우리ITExamDump에서는 각종IT시험에 관심있는분들을 위하여, 여러 가지 인증시험자료를 제공하는 사이트입니다. 우리ITExamDump는 많은 분들이 IT인증시험을 응시하여 성공할수록 도와주는 사이트입니다. 우리의 파워는 아주 대단하답니다. 여러분은 우리ITExamDump 사이트에서 제공하는Microsoft 070-511관련자료의 일부분문제와답등 샘플을 무료로 다운받아 체험해봄으로 우리에 믿음이 생기게 될 것입니다.
Microsoft 070-511인증시험도 어려울 뿐만 아니라 신청 또한 어렵습니다.Microsoft 070-511시험은 IT업계에서도 권위가 있고 직위가 있으신 분들이 응시할 수 있는 시험이라고 알고 있습니다. 우리 ITExamDump에서는Microsoft 070-511관련 학습가이드를 제동합니다. ITExamDump 는 우리만의IT전문가들이 만들어낸Microsoft 070-511관련 최신, 최고의 자료와 학습가이드를 준비하고 있습니다. 여러분의 편리하게Microsoft 070-511응시하는데 많은 도움이 될 것입니다.
Microsoft인증070-511시험에 도전해보려고 없는 시간도 짜내고 거금을 들여 학원을 선택하셨나요? 사실 IT인증시험은 보다 간단한 공부방식으로 준비하시면 시간도 돈도 정력도 적게 들일수 있습니다. 그 방법은 바로ITExamDump의Microsoft인증070-511시험준비덤프자료를 구매하여 공부하는 것입니다. 문항수도 적고 시험예상문제만 톡톡 집어 정리된 덤프라 시험합격이 한결 쉬워집니다.
ITExamDump는 모든 IT관련 인증시험자료를 제공할 수 있는 사이트입니다. 우리ITExamDump는 여러분들한테 최고 최신의 자료를 제공합니다. ITExamDump을 선택함으로 여러분은 이미Microsoft 070-511시험을 패스하였습니다. 우리 자료로 여러분은 충분히Microsoft 070-511를 패스할 수 있습니다. 만약 시험에서 떨어지셨다면 우리는 백프로 환불은 약속합니다. 그리고 갱신이 된 최신자료를 보내드립니다. 하지만 이런사례는 거이 없었습니다.모두 한번에 패스하였기 때문이죠. ITExamDump는 여러분이Microsoft 070-511인증시험 패스와 추후사업에 모두 도움이 되겠습니다. Pass4Tes의 선택이야말로 여러분의 현명한 선택이라고 볼수 있습니다. Pass4Tes선택으로 여러분은 시간도 절약하고 돈도 절약하는 일석이조의 득을 얻을수 있습니다. 또한 구매후 일년무료 업데이트버전을 바을수 있는 기회를 얻을수 있습니다.
시험 번호/코드: 070-511
시험 이름: Microsoft (TS: Windows Applications Development with Microsoft .NET Framework 4)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 156 문항
업데이트: 2014-02-16
ITExamDump에서 Microsoft인증 070-511덤프를 구입하시면 퍼펙트한 구매후 서비스를 제공해드립니다. Microsoft인증 070-511덤프가 업데이트되면 업데이트된 최신버전을 무료로 서비스로 드립니다. 시험에서 불합격성적표를 받으시면 덤프구매시 지불한 덤프비용은 환불해드립니다.
ITExamDump의 Microsoft인증 070-511시험덤프는 실제시험의 기출문제와 예상문제를 묶어둔 공부자료로서 시험문제커버율이 상당히 높습니다.IT업계에 계속 종사하려는 IT인사들은 부단히 유력한 자격증을 취득하고 자신의 자리를 보존해야 합니다. ITExamDump의 Microsoft인증 070-511시험덤프로 어려운 Microsoft인증 070-511시험을 쉽게 패스해보세요. IT자격증 취득이 여느때보다 여느일보다 쉬워져 자격증을 많이 따는 꿈을 실현해드립니다.
