Microsoft 70-505인증시험은 전문적인 관련지식을 테스트하는 인증시험입니다. ITExamDump는 여러분이Microsoft 70-505인증시험을 통과할 수 잇도록 도와주는 사이트입니다. 많은 분들이 많은 시간과 돈을 들여 혹은 여러 학원 등을 다니면서Microsoft 70-505인증시험패스에 노력을 다합니다. 하지만 우리ITExamDump에서는 20시간 좌우만 투자하면 무조건Microsoft 70-505시험을 패스할 수 있도록 도와드립니다.
ITExamDump의Microsoft인증 70-505시험대비 덤프는 가격이 착한데 비하면 품질이 너무 좋은 시험전 공부자료입니다. 시험문제적중율이 높아 패스율이 100%에 이르고 있습니다.다른 IT자격증에 관심이 있는 분들은 온라인서비스에 문의하여 덤프유무와 적중율등을 확인할수 있습니다. Microsoft인증 70-505덤프로 어려운 시험을 정복하여 IT업계 정상에 오릅시다.
시험 번호/코드: 70-505
시험 이름: Microsoft (TS: Microsoft .NET Framework 3.5,Windows Forms Application Development)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 103 문항
업데이트: 2014-04-02
영어가 서툴러 국제승인 인기 IT인증자격증 필수시험 과목인Microsoft인증 70-505시험에 도전할 엄두도 낼수 없다구요? 이런 생각은 이글을 보는 순간 버리세요. Microsoft인증 70-505시험을 패스하려면ITExamDump가 고객님의 곁을 지켜드립니다. ITExamDump의Microsoft인증 70-505덤프는 Microsoft인증 70-505시험패스 특효약입니다. 영어가 서툴러고 덤프범위안의 문제만 기억하면 되기에 영어로 인한 문제는 걱정하지 않으셔도 됩니다.
ITExamDump의 Microsoft인증 70-505덤프를 구매하여 공부한지 일주일만에 바로 시험을 보았는데 고득점으로 시험을 패스했습니다.이는ITExamDump의 Microsoft인증 70-505덤프를 구매한 분이 전해온 희소식입니다. 다른 자료 필요없이 단지 저희Microsoft인증 70-505덤프로 이렇게 어려운 시험을 일주일만에 패스하고 자격증을 취득할수 있습니다.덤프가격도 다른 사이트보다 만만하여 부담없이 덤프마련이 가능합니다.구매전 무료샘플을 다운받아 보시면 믿음을 느낄것입니다.
ITExamDump에서 출시한 Microsoft 인증 70-505시험덤프는ITExamDump의 엘리트한 IT전문가들이 IT인증실제시험문제를 연구하여 제작한 최신버전 덤프입니다. 덤프는 실제시험의 모든 범위를 커버하고 있어 시험통과율이 거의 100%에 달합니다. 제일 빠른 시간내에 덤프에 있는 문제만 잘 이해하고 기억하신다면 시험패스는 문제없습니다.
70-505 덤프무료샘플다운로드하기: http://www.itexamdump.com/70-505.html
NO.1 You are creating a Windows Forms application by using the .NET Framework 3.5 The application is
used by a financial service provider.
You discover that the service provider transfers large amounts of data by using XML.
You need to read and validate the XMLdocuments in the most time efficient manner.
Which technology should you use?
A. The XmlReader class
B. The XmlDocument class
C. The XmlResolver class
D. The LINQ to XML method
Answer: A
Microsoft 70-505 70-505자격증
NO.2 You are creating a Windows Forms application by using the .NET Framework 3.5.
You have implemented the PrintPage event to send the page output to the printer.
The users must select the printer and the page range before printing.
You need to ensure that users can print the content of the form by clicking the button control.
Which code segment should you use?
