IBM 000-027 시험문제

IBM인증000-027시험은 IT인증시험과목중 가장 인기있는 시험입니다. ITExamDump에서는IBM인증000-027시험에 대비한 공부가이드를 발췌하여 IT인사들의 시험공부 고민을 덜어드립니다. ITExamDump에서 발췌한 IBM인증000-027덤프는 실제시험의 모든 범위를 커버하고 있고 모든 시험유형이 포함되어 있어 시험준비 공부의 완벽한 선택입니다.

ITExamDump 에서는 최선을 다해 여러분이IBM 000-027인증시험을 패스하도록 도울 것이며 여러분은 ITExamDump에서IBM 000-027덤프의 일부분의 문제와 답을 무료로 다운받으실 수 잇습니다. ITExamDump 선택함으로IBM 000-027인증시험통과는 물론ITExamDump 제공하는 일년무료 업데이트서비스를 제공받을 수 있으며 ITExamDump의 인증덤프로 시험에서 떨어졌다면 100% 덤프비용 전액환불을 약속 드립니다.

시험 번호/코드: 000-027

시험 이름: IBM (IBM Maximo Asset Management V6.2 Implementation )

ITExamDump는 여러분이IBM 인증000-027인증시험 패스와 추후사업에 모두 도움이 되겠습니다. ITExamDump제품을 선택함으로 여러분은 시간도 절약하고 돈도 절약하는 일석이조의 득을 얻을수 있습니다. 또한 구매후 일년무료 업데이트 버전을 받을수 있는 기회를 얻을수 있습니다. IBM 인증000-027 인증시험패스는 아주 어렵습니다. 자기에 맞는 현명한 학습자료 선택은 성공의 지름길을 내딛는 첫발입니다. 퍼펙트한 자료만이 시험에서 성공할수 있습니다. ITExamDump시험문제와 답이야 말로 퍼펙트한 자료이죠. ITExamDump IBM 인증000-027인증시험자료는 100% 패스보장을 드립니다.

ITExamDump이 바로 아주 좋은IBM 000-027인증시험덤프를 제공할 수 있는 사이트입니다. ITExamDump 의 덤프자료는 IT관련지식이 없는 혹은 적은 분들이 고난의도인IBM 000-027인증시험을 패스할 수 있습니다. 만약ITExamDump에서 제공하는IBM 000-027인증시험덤프를 장바구니에 넣는다면 여러분은 많은 시간과 정신력을 절약하실 수 있습니다. 우리ITExamDump 의IBM 000-027인증시험덤프는 ITExamDump전문적으로IBM 000-027인증시험대비로 만들어진 최고의 자료입니다.

000-027 덤프무료샘플다운로드하기: http://www.itexamdump.com/000-027.html

NO.1 How can Service Items be reordered?
A. The IBM Maximo Asset Management V6.2 (IMAM) administrator can use the Reorder Items action in
the Inventory application to reorder all the Service Items required.
B. The IMAM administrator can create a purchase order (PO) for all the Service Items required and use
the Issue on Receipt check box for PO Lines related to Service Items.
C. The IMAM administrator can use the Reorder Direct Issue Items and Services action in the Service
Item application to reorder all items or services and are issued without being received into
inventory.
D. The IMAM administrator can use the Reorder Direct Issue Items and Services action in the Service
Item application to reorder items or services that are listed on approved work orders and
are issued without being received into inventory.
Answer: D

IBM pdf   000-027   000-027인증   000-027자격증

NO.2 What is the maximum value (as a percentage of total cost) that an item identified as condition-coded
can have?
A. 25%
B. 50%
C. 75%
D. 100%
Answer: D

IBM   000-027기출문제   000-027   000-027자격증   000-027덤프

NO.3 What is the use of work assets on safety plans?
A. The work asset determines to which assets and locations a safety plan can be applied.
B. Only safety plans with associated work assets can be used in combination with job plans.
C. The safety plan can only be applied to work orders with the same asset or location associated.
D. The work assets combined with the work on a job plan dictate which safety information is required.
Answer: D

IBM   000-027 dump   000-027덤프   000-027최신덤프

NO.4 What must be created before populating the Tools application?
A. Item Sets
B. Item Master Owner
C. Vendors for the Items
D. Storeroom assignment
Answer: A

IBM시험문제   000-027자격증   000-027 pdf

NO.5 Can an item balance ever be allowed to be negative?
A. never
B. always
C. depends on which item
D. depends on if it is allowed in the Inventory Default settings
Answer: D

IBM최신덤프   000-027 dumps   000-027   000-027자료

NO.6 What should be done to add lines from a Purchase Request (PR) to a Requests for Quotation (RFQ)?
A. Hyperlink to the PR tab and add each line.
B. Go to the Vendors tab in the RFQ application and click Create PO.
C. Go to the Quotation tab in the RFQ application and select RFQ lines.
D. Select Action in the RFQ application and click Copy PR line item to RFQ.
Answer: D