ITExamDump는 여러 it인증에 관심 있고 또 응시하고 싶으신 분들에게 편리를 드립니다. 그리고 많은 분들이 이미 ITExamDump제공하는 덤프로 it인증시험을 한번에 패스를 하였습니다. 즉 우리 ITExamDump 덤프들은 아주 믿음이 가는 보장되는 덤프들이란 말이죠. ITExamDump에는 베터랑의전문가들로 이루어진 연구팀이 잇습니다, 그들은 it지식과 풍부한 경험으로 여러 가지 여러분이Microsoft인증070-511시험을 패스할 수 있을 자료 등을 만들었습니다 여러분이Microsoft인증070-511시험에 많은 도움이070-511될 것입니다. ITExamDump 가 제공하는070-511테스트버전과 문제집은 모두070-511인증시험에 대하여 충분한 연구 끝에 만든 것이기에 무조건 한번에070-511시험을 패스하실 수 있습니다.
070-511 덤프무료샘플다운로드하기: http://www.itexamdump.com/070-511.html
NO.1 You use Microsoft .NET Framework 4 to create a Windows Presentation Foundation (WPF)
application.
You write the following code segment. (Line numbers are included for reference only.)
01public class Contact
02{
03private string _contactName;
04
05public string ContactName {
06get { return _contactName; }
07set { _contactName = value; }
08}
09
10}
You add the following code fragment within a WPF window control.
<TextBox>
<TextBox.Text>
<Binding Path="ContactName" UpdateSourceTrigger="PropertyChanged">
<Binding.ValidationRules>
<DataErrorValidationRule />
</Binding.ValidationRules>
</Binding>
</TextBox.Text>
</TextBox>
The TextBox control is data-bound to an instance of the Contact class.
You need to ensure that the Contact class contains a business rule to ensure that the ContactName
property is not empty or NULL.
You also need to ensure that the TextBox control validates the input data.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two).
A. Replace line 01 with the following code segment. public class Contact : IDataErrorInfo
B. Replace line 01 with the following code segment. public class Contact : ValidationRule
C. Replace line 01 with the following code segment. public class Contact : INotifyPropertyChanging
D. Add the following code segment at line 04. public event PropertyChangingEventHandler
PropertyChanging;
E. Modify line 07 with the following code segment:
set {
if (this.PropertyChanging != null)
PropertyChanging(this, new
PropertyChangingEventArgs("ContactName"));
if (string.IsNullOrEmpty(value))
throw new ApplicationException("Contact name is required");
_contactName = value;
}
F. Add the following code segment at line 09.
public string Error {
public string this[string columnName] {
get {
if (columnName == "ContactName" &&
string.IsNullOrEmpty(this.ContactName))
return "Contact name is required";
return null;
}
}
Answer: AF
Microsoft 070-511자격증 070-511시험문제 070-511
NO.2 You use Microsoft .NET Framework 4 to create a Windows Presentation Foundation (WPF) application.
The application has a window named MainWindow that has a StackPanel control named sp as the root
element.
You want to create a Button control that contains a TextBlock control with the "Save" Text property.
You need to create the control dynamically and add the control to sp.
Which code segment should you write in the constructor of the MainWindow class?
A. Button btn = new Button();
TextBlock text = new TextBlock();
text.Text = "Save";
btn.Content = text;
sp.DataContext = btn;
B. Button btn = new Button();
TextBlock text = new TextBlock();
text.Text = "Save";
btn.Content = text;
sp.Children.Add(btn);
C. Button btn = new Button();
TextBlock text = new TextBlock();
text.Text = "Save";
sp.Children.Add(btn);
sp.Children.Add(text);
D. Button btn = new Button();
TextBlock text = new TextBlock();
text.Text = "Save";
btn.ContentTemplateSelector.SelectTemplate(text, null);
sp.Children.Add(btn);
Answer: B
Microsoft자격증 070-511 070-511시험문제 070-511자격증 070-511자격증 070-511
NO.3 You use Microsoft .NET Framework 4 to create a Windows Forms application.
You add a new class named Customer to the application.
You select the Customer class to create a new object data source.
You add the following components to a Windows Form:
- A BindingSource component named customerBindingSource that is data-bound to the Customer object
data source.
- A set of TextBox controls to display and edit the Customer object properties.
- Each TextBox control is data-bound to a property of the customerBindingSource component.
- An ErrorProvider component named errorProvider that validates the input values for each TextBox
control.
You need to ensure that the input data for each TextBox control is automatically validated by using the
ErrorProvider component.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Implement the validation rules inside the Validating event handler of each TextBox control by throwing
an exception when the value is invalid.
B. Implement the validation rules inside the TextChanged event handler of each TextBox control by
throwing an exception when the value is invalid.
C. Implement the validation rules inside the setter of each property of the Customer class by throwing an
exception when the value is invalid.
