패스를 하지 못하였다면 우리는 무조건 덤프비용 전부를 환불해드릴것입니다.: Juniper

레이블이 Juniper인 게시물을 표시합니다. 모든 게시물 표시

2014년 4월 23일 수요일

도비 Juniper JN0-311 JN0-341 JN0-201 JN0-120 JN0-521 시험

ITExamDump의Juniper JN0-311 JN0-341 JN0-201 JN0-120 JN0-521시험자료의 문제와 답이 실제시험의 문제와 답과 아주 비슷합니다. 우리의 짧은 학습가이드로 빠른 시일 내에 관련지식을 터득하여 응시준비를 하게 합니다. 우리는 우리의Juniper JN0-311 JN0-341 JN0-201 JN0-120 JN0-521인증시험덤프로 시험패스를 보장합니다.

ITExamDump의Juniper인증 JN0-311 JN0-341 JN0-201 JN0-120 JN0-521덤프를 공부하시면 한방에 시험을 패스하는건 문제가 아닙니다. ITExamDump의Juniper인증 JN0-311 JN0-341 JN0-201 JN0-120 JN0-521덤프는 시험적중율 최고의 인지도를 넓히 알리고 있습니다.저희가 제공한 시험예상문제로 시험에 도전해보지 않으실래요? Juniper인증 JN0-311 JN0-341 JN0-201 JN0-120 JN0-521덤프를 선택하시면 성공의 지름길이 눈앞에 다가옵니다.

시험 번호/코드: JN0-311
시험 이름: Juniper (WX, Associate(JNCIA-WX))
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 123 문항
업데이트: 2014-04-22

시험 번호/코드: JN0-341
시험 이름: Juniper (ER.Associate(JNCIA-ER))
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 180 문항
업데이트: 2014-04-22

시험 번호/코드: JN0-201
시험 이름: Juniper (Juniper networks Certified internet associate.m(jncia-m))
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 120 문항
업데이트: 2014-04-22

시험 번호/코드: JN0-120
시험 이름: Juniper (Juniper networks Certified internet associate.e(jncia-e))
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 120 문항
업데이트: 2014-04-22

시험 번호/코드: JN0-521
시험 이름: Juniper (FWV.Associate (JNCIA-FWV))
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 119 문항
업데이트: 2014-04-22

자신을 부단히 업그레이드하려면 많은 노력이 필요합니다. IT업종 종사자라면 국제승인 IT인증자격증을 취득하는것이 자신을 업그레이드하는것과 같습니다. Juniper인증 JN0-311 JN0-341 JN0-201 JN0-120 JN0-521시험을 패스하여 원하는 자격증을 취득하려면ITExamDump의Juniper인증 JN0-311 JN0-341 JN0-201 JN0-120 JN0-521덤프를 추천해드립니다. 하루빨리 덤프를 공부하여 자격증 부자가 되세요.

ITExamDump 는 전문적으로 it전문인사들에게 도움을 드리는 사이트입니다.많은 분들의 반응과 리뷰를 보면 우리ITExamDump의 제품이 제일 안전하고 최신이라고 합니다. ITExamDump의 학습가이드는 아주 믿음이 가는 문제집들만 있으니까요. ITExamDump 덤프의 문제와 답은 모두 제일 정확합니다. 왜냐면 우리의 전문가들은 매일 최신버전을 갱신하고 있기 때문입니다.

JN0-521 덤프무료샘플다운로드하기: http://www.itexamdump.com/JN0-521.html

NO.1 By default, from which hardware component is the startup copy of the ScreenOS loaded?
A.NVRAM
B.TFTP server
C.internal flash
D.PCMCIA card
Answer: C

Juniper자료   JN0-521   JN0-521   JN0-521최신덤프   JN0-521

NO.2 A ScreenOS firewall is running in transparent mode. The firewall receives a packet which has no entry
in its forwarding table.
What will the firewall do?
A.Flood out all ports.
B.Check its route table for interzone destination.
C.Perform a policy lookup to determine the interfaces to which the source address is permitted, and flood
the packet out of those interfaces.
D.Perform a policy lookup to determine the zones to which the source address is permitted, and flood the
packet out the interfaces bound to those zones.
Answer: D

Juniper   JN0-521인증   JN0-521 dumps   JN0-521   JN0-521

NO.3 An operational firewall needs a configuration loaded and executed while it is passing user data.
Which CLI command will perform this process without interrupting traffic?
A.save config from tftp 1.1.7.250 15June06.cfg to flash
B.save config from tftp 1.1.7.250 15June06.cfg to ram
C.save config from tftp 1.1.7.250 15June06.cfg merge
D.save config from tftp 1.1.7.250 15June06.cfg to flash
Answer: C

Juniper dump   JN0-521   JN0-521   JN0-521인증

NO.4 When performing an image upgrade using the CLI, which three locations would be a source for this
image? (Choose three.)
A.FTP server
B.TFTP server
C.internal flash
D.PC local disk
E.Compact Flash Card
Answer: BCE

Juniper   JN0-521   JN0-521

NO.5 Click the Exhibit button.
In the exhibit, which two forms of address translation would have generated the output shown? (Choose
two.)
A.MIP
B.NAT-src with no DIP
C.Interface-based translation
D.NAT-src with a DIP, fixed-port disabled
Answer: BC

Juniper덤프   JN0-521시험문제   JN0-521최신덤프   JN0-521최신덤프

NO.6 Which process describes how an addressed physical interface is moved into a Layer 2 zone?
A.Place the required interface into the VLAN zone.
B.Place the required interface into L2 zones such as V1-Trust, V1-Untrust
C.Remove the interface from the L3 zone such as Trust and place it into a L2 zone such as V1-Trust
D.Remove the address from the interface, remove the interface from the L3 zone, and then place
interface in the L2 zone.
Answer: D