IBM기출문제   000-027인증   000-027   000-027   000-027

NO.7 Company XYZ receives an invoice from one of its vendors. How is this processed in IBM Maximo
Asset Management V6.2 (IMAM)?
A. When an invoice is received by the company, the user will access the Invoices application, enter the
receipt information, approve, and then route to Accounts Payable.
B. All invoices are routed by IMAM to the Accounts Payable department for matching against existing
purchase requisitions (PR). Once the PR is confirmed with the proper approvals, the
Accounts Payable department will process payment.
C. When an invoice is received by company XYZ, the user will access the Invoices application, enter the
Vendors Invoice information by creating a new record, match the Vendor Invoice to the
Purchase Order (PO), approve, and then route to Accounts Payable.
D. When an invoice is received by the company XYZ, the user will go to the PO application, access the
PO Line tab, and insure that the receipt box has a Y. If the Y is showed, the invoice will be
closed, but if the Y is missing, the invoice will be routed back to the vendor for verification.
Answer: C

IBM dumps   000-027인증   000-027자격증

NO.8 With which level in IBM Maximo Asset Management V6.2 are Purchase Contracts associated?
A. Set Level
B. System Level
C. Database Level
D. Organization Level
Answer: D

IBM인증   000-027   000-027 dumps   000-027   000-027최신덤프

NO.9 What does the ABC designation include for inventory items?
A. Quantity reserved in stock
B. Quantity expired for a particular Lot
C. Count Frequency in number of days
D. Activity Based Costing in capital dollars
Answer: C

IBM   000-027   000-027기출문제   000-027 dumps   000-027

NO.10 The Client has requested that once Terms and Conditions (Ts Cs) are attached to another record, the
Ts Cs should be unchangeable. How is this appropriately accomplished?
A. In the Contracts application, delete the Ts Cs from the record and enter a new row.
B. In the application using the specific Ts Cs, rename the Ts Cs and approve the record.
C. In the Terms and Conditions Application, uncheck the Editable box on the newly created term.
D. In the Terms and Conditions Application, change the status of the newly created term to Approved.
Answer: C

IBM   000-027   000-027시험문제   000-027   000-027   000-027최신덤프

NO.11 At which level do Commodity Codes exist within IBM Maximo Asset Management V6.2?
A. Set level
B. Site level
C. System level
D. Organization level
Answer: A

IBM   000-027   000-027시험문제   000-027   000-027인증

NO.12 In IBM Maximo Asset Management V6.2, what does the Purchase Orders applications Distribute
Costs action do?
A. Distribute the line item cost among all lines.
B. Distribute the line item cost among all direct issue lines.
C. Distribute the line item cost among multiple GL accounts.
D. Distribute the purchase order cost among multiple GL accounts.
Answer: C

IBM기출문제   000-027   000-027   000-027자격증

NO.13 Based on which two conditions can master Preventive Maintenance (PM) schedules be created?
(Choose two.)
A. elapsed time since the target start date or completion date of previous work generated by PM
B. difference between completion date of previous work and system date is equal to Lead Time
C. elapsed time since the target start date or completion date of the latest work orders for the asset
D. metered equipment usage since the target start date or completion date of previous work generated by
PM
E. metered equipment usage since the target start date or completion date of the latest work order for the
asset
Answer: AD

IBM   000-027   000-027

NO.14 What should be done if a company decides to stop doing business with a vendor?
A. Notify buyers using Workflow.
B. Delete the Company Master record.
C. Set the Company record status to DISQUAL.
D. Check the Disqualified Vendor check box on the Company record.
Answer: D

IBM덤프   000-027   000-027자격증

NO.15 Which statement is true about items that have been assembled into a kit?
A. Only rotating items can be part of a kit.
B. Kits can be assembled from lotted items.
C. Kits can be assembled from items in different storerooms.
D. Items that have been assembled into kits do not appear in item balances.
Answer: D

IBM덤프   000-027   000-027   000-027덤프   000-027자료

NO.16 What must be done in order to automatically close the purchase requisition (PR) after one or more
purchase orders (PO) have been created?
A. All PR lines must be assigned to a PO.
B. The PR must be in the Approved status.
C. The PR must enter the workflow process.
D. All manual company input fields must be completed.
Answer: A

IBM자료   000-027   000-027   000-027덤프

NO.17 What must be assigned to establish an asset as Rotating?
A. Spare parts
B. Rotating Item
C. Classification
D. Operating Location
Answer: B

IBM   000-027인증   000-027 dumps   000-027   000-027 pdf   000-027자격증

NO.18 Where are the receipt of Services and Materials processed in IBM Maximo Asset Management V6.2
(IMAM)?
A. The Receipt of Services and Materials are processed in the Receiving application.
B. Services are rendered and Materials are received in the Purchase Order application.
C. Receipts of Services and Materials are systematically processed in IMAM transitionally.
D. Services are rendered and Materials are received using the Issues and Transfer application.
Answer: A