D. Add the following code segment to the InitializeComponent method of the Windows Form.
this.errorProvider.DataSource = this.customerBindingSource;
E. Add the following code segment to the InitializeComponent method of the Windows Form.
this.errorProvider.DataSource = this.customerBindingSource.DataSource;
this.errorProvider.DataMember = this.customerBindingSource.DataMember;
Answer: CD
Microsoft 070-511시험문제 070-511 pdf 070-511 070-511자료
NO.4 You use Microsoft Visual Studio 2010 and Microsoft .
NET Framework 4 to create a Windows Presentation Foundation (WPF) application.
You create a WPF window in the application.
You add the following code segment to the application.
public class ViewModel
{
public CollectionView Data { get; set; }
}
public class BusinessObject
{
public string Name { get; set; }
}
The DataContext property of the window is set to an instance of the ViewModel class.
The Data property of the ViewModel instance is initialized with a collection of BusinessObject objects.
You add a TextBox control to the Window.
You need to bind the Text property of the TextBox control to the Name property of the current item of the
CollectionView of the DataContext object.
You also need to ensure that when a binding error occurs, the Text property of the TextBox control is set to
N/A .
Which binding expression should you use?
A. { Binding Path=Data/Name, FallbackValue='N/A' }
B. { Binding Path=Data.Name, FallbackValue='N/A' }
C. { Binding Path=Data/Name, TargetNullValue='N/A' }
D. { Binding Path=Data.Name, TargetNullValue='N/A' }
Answer: A
Microsoft 070-511최신덤프 070-511덤프
NO.5 You use Microsoft .NET Framework 4 to create a Windows Presentation Foundation (WPF) application.
You write the following code fragment.
<StackPanel>
<StackPanel.Resources>
<Style TargetType="{x:Type Button}">
<EventSetter Event="Click" Handler="ButtonHandler"/>
</Style>
</StackPanel.Resources>
<Button Name="OkButton">Ok</Button>
<Button Name="CancelButton" Click="CancelClicked">Cancel</Button>
</StackPanel>
You need to ensure that the ButtonHandler method is not executed when the user clicks the CancelButton
button.
Which code segment should you add to the code-behind file?
A. private void CancelClicked(object sender, RoutedEventArgs e)
{
Button btn = (Button)sender;
btn.Command = null;
}
B. private void CancelClicked(object sender, RoutedEventArgs e) {
Button btn = (Button)sender;
btn.IsCancel = true;
}
C. private void CancelClicked(object sender, RoutedEventArgs e) {
e.Handled = true;
}
D. private void CancelClicked(object sender, RoutedEventArgs e) {
e.Handled = false;
}
Answer: C
Microsoft 070-511 070-511 dumps 070-511
NO.6 You use Microsoft .NET Framework 4 to create a Windows Presentation Foundation (WPF)
application.
You write the following code segment.
public class Contact { private string _contactName;
public string ContactName {
get { return _contactName; }
set {
if (string.IsNullOrEmpty(value))
throw new ApplicationException("Contact name is required");
_contactName = value;
}
}
}
You add the following code fragment in a WPF window control.
<TextBox Text="{Binding Path=ContactName, ValidatesOnExceptions=True,
UpdateSourceTrigger=PropertyChanged}" />
The TextBox control is data-bound to an instance of the Contact class. You plan to implement an
ErrorTemplate in the TextBox control.
You need to ensure that the validation error message is displayed next to the TextBox control. Which code
fragment should you use?
A. <ControlTemplate>
<DockPanel>
<AdornedElementPlaceholder Name="box" />
<TextBlock Text="{Binding ElementName=box,
Path=AdornedElement.(Validation.Errors)[0].ErrorContent}" Foreground="Red" />
</DockPanel>
</ControlTemplate>
B. <ControlTemplate>
<DockPanel>
<AdornedElementPlaceholder Name="box" />
<TextBlock Text="{Binding ElementName=box, Path=(Validation.Errors)[0].Exception.Message}"
Foreground="Red" />
</DockPanel>
</ControlTemplate>
C. <ControlTemplate>
<DockPanel>
<ContentControl Name="box" />
<TextBlock Text="{Binding ElementName=box,
Path=ContentControl.(Validation.Errors)[0].ErrorContent}" Foreground="Red" />
</DockPanel>
</ControlTemplate>
D. <ControlTemplate>
<DockPanel> <ContentControl Name="box" />
<TextBlock Text="{Binding ElementName=box, Path=(Validation.Errors)[0].Exception.Message}"
Foreground="Red" />
</DockPanel>
</ControlTemplate>
Answer: A
Microsoft pdf 070-511 070-511 070-511 dumps 070-511
NO.7 You use Microsoft .NET Framework 4 to create a Windows Presentation Foundation (WPF) application.