A. PageSetupDialog pageSetupDialog1 = new PageSetupDialog() ;
pageSetupDialog1.Document = printDocument1 ;
DialogResult result = pageSetupDialog1.ShowDialog() ;
if(result == DialogResult.OK)
{
printDocument1.Print();
}
B. PageSetupDialog pageSetupDialog1 = new PageSetupDialog();
pageSetupDialog1.Document = printDocument1;
DialogResult result = pageSetupDialog1.ShowDialog();
if (result == DialogResult.Yes)
{
printDocument1.Print();
}
C. PrintDialog printDialog1 = new PrintDialog();
printDialog1.AllowSomePages = true;
printDialog1.Document = printDocument1;
DialogResult result = printDialog1.ShowDialog();
if (result == DialogResult.OK)
{
printDocument1.Print();
}
D. PrintDialog printDialog1 = new PrintDialog();
printDialog1.AllowSomePages = true;
printDialog1.Document = printDocument1;
DialogResult result = printDialog1.ShowDialog();
if (result == DialogResult.Yes)
{
printDocument1.Print();
}
Answer: C
Microsoft 70-505 70-505 70-505 70-505
NO.3 You are creating a Windows application by using the .NET Framework 3.5.
You plan to create a form that might result in a timeconsuming operation.
You use the QueueUserWorkItem method and a Label control named lblResult.
You need to update the users by using the lblResult control when the process has completed the
operation.
Which code segment should you use?
A. private void DoWork(object myParameter){
// thread work
this.Invoke(new MethodInvoker(ReportProgress)) ;
}
private void ReportProgress();{
this.lblResult.Text = "Finished Thread";
}
B. private void DoWork(object myParameter){
// thread work
this.lblResult.Text = "Finished.Thread";
}
C. private void DoWork(object myParameter){
// thread work
System.Threading.Monitor.Enter(this);
this.lblResult.Text = "Finished.Thread";
System.Threading.Monitor.Exit(this);
}
D. private void DoWork(object myParameter){
// thread work
System.Threading.Monitor.TryEnter(this);
ReportProgress();
}
private void ReportProgress(){
this.lblResult Text = "Finished.Thread";
}
Answer: A
Microsoft 70-505자료 70-505덤프 70-505
NO.4 You are creating a Windows Forms application for a courier company by using the .NET Framework 3.5.
You create a form that allows customers to track the progress of their shipments.
The form contains the following elements:
- A text box named txtTN that allows users to enter a tracking number
- An ErrorProvider control named ErrorProvider1 that informs users of an invalid tracking number
- A function named ValidTrackingNumber that validates tracking numbers
You need to ensure that the txtTN text box is validated, which code segment should you use?
A. private void txtTN_Validating(object sender, CancelEventArgs e) {
if (!ValidTrackingNumber(txtTN.Text)){
errorProvider1.SetError(txtTN, "InvalidTracking Number")
e.Cancel = true;
}
else
errorProvider1.SetError(txtTN, "")
}
B. private void txtTN_Validating(object sender, CancelEventArgs e){
if (!ValidTrackingNumber(txtTN.Text))
errorProvider1.SetError(txtTN, "Invalid Tracking Number")
else{
errorProvider1.SetError(txtTN, "")
e.Cancel = true
}
}
C. private void txtTN_Validated(object sender, EventArgs e){
if (!ValidTrackingNumber(txtTN.Text))
errorProvider1.SetError(txtTN, "Invalid Tracking Number")
else{
errorProvider1.SetError(txtTN, "")
txtTN.Focus()
}
}
D. private void txtTN_Validated(object sender, EventArgs e){
if (!ValidTrackingNumber(txtTN.Text))
{
errorProvider1.SetError(txtTN, "InvalidTracking Number")
txtTN.Focus()
}
else
errorProvider1.SetError(txtTN, "")
}
Answer: A
Microsoft자료 70-505 70-505자료 70-505
NO.5 You are creating a Windows Forms application by using the .NET Framework 3.5.
The application is configured to use rolebased security.
You need to ensure that users can print reports only by selecting a printer from the printer dialog box.
You want to achieve this goal by using the minimum level of permission.
Which code segment should you use?