IBM   000-027   000-027   000-027   000-027 dumps

NO.19 In order to use the item records at the site level, to what must the item be added?
A. Asset
B. Location
C. Storeroom
D. Rotating Asset
Answer: C

IBM덤프   000-027최신덤프   000-027   000-027

NO.20 Through which action are Currency Codes created?
A. select New Row in Currency Codes application
B. select Action Currency Codes in the Database Configuration application
C. select an Organization in the Currency Codes application and add a new row
D. select the Base Currency lookup in the Organizations application and add a new row
Answer: A

IBM시험문제   000-027   000-027자격증

NO.21 Which two applications can be used to view actual costs for labor, materials, services, and tools?
(Choose two.)
A. Labor Reporting
B. Quick Reporting
C. Work Order Tracking
D. Assignment Manager
E. Work Order Management
Answer: BC

IBM   000-027   000-027 dumps   000-027   000-027자격증   000-027

NO.22 Which two applications can be used by a user to report emergency work, if the user at least wants to
report downtime, classify the request, and report actuals? (Choose two.)
A. Job Plan
B. Quick Reporting
C. Labor Reporting
D. Work Order Tracking
E. Assignment Manager
Answer: BD

IBM   000-027덤프   000-027

NO.23 Which statement is true about item records and inventory management?
A. With IBM Maximo Asset Management V6.2 (IMAM), item records are created in the Item Master
application, and storeroom records are created in the Storerooms application, but inventory is
managed in the Inventory application.
B. With IMAM, item records are created in the Storerooms application, and storeroom records are created
in the Inventory application, but inventory is managed in the Inventory application.
C. With IMAM, item records are created in the Inventory application, and storeroom records are created in
the Item Master application, and inventory is managed in the Item Master application.
D. With IMAM, item records are created in the Inventory application, and storeroom records are created in
the Storerooms application, but inventory is managed in the Item Master application.
Answer: A

IBM   000-027 pdf   000-027자격증   000-027   000-027

NO.24 The IBM Maximo Asset Management V6.2 administrator creates a new Start Center with updated Key
Performance Indicators. Which application must be used to associate the Start Center to users?
A. Users
B. People
C. Organizations
D. Security Groups
Answer: D

IBM   000-027   000-027   000-027자격증

NO.25 Other than through the Purchase Orders application, how can Purchase Orders be created in IBM
Maximo Asset Management V6.2?
A. from an approved Lease, Rental, Master, or Purchase contract
B. from a Purchase Requisitions Create PO action, create the approved Purchase Order
C. from a Purchase Requisition, a Request for Quotation, a Master Contract, or a reorder process
D. from a Purchase Requisition, a Request for Quotation, a Purchase Contract, or a reorder process
Answer: D

IBM덤프   000-027인증   000-027   000-027시험문제

NO.26 Which menu option must be used to grant a user the authority to add or remove users to one or more
Security Groups?
A. Security Controls
B. Database Access
C. Set Security Profile
D. Authorize Group Reassignment
Answer: D

IBM   000-027자격증   000-027최신덤프   000-027   000-027   000-027 dump

NO.27 What is used to execute a task at a particular time against any application on a user-defined schedule
with user-defined parameters?
A. Sets
B. Workflow
C. Cron Task
D. Notification
Answer: C

IBM   000-027자격증   000-027   000-027덤프

NO.28 In a routing type workflow process, on which nodes does IBM Maximo Asset Management V6.2 use the
information specified to deliver the record to individuals?
A. Condition and Task
B. Manual Input and Task
C. Interaction and Manual Input
D. Manual Input and Subprocess
Answer: B

IBM dumps   000-027인증   000-027 dumps   000-027자격증   000-027

NO.29 Which status will prevent an invoice from being cancelled?
A. Hold
B. Entered
C. Approved
D. Waiting for Approval
Answer: C

IBM   000-027 dump   000-027   000-027

NO.30 A work order has been created to perform corrective maintenance on a defective generator. All
required information has been provided in the work order, but required materials are not in stock and
have to be ordered. What is the status of the work order, after a maintenance manager has approved the
work order?
A. Approved (APPR)
B. Waiting on Materials (WMATL)
C. Waiting to be Scheduled (WSCH)
D. Waiting on Plant Condition (WPCOND)
Answer: B

IBM   000-027   000-027   000-027   000-027자격증

ITExamDump에서 최고최신버전의IBM인증000-027시험덤프 즉 문제와 답을 받으실 수 있습니다. 빨리 소지한다면 좋겠죠. 그래야 여러분은 빨리 한번에IBM인증000-027시험을 패스하실 수 있습니다.IBM인증000-027관련 최고의 자료는 현재까지는ITExamDump덤프가 최고라고 자신 있습니다.