들도 날마다 더 많아지고 있습니다. 하지만HP0-Y35시험의 통과 율은 아주 낮습니다.HP0-Y35인증시험준비중인 여러분은 어떤 자료를 준비하였나요?

ITExamDump의 HP인증 HP0-Y35덤프를 구매하시고 공부하시면 밝은 미래를 예약한것과 같습니다. ITExamDump의 HP인증 HP0-Y35덤프는 고객님이 시험에서 통과하여 중요한 IT인증자격증을 취득하게끔 도와드립니다. IT인증자격증은 국제적으로 인정받기에 취직이나 승진 혹은 이직에 힘을 가해드립니다. 학원공부나 다른 시험자료가 필요없이ITExamDump의 HP인증 HP0-Y35덤프만 공부하시면HP인증 HP0-Y35시험을 패스하여 자격증을 취득할수 있습니다.

ITExamDump의 HP인증 HP0-Y35시험덤프자료는 여러분의 시간,돈 ,정력을 아껴드립니다. 몇개월을 거쳐 시험준비공부를 해야만 패스가능한 시험을ITExamDump의 HP인증 HP0-Y35덤프는 며칠간에도 같은 시험패스 결과를 안겨드릴수 있습니다. HP인증 HP0-Y35시험을 통과하여 자격증을 취득하려면ITExamDump의 HP인증 HP0-Y35덤프로 시험준비공부를 하세요.

시험 번호/코드: HP0-Y35
시험 이름: HP (Wireless Networks - ASE 2011 Delta Exam)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 75 문항
업데이트: 2014-03-30

HP인증HP0-Y35시험준비를 하고 계시다면ITExamDump에서 출시한HP인증HP0-Y35덤프를 제일 먼저 추천해드리고 싶습니다. ITExamDump제품은 여러분들이 제일 간편한 방법으로 시험에서 고득점을 받을수 있도록 도와드리는 시험동반자입니다. HP인증HP0-Y35시험패는ITExamDump제품으로 고고고!

모두 아시다시피HP HP0-Y35인증시험은 업계여서도 아주 큰 비중을 차지할만큼 큰 시험입니다. 하지만 문제는 어덯게 이 시험을 패스할것이냐이죠.HP HP0-Y35인증시험패스하기는 너무 힘들기 때문입니다. 다른사이트에 있는 자료들도 솔직히 모두 정확성이 떨어지는건 사실입니다. 하지만 우리ITExamDump의 문제와 답은 IT인증시험준비중인 모든분들한테 필요한 자료를 제공할수 있습니디. 그리고 중요한건 우리의 문제와 답으로 여러분은 한번에 시험을 패스하실수 있습니다.

HP0-Y35 덤프무료샘플다운로드하기: http://www.itexamdump.com/HP0-Y35.html

NO.1 Which protocols/technologies can be used to implement IRF MAD? (Select two.)
A. NSF/GR
B. ICMP
C. IGMP
D. BFD
E. LACP
Answer: D,E

HP   HP0-Y35시험문제   HP0-Y35자격증   HP0-Y35최신덤프

NO.2 Click the Exhibit button.
You have been asked to configure the switching engine of an HP A3000-24G PoE+ Wireless
Switch. First, you log in to the CLI of the access controller and then move to the System view. You
then attempt to issue the partial command oap co and use the Tab key to complete it. However,
the CLI does not complete the command but issues a line return instead, as shown in the exhibit.
What must you do to connect to the CLI of the switching engine?
A. Return to the User view and then issue the command.
B. Enter the OAP view and then issue the command.
C. Use the CTRL+K key combination to access the CLI of the switching engine.
D. Telnet directly to the IPaddress of the switching engine and issue the command.
Answer: A

HP   HP0-Y35   HP0-Y35 pdf   HP0-Y35

NO.3 Given an HP A5800 switch that is in its factory default configuration, what happens after the
following command sequence? (Note: There is no save command.) system-view irf member 1
renumber 2 quit reboot
A. The IRF member ID will be 1.
B. The IRF member ID will be 2.
C. The IRF member ID will be assigned dynamically.
D. The IRF member ID will be "unknown."
Answer: B

HP   HP0-Y35   HP0-Y35 dump   HP0-Y35

NO.4 Click the Exhibit button.
A network administrator is managing an HP A-Series Wireless Access Controller at the command
line interface (CLI). The administrator issues a command to view the contents of the controller
flash directory. Looking at the output, which access point models can the controller boot and
command to view the contents of the controller? flash directory. Looking at the output, which
access point models can the controller boot and manage? (Select two.)
A. HP WA2220-AG
B. HP WA2612-AGN
C. HP WA2620-AGN
D. HP WA2610E-AGN
E. HP WA2620E-AGN
Answer: B,C