A. [System.Drawing.Printing.PrintingPermission (System.Security.Permissions.SecurityAction.Demand,
Level=System.Drawing.Printing.PrintingPermissionLevel.AllPrinting)];
B. [System.Drawing.Printing.PrintingPermission (System.Security.Permissions.SecurityAction.Demand,
Level=System.Drawing.Printing.PrintingPermissionLevel.NoPrinting)];
C. [System.Drawing.Printing.PrintingPermission (System.Security.Permissions.SecurityAction.Demand,
Level=System.Drawing.Printing.PrintingPermissionLevel.DefaultPrinting)];
D. [System.Drawing.Printing.PrintingPermission (System.Security.Permissions.SecurityAction.Demand,
Level=System.Drawing.Printing.PrintingPermissionLevel.SafePrinting)];
Answer: D
Microsoft기출문제 70-505덤프 70-505 dump 70-505기출문제 70-505자격증 70-505
NO.6 You are creating a Windows Forms application by using the .NET Framework 3.5.
The application stores a list of part numbers in an integer based array as shown in the following code
segment (Line numbers are included for reference only)
01 var parts = new int[]
02 { 105, 110, 110, 235, 105, 03 135, 137, 205, 105, 100, 100 } ;
03
04
05 foreach (var item in results) {
06 tbResults.Text.+= item + "\r\n";
07 }
You need to use a LINQ to Objects query to perform the following tasks:
- Obtain a list of duplicate part numbers
- Order the list by part numbers
- Provide the part numbers and the total count of part numbers in the results
Which code segment should you insert at line 04 ?
A. var results = (from n in parts orderby n group n by n into n1 select new { n1.Key, count = n1.Count() })
Distinct();
B. var results = (from n in parts group n by n into n1 where n1.Count() > 1 orderby n1 select new
{ n1.Key, count = n1.Count() });
C. var results = (from n in parts orderby n group n by n into n1 where n1.Count() > 1 select n1);
D. var results = (from n in parts orderby n group n by n into n1 where n1.Count() > 1 select new { n1.Key,
count = n1.Count() });
Answer: D
Microsoft시험문제 70-505 70-505인증 70-505덤프
NO.7 You are creating a Windows Forms application by using the .NET Framework 3.5.
The application requires a thread that accepts a single integer parameter.
You write the following code segment (Line numbers are included for reference only.)
01 Thread myThread = new Thread(new ParameterizedThreadStart(DoWork)) ;
02 myThread.Start(100);
03
You need to declare the method signature of the DoWork method.
Which method signature should you use?
A. public void DoWork();
B. public void DoWork(int nCounter);
C. public void DoWork(object oCounter);
D. public void DoWork(Delegate oCounter);
Answer: C
Microsoft자료 70-505 70-505
NO.8 You are creating a Windows Forms application by using the .NET Framework 3.5.
You create a new form in your application.
You add a PrintDocument control named pntDoc to the form.
To support the print functionality, you write the following code segment in the application
(Line numbers are included for reference only.)
01 pntDoc.BeginPrint += new.PrintEventHandler(PrintDoc_BeginPrint) ;
02
03 bool.canPrint = CheckPrintAccessControl() ;
04 if (!canPrint) {
05
06 }
07
You need to ensure that the following requirements are met:
- When the user has no print access, font and file stream initializations are not executed and the print
operation is cancelled
- Print operations are logged whether or not the user has print access
What should you do ?
A. Add the following code segment at line 05
pntDoc.BeginPrint -= new PrintEventHandler(PrintDoc_BeginPrint);
pntDoc.BeginPrint += new PrintEventHandler((obj, args) => args.Cancel = true);
Add the following code segment at line 07
pntDoc.BeginPrint += new PrintEventHandler((obj1, args1) => LogPrintOperation());
B. Add the following code segment at line 05
pntDoc.BeginPrint += new PrintEventHandler(delegate(object.obj, PrintEventArgs.args){});
Add the following code segment at line 07
pntDoc.BeginPrint -= new PrintEventHandler(PrintDoc_BeginPrint);
pntDoc.BeginPrint += new PrintEventHandler((obj1, args1) => LogPrintOperation());
C. Add the following code segment at line 05
pntDoc.BeginPrint -= new PrintEventHandler(PrintDoc_BeginPrint);
pntDoc.BeginPrint -= new PrintEventHandler(delegate(object.obj, PrintEventArgs.args){});
Add the following code segment at line 07
pntDoc.BeginPrint -= new PrintEventHandler((obj1, args1) => LogPrintOperation());
D. Add the following code segment at line 05
pntDoc.BeginPrint += new PrintEventHandler((obj, args) => args.Cancel = true);
Add the following code segment at line 07
pntDoc.BeginPrint += new PrintEventHandler(PrintDoc_BeginPrint);
pntDoc.BeginPrint -= new PrintEventHandler((obj1, args1) => LogPrintOperation());
Answer: A
Microsoft자격증 70-505 70-505 70-505 70-505
NO.9 You are creating a Windows application by using the .NET Framework 3.5.