The application contains a composite user control that includes a TextBox control named txtInput.
The user control will be hosted in a window and will have handlers for the text-changed event of txtInput.
You need to ensure that the application meets the following requirements:
AddHandler (TextBox.TextChangedEvent, new RoutedEventHandler (Audit_TextChanged), true);
Which of the following statments are TRUE? (choose all that apply)
A. A text-changed event handler, named Audit_TextChanged, was Created for the txtInput control.
B. Audit_TextChanged will stop running because the event is marked as handled by certain event
handlers.
C. Even through the event is marked handled by certain event handlers, Audit_TextChanged will still run.
D. Audit_TextChanged will continue to run until the event is marked as handled.
Answer: AC
Microsoft dump 070-511 070-511자격증 070-511인증
NO.8 You use Microsoft .NET Framework 4 to create a Windows Forms application.
You plan to use a Windows Presentation Foundation (WPF) control of the UserControl1 type hosted in an
ElementHost control named elementHost1.
You write the following code segment. (Line numbers are included for reference only.)
01public class WPFInWinForms {
02public WPFInWinForms
03{
04InitializeComponent();
05
06}
07private void OnBackColorChange(object sender, String propertyName, object value)
08{
09ElementHost host = sender as ElementHost;
10System.Drawing.Color col = (System.Drawing.Color)value;
11SolidColorBrush brush =
new SolidColorBrush(System.Windows.Medi
a.Color.FromRgb(col.R, col.G, col.B));
12UserControl1 uc1 = host.Child as UserControl1;
13uc1.Background = brush;
14}
15}
You need to ensure that the application changes the background color of the hosted control when the
background color of the form changes.
Which code segment should you insert at line 05?
A. elementHost1.PropertyMap.Remove("BackColor");
elementHost1.PropertyMap.Add("BackColor", new PropertyTranslator(OnBackColorChange));
B. elementHost1.PropertyMap.Remove("Background");
elementHost1.PropertyMap.Add("Background", new PropertyTranslator(OnBackColorChange));
C. elementHost1.PropertyMap.Add("BackColor", new PropertyTranslator(OnBackColorChange));
elementHost1.PropertyMap.Apply("BackColor");
D. elementHost1.PropertyMap.Add("Background", new PropertyTranslator(OnBackColorChange));
elementHost1.PropertyMap.Apply("Background");
Answer: A
Microsoft 070-511 070-511 070-511인증 070-511 dump
NO.9 You use Microsoft .NET Framework 4 to create a Windows Presentation Foundation (WPF) application.
You create a window that contains a Button control and a MenuItem control. Both controls are labeled
"Add sugar."
The Command properties of the Button and MenuItem controls are set to the same RoutedCommand
named AddSugarCommand.
You write the following code segment.
private void CanAddSugar (object sender, CanExecuteRoutedEventArgs e) { ... }
You need to ensure that when the CanAddSugar method sets e.CanExecute to false, the MenuItem and
Button controls are disabled.
What should you do?
A. Create an event handler for the CanExecuteChanged event of the AddSugarCommand command.
Call the CanAddSugar method from within the event handler.
B. Inherit the AddSugarCommand from the RoutedUICommand class instead of the RoutedCommand
class.
Call the CanAddSugar method from within the constructor of the AddSugarCommand command.
C. Add a CommandBinding object to the CommandBinding property of the MenuItem control.
Set the CanExecute property of the CommandBinding object to the CanAddSugar method.
D. Add a CommandBinding object to the CommandBindings property of the window.
Set the Command property of CommandBinding to the AddSugarCommand command.
Set the CanExecute property of the CommandBinding object to the CanAddSugar method.
Answer: D
Microsoft dumps 070-511 070-511덤프 070-511 070-511
NO.10 You use Microsoft .NET Framework 4 to create a Windows Presentation Foundation (WPF) application.
The application contains a composite user control that includes a TextBox control named txtInput.
The user control will be hosted in a window and will have handlers for the text-changed event of txtInput.