HP기출문제   HP0-Y35   HP0-Y35   HP0-Y35

NO.5 You have been asked to deploy an additional HP A-Series wireless access point in the conference room
of an advertising agency. You connect to the CLI of the access controller and create an AP management
template. In which view do you specify the serial number of the access point?
A. Radio view
B. Service Template view
C. AP view
D. ESS Interface view
Answer: C

HP dump   HP0-Y35 dump   HP0-Y35시험문제

NO.6 Which roles are supported by the sFlow standard?
A. agent and collector only
B. probe and collector only
C. agent, collector, and analyzer
D. probe, collector, and analyzer
Answer: A

HP dumps   HP0-Y35   HP0-Y35 dump   HP0-Y35   HP0-Y35

NO.7 Click the Exhibit button.
You have recently upgraded the Comware of an HP A-Series Access Controller (AC). Prior to
rebooting the device, you issued the dir command to display the contents of the flash root
directory. Upon reboot, the AC does not successfully run the new version of firmware. What is the issue?
A. The device does not have enough memory to run the new firmware.
B. The filename of the firmware is incorrect.
C. The new firmware is not present in the root directory.
D. Thebootware of the device requires updating as well.
Answer: B

HP   HP0-Y35   HP0-Y35

NO.8 Which sampling mechanisms are available in sFlow in A-Series switches and routers? (Select
two.)
A. packet-based
B. packet-length-based
C. time-based
D. ip-protocol-based
E. ip-source-address-based
F. mac-address-based
Answer: A,C

HP덤프   HP0-Y35 dump   HP0-Y35   HP0-Y35

NO.9 After a MAD enabled IRF-stack splits, what happens to the part of the stack that entered Recovery
state?
A. All ports, except for the IRF-ports, BFD enabled ports, and console ports are shut down.
B. All ports, except for the IRF-ports, LACP enabled Link aggregation groups, console ports, and
manually excluded ports are shut down.
C. All ports, except for the IRF-ports, console ports, and manually excluded ports, are shut down.
D. All ports except for manually excluded ports are shut down.
Answer: C

HP   HP0-Y35 dumps   HP0-Y35   HP0-Y35   HP0-Y35 pdf   HP0-Y35 pdf

NO.10 Using HP A5800 switches, which element must be configured in all switches involved in Layer 2
remote port mirroring?
A. remote-mirroring group
B. mirroring-ingress port
C. monitor-egress port
D. remote-probe VLAN
Answer: D

HP   HP0-Y35   HP0-Y35   HP0-Y35   HP0-Y35덤프

NO.11 You have been asked to deploy a guest wireless service within an A-Series solution in the
reception area of a marketing firm. The clients associated with the guest service should be
assigned to VLAN 10. In which view do you assign the VLAN to the wireless service?
A. System view
B. Service Template view
C. VLAN Interface view
D. ESS Interface view
Answer: D

HP   HP0-Y35   HP0-Y35   HP0-Y35   HP0-Y35자료   HP0-Y35기출문제

NO.12 What are acceptable topologies for an IRF-Stack? (Select two.)
A. star
B. tree
C. daisy-chain
D. mesh
E. ring
Answer: C,E

HP   HP0-Y35 dump   HP0-Y35

NO.13 Click the Exhibit button.
An IRF-stack is being built using HP A5800 switches, and IRF member 1 will be connected to IRF
member 2 using IRF-port 2. Which IRF-port should it be connected to?
A. 1
B. 2
C. 3
D. any
Answer: A

HP dump   HP0-Y35기출문제   HP0-Y35인증   HP0-Y35인증   HP0-Y35 dump   HP0-Y35

NO.14 Click the Exhibit button.
When IRF with Distributed Link Aggregation is implemented at all layers of a LAN (Core,
Aggregation, and Access), which protocols can be replaced by IRF functions? (Select two.)
A. MSTP
B. LACP
C. BFD
D. NSF/GR
E. VRRP
Answer: A,E

HP pdf   HP0-Y35 dump   HP0-Y35최신덤프   HP0-Y35인증   HP0-Y35최신덤프

NO.15 In an IRF stack, which operational plane is centralized (in the Master) and which is distributed
(among all members)?
A. Management: centralized
Control: centralized
Forwarding: centralized
B. Management: distributed
Control: distributed
Forwarding: distributed
C. Management: centralized
Control: distributed
Forwarding: distributed
D. Management: distributed
Control: centralized
Forwarding: distributed
E. Management: centralized
Control: centralized
Forwarding: distributed
Answer: E

HP   HP0-Y35인증   HP0-Y35

ITexamdump의 648-238덤프의 VCE테스트프로그램과 MB6-700덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 HP2-Z25시험에 대비한 고품질 덤프와 000-955시험 최신버전덤프를 제공해드립니다. 최고품질 ECP-102시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/HP0-Y35.html

댓글 없음:

댓글 쓰기