You add a BackgroundWorker component to a Windows form to handle a timeconsuming operation.
You add a Cancel button to the form.
You need to ensure that when the Cancel button is pressed, the background task is cancelled.
What should you do?
A. Set the DoWorkEventArgs.Cancel property to False in the DoWork event handler of
BackgroundWorker.
B. Call the BackgroundWorker.CancelAsync() method from the OnClick event handler of the Cancel
button.
C. Call the BackgroundWorker.CancelAsync() method from the DoWork event handler of the
BackgroundWorker.
D. Stop the process in the OnClick event handler of the Cancel button if the
BackgroundWorker.CancellationPending property is True.
Answer: B
Microsoft 70-505 70-505 70-505 70-505기출문제
NO.10 You are creating a Windows Forms application for the design of circuit boards and electronic equipment.
You use the .NET Framework 3.5 to create the application x that allows designers to preview designs
before printing them.
The previewed documents must meet the following requirements:
- The graphics and text are displayed clearly
- The fullscale preview is set as default for the documents
- The zoom setting of the preview control is adjusted automatically when the form is resized
You need to ensure that the requirements are met when the form that contains the custom print preview
control is displayed.
Which code segment should you use?
A. printPreviewControl1.UseAntiAlias = true ;
printPreviewControl1.AutoZoom = true ;
printPreviewControl1.Zoom = 1.0 ;
B. printPreviewControl1.UseAntiAlias = true ;
printPreviewControl1.AutoZoom = true ;
printPreviewControl1.Zoom = 100.0 ;
C. printPreviewControl1.UseAntiAlias = true ;
printPreviewControl1.AutoZoom = false ;
printPreviewControl1.Zoom = 1.0 ;
D. printPreviewControl1.UseAntiAlias = false ;
printPreviewControl1.AutoZoom = false ;
printPreviewControl1.Zoom = 100.0;
Answer: A
Microsoft 70-505자격증 70-505 70-505자격증
NO.11 You are creating a Windows Forms application by using the .NET Framework 3.5.
You plan to deploy the application in multiple countries and languages.
You need to ensure that the application meets the globalization requirements.
Which two actions should you perform (Each correct answer presents part of the solution, choose two )?
A. Handle server names and URLs as ASCII data
B. Use Unicode strings throughout the application
C. Use the NumberFormatInfo class for numeric formatting
D. Handle strings as a series of individual characters instead of entire strings
E. Avoid usage of the SortKey class and the CompareInfo class for sorting purposes
Answer: BC
Microsoft 70-505덤프 70-505
NO.12 You are creating a Windows Forms application by using the .NET Framework 3.5.
You use LINQ expressions to read a list of customers from the following XML file.
<customers>
<customer id="135" birthDate="4/1/1968"> Paul Koch </customer>
<customer id="122" birthDate="7/5/1988"> Bob Kelly </customer>
<customer id="044" birthDate="3/24/1990"> Joe Healy </customer>
<customer id="982" birthDate="9/15/1974"> Matt Hink </customer>
<customer id="325" birthDate="1/7/2004"> Tom Perham </customer>
<customer id="134" birthDate="9/23/1946"> Jeff Hay </customer>
<customer id="653" birthDate="5/15/1947"> Kim Shane </customer>
<customer id="235" birthDate="4/24/1979"> Mike Ray </customer>
</customers>
You need to obtain a list of names of customers who are 21 years of age or older.