You need to ensure that the application meets the following requirements:
- Creates a text-changed event handler named Audit_TextChanged for the txtInput control.
- Executes Audit_TextChanged even when specific handlers mark the event as handled.
Which code segment should you add to the constructor of the user control.?
A. txtInput.TextChanged+=Audit_TextChanged;
B. AddHandler (TextBox.TextChangedEvent, new RoutedEventHandler (Audit_TextChanged), true);
C. EventManager.RegisterClassHandler (typeof (TextBox),TextBox.TextChangedEvent, new
RoutedEventHandler (Audit_TextChanged), true);
D. EventManager.RegisterClassHandler (typeof (TextBox), TextBox.TextChangedEvent, new
RoutedEventHandler (Audit_TextChanged), false);
Answer: B
Microsoft 070-511기출문제 070-511 070-511덤프
NO.11 You create a Windows client application by using Windows Presentation Foundation (WPF).
The application contains the following code fragment.
<Window.Resources>
<DataTemplate x:Key="detail">
<!--...-->
</DataTemplate>
</Window.Resources>
<StackPanel>
<ListBox Name="lbDetails">
</ListBox>
<Button Name="btnDetails">Details</Button>
</StackPanel>
You need to assign lbDetails to use the detail data template when btnDetails is clicked.
Which code segment should you write for the click event handler for btnDetails?
A. lbDetails.ItemsPanel.FindName("detail",lbDetails);
B. var tmpl = (ControlTemplate)FindResource("detail"); lbDetails.Template = tmpl;
C. var tmpl = (DataTemplate)FindName("detail"); lbDetails.ItemTemplate = tmpl;
D. var tmpl = (DataTemplate)FindResource("detail"); lbDetails.ItemTemplate=tmpl;
Answer: D
Microsoft인증 070-511 pdf 070-511시험문제 070-511 070-511 070-511최신덤프
NO.12 You use Microsoft .NET Framework 4 to create a Windows Presentation Foundation (WPF) application.
You write the following code fragment.
<StackPanel TextBox.PreviewTextInput="StackPanel_PreviewTextInput">
<TextBox Name="TxtBoxA"/>
<TextBox Name="TxtBoxB"/>
<TextBox Name="TxtBoxC"/>
</StackPanel>
You create an event handler named StackPanel_PreviewTextInput. You also have a collection of strings
named Keywords.
You need to ensure that TxtBoxA and TxtBoxB do not contain any of the strings in the Keywords
collections.
Which code segment should you use?
A. private void StackPanel_PreviewTextInput( object sender, TextCompositionEventArgs e)
{ FrameworkElement feSource = sender as FrameworkElement;
if (feSource.Name == "TxtBoxA" || feSource.Name == "TxtBoxB")
{ foreach(string keyword in Keywords)
{
if(e.Text.Contains(keyword)) {
e.Handled = false;
return;
}
}} e.Handled = true;
} }
B. private void StackPanel_PreviewTextInput( object sender, TextCompositionEventArgs e) {
FrameworkElement feSource = e.Source as FrameworkElement;
f (feSource.Name == "TxtBoxA" || feSource.Name == "TxtBoxB")
f (feSource.Name == "TxtBoxA" || feSource.Name == "TxtBoxB") {
foreach(string keyword in Keywords)
{
if(e.Text.Contains(keyword)) {
e.Handled = false;
return;
}
} e.Handled = true;
C. private void StackPanel_PreviewTextInput( object sender, TextCompositionEventArgs e)
{
FrameworkElement feSource = sender as FrameworkElement;
if (feSource.Name == "TxtBoxA" || feSource.Name == "TxtBoxB")
{ foreach(string keyword in Keywords)
{ if(e.Text.Contains(keyword)) {
e.Handled = true;
return; }
} e.Handled = false;
} }
D. private void StackPanel_PreviewTextInput( object sender, TextCompositionEventArgs e)
{ FrameworkElement feSource = e.Source as FrameworkElement;
if (feSource.Name == "TxtBoxA" || feSource.Name == "TxtBoxB")
{
foreach(string keyword in Keywords)
{ if(e.Text.Contains(keyword)) {
e.Handled = true;
return;
} } e.Handled = false;
}
}
Answer: D
Microsoft자료 070-511기출문제 070-511 070-511
NO.13 You use Microsoft .NET Framework 4 to create a Windows Presentation Foundation (WPF) application.
You want to add an audio player that plays .wav or .mp3 files when the user clicks a button.
You plan to store the name of the file to a variable named SoundFilePath.
You need to ensure that when a user clicks the button, the file provided by SoundFilePath plays.
What should you do?
A. Write the following code segment in the button onclick event.
System.Media.SoundPlayer player = new System.Media.
SoundPlayer(SoundFilePath); player.play();
B. Write the following code segment in the button onclick event.
MediaPlayer player = new MediaPlayer();
player.Open(new URI(SoundFilePath), UriKind.Relative)); player.play();
C. Use the following code segment from the PlaySound() Win32 API function and call the PlaySound
function in the button onclick event.
[sysimport(dll="winmm.dll")]
public static extern long PlaySound(String SoundFilePath, long hModule, long dwFlags);
D. Reference the Microsoft.DirectX Dynamic Link Libraries. Use the following code segment in the button
onclick event.
Audio song = new Song(SoundFilePath);
song.CurrentPosition = song.Duration; song.Play();
Answer: B
Microsoft 070-511자격증 070-511 070-511
NO.14 You use Microsoft .NET Framework 4 to create a Windows Forms application.
You have a dataset as shown in the following exhibit.
You plan to add a DataGridView to display the dataset.
You need to ensure that the DataGridView meets the following requirements:
- Shows Order Details for the selected order.
- Shows only Order Details for items that have UnitPrice greater than 20.
- Sorts Products by ProductName
Which code segment should you use?
A. ordersBindingSource.DataSource = productsBindingSource;
ordersBindingSource.DataMember = "FK_Order_Details_Products";
productsBindingSource.Filter = "UnitPrice > 20";
productsBindingSource.Sort = "ProductName";
B. productsDataGridView.DataSource = ordersBindingSource;
productsBindingSource.Filter = "UnitPrice > 20";
productsBindingSource.Sort = "ProductName";
C. order_DetailsBindingSource.DataSource = ordersBindingSource;
order_DetailsBindingSource.DataMember = "FK_Order_Details_Orders";
order_DetailsBindingSource.Filter = "UnitPrice > 20";
productsBindingSource.Sort = "ProductName";
D. order_DetailsDataGridView.DataSource = ordersBindingSource;
order_DetailsBindingSource.Filter = "UnitPrice > 20";
productsBindingSource.Sort = "ProductName";
Answer: C
Microsoft 070-511기출문제 070-511 dump 070-511인증 070-511
NO.15 You use Microsoft .NET Framework 4 to create a Windows Presentation Foundation (WPF)
application.
You plan to use an existing Windows Forms control named MyWinFormControl in the MyControls
assembly.
You need to ensure that the control can be used in your application.
What should you do?
A. Add the following code fragment to the application.
<Window x:Class="HostingWfInWpf.Window1"
xmlns="http: //schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http: //schemas.microsoft.com/winfx/2006/xaml"
xmlns:wf="clr-namespace:MyCompany.Controls;assembly=MyControls;" Title="HostingWfInWpf" >
<Grid>
<ElementHost>
<wf:MyWinFormControl x:Name="control" />
</ElementHost>
</Grid> </Window>
B. Add the following code fragment to the application.
<Window x:Class="HostingWfInWpf.Window1"
xmlns="http: //schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http: //schemas.microsoft.com/winfx/2006/xaml"
xmlns:wf="clr-namespace:MyCompany.Controls;assembly=MyControls;" Title="HostingWfInWpf" >
<Grid>
<WindowsFormsHost>
<wf:MyWinFormControl x:Name="control" />
</WindowsFormsHost>
</Grid> </Window>
C. Add the following code segment to the WindowsLoaded function.
ElementHost host = new ElementHost();
host.Dock = DockStyle.Fill;
MyWinFormControl control = new MyWinFormControl();
host.Child = control;
this.Controls.Add(host);
D. Add the following code segment to the WindowsLoaded function.
Grid grid = new Grid();
System.Windows.Forms.Integration.WindowsFormsHost host = new
System.Windows.Forms.Integration.WindowsFormsHost();
MyWinFormControl control = new MyWinFormControl();
grid.Children.Add(host);
Answer: B
Microsoft자료 070-511 070-511 dump 070-511 070-511
ITexamdump의 000-087덤프의 VCE테스트프로그램과 HP2-N40덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 CD0-001시험에 대비한 고품질 덤프와 E20-555시험 최신버전덤프를 제공해드립니다. 최고품질 000-955시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기