Which code segment should you use ?
A. XDocument customers = XDocument.Load("Customers.xml");
var results = from c in customers.Descendants("customer") where
((DateTime)c.Attribute("birthDate")).AddYears(21)< DateTime.Now select.c.Attribute("Name") ;
B. XDocument customers = XDocument.Load("Customers.xml");
var results = from c in customers.Descendants("customer") where
((DateTime)c.Attribute("birthDate")).AddYears(21)< DateTime.Now select new { FullName = c.Value } ;
C. XDocument customers = XDocument.Load("Customers.xml");
var results = from c in customers.Descendants("customer") where
((DateTime)c.Attribute("birthDate")).AddYears(21)< DateTime.Now select c.Element("customer") ;
D. XDocument customers = XDocument.Load("Customers.xml")
var results = from c in customers.Descendants() where ((DateTime)c.Attribute("birthDate")).AddYears(21)
< DateTime.Now select new { FullName = c.Value};
Answer: B
Microsoft기출문제 70-505 dumps 70-505 70-505 70-505
NO.13 You are creating a Windows Forms application by using the .NET Framework 3.5.
You have resource files in five different languages.
You need to test the application in each language.
What should you do?
A. Set the CurrentCulture property explicitly to the respective culture for each language.
B. Set the CurrentCulture property explicitly to IsNeutralCulture for each language.
C. Set the CurrentUICulture property explicitly to IsNeutralCulture for each language.
D. Set the CurrentUICulture property explicitly to the respective culture for each language.
Answer: D
Microsoft 70-505 70-505자료 70-505
NO.14 You are creating a Windows Forms application that has the print functionality by using the .NET
Framework 3.5.
You implement the PrintPage page event for the form.
You associate an instance of the PrintDocument control along with an instance of the PrintPreviewDialog
control named prevDialog1.
You want to set the default size of the PrintPreviewDialog class to full screen.
You need to provide a print preview for the user by adding a code segment to the Click event of the button
on the form.
Which code segment should you use.?
A. prevDialog1.Width = Screen.PrimaryScreen.Bounds.Width;
prevDialog1.Height = Screen.PrimaryScreen.Bounds.Height;
prevDialog1.ShowDialog() ;
B. prevDialog1.Width = 1024 ;
prevDialog1.Height = 768 ;
prevDialog1.ShowDialog() ;
C. prevDialog1.Width = prevDialog1.PrintPreviewControl.Width ;
prevDialog1.Height.= prevDialog1.PrintPreviewControl.Height;
prevDialog1.ShowDialog() ;
D. prevDialog1.Width = prevDialog1.PrintPreviewControl.Width ;
prevDialog1.Height.= prevDialog1.PrintPreviewControl.Height;
prevDialog1.Update();
Answer: A
Microsoft pdf 70-505 70-505 pdf 70-505덤프 70-505기출문제 70-505 dump
NO.15 You are creating a Windows application for graphical image processing by using the .NET Framework
3.5.
You create an image processing function and a delegate.
You plan to invoke the image processing function by using the delegate.
You need to ensure that the calling thread meets the following requirements:
- It is not blocked when the delegate is running
- It is notified when the delegate is complete
What should you do?
A. Call the Invoke method of the delegate.
B. Call the BeginInvoke and EndInvoke methods of the delegate in the calling thread.
C. Call the BeginInvoke method by specifying a callback method to be executed when the delegate is
complete Call the EndInvoke method in the callback method.
D. Call the BeginInvoke method by specifying a callback method to be executed when the delegate is
complete Call the EndInvoke method of the delegate in the calling thread.
Answer: C
Microsoft 70-505 70-505 dump 70-505
ITexamdump의 NS0-155덤프의 VCE테스트프로그램과 1Y0-400덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 70-342시험에 대비한 고품질 덤프와 3103시험 최신버전덤프를 제공해드립니다. 최고품질 C_HANAIMP131시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기