Juniper기출문제   JN0-521   JN0-521기출문제   JN0-521자격증

NO.7 Which statement is correct regarding administrator privileges?
A.Any administrator can change their privileges on an as-needed basis.
B.Administrator privileges can only be established and changed by the root administrator.
C.Administrator privileges can be established and changed by the root and all-privilege administrator.
D.Administrator privileges can only be established by the root and can be changed by the root and
all-privilege administrator.
Answer: B

Juniper   JN0-521   JN0-521   JN0-521 dump

NO.8 Which ScreenOS WebUI button reorders policies?
A.Shift
B.Move
C.Reorder
D.Transfer
Answer: B

Juniper   JN0-521   JN0-521   JN0-521 dumps   JN0-521

NO.9 What are two benefits of configuring a ScreenOS device in transparent mode? (Choose two.)
A.There is no need to reconfigure the IP addresses of routers or protected servers.
B.There is no need to create MIPs or VIPs for incoming traffic to reach protected servers.
C.Policies are easier to create since you do not have to include source and destination IP addresses.
D.The product can support more VPNs and obtain greater throughput because there is less overhead to
manage.
Answer: AB

Juniper   JN0-521자료   JN0-521자격증   JN0-521   JN0-521 dump   JN0-521최신덤프

NO.10 In the command, save config from tftp 1.1.7.250 abcd.cfg merge, which function does the merge
parameter specify?
A.The config file from the TFTP server will replace the configuration in RAM.
B.The config file from the TFTP server will replace the startup configuration file in internal flash.
C.The merge parameter is not valid for TFTP files, it is only valid for configuration files stored in internal
flash.
D.The config file from the TFTP server will be combined with the configuration file in RAM and the
combined result will be saved in internal flash.
Answer: D

Juniper dump   JN0-521자료   JN0-521 pdf   JN0-521

NO.11 You are looking at the event log of the responding device and it says,
"Rejected an initial Phase 1 packet from an unrecognized peer gateway"
What are three likely reasons for the failure? (Choose three.)
A.The peer ID is misconfigured.
B.The default gateway is missing.
C.The preshare keys are mismatched.
D.The gateway address is misconfigured.
E.The outgoing interface is misconfigured.
Answer: ADE

Juniper   JN0-521   JN0-521덤프   JN0-521   JN0-521

NO.12 What is the purpose of the "Permitted IP" address on a ScreenOS device?
A.It defines a list of addresses that are trusted to perform management on the ScreenOS device.
B.It is used in policy rules to determine which user traffic is allowed through the ScreenOS device.
C.It defines which range of addresses that can access devices connected to the ScreenOS device.
D.It is the address that an external device uses to gain management access to a ScreenOS device.
Answer: A

Juniper   JN0-521자격증   JN0-521   JN0-521   JN0-521기출문제   JN0-521

NO.13 In the packet forwarding decision process, how is the second packet handled differently than the first
in a series of allowed interzone packets?
A.The second packet causes an ARP query.
B.The second packet is checked against the policy table.
C.The second packet is forwarded without a sanity check.
D.The second packet is forwarded without checking the route table.
Answer: D

Juniper   JN0-521자료   JN0-521   JN0-521

NO.14 Click the Exhibit button.
In the exhibit, which interface would be used to forward traffic to host 1.1.7.5?
A.e0/1
B.e0/2
C.e0/3
D.e0/4
Answer: C

Juniper자격증   JN0-521   JN0-521   JN0-521 dump   JN0-521   JN0-521

NO.15 Which type of NAT is performed when you implement interface-based NAT?
A.source IP address translation
B.destination IP address translation
C.source IP and port address translation
D.destination IP and port address translation
Answer: C

Juniper기출문제   JN0-521   JN0-521   JN0-521자료   JN0-521 dumps

NO.16 What will change the root admin password?
A.set admin password
B.set root-admin password
C.set admin password
D.set admin user password
Answer: A

Juniper시험문제   JN0-521자격증   JN0-521   JN0-521최신덤프

NO.17 Which statement accurately describes the "config rollback" feature?
A.Once the "config rollback" feature is enabled, it allows the administrator to re-apply a previously saved
configuration file from flash.
B.The "config rollback" feature is enabled by default, it allows the administrator to re-apply a previously
saved configuration file from flash.
C.Once the "config rollback" feature is enabled, it allows the administrator to re-apply a locked
configuration file from a separate area in flash.
D.Once the "config rollback" feature is enabled, it allows the administrator to revert to the prior ScreenOS
image or configuration file in the event an upgrade operation aborts.
Answer: C

Juniper   JN0-521   JN0-521   JN0-521자격증   JN0-521

NO.18 When changes are made to the running config during a WebUI management session, to what external
hardware component can the changes be saved?
A.FTP server
B.TFTP server
C.PC local disk
D.Compact Flash Card
Answer: C

Juniper자격증   JN0-521인증   JN0-521   JN0-521덤프

NO.19 Which command is used when configuring web management on the VLAN1 interface for a client
connected to an e3 interface in the DMZ zone?
A.set int eth3 manage web
B.set zone v1-dmz manage web
C.set int dmz zone manage web
D.set int VLAN1 zone dmz manage web
Answer: B

Juniper   JN0-521덤프   JN0-521최신덤프

NO.20 Which two statements are true in regards to a ScreenOS firewall in transparent mode? (Choose two.)
A.VPNs can terminate to the VLAN1 interface IP address.
B.Static routes must be configured if multiple virtual routers are going to be used.
C.It can be installed in a network without the requirement to reconfigure IP addressing schemes.
D.You must use the console port to manage the device as you cannot manage the device using an
Ethernet port.
Answer: AC

Juniper   JN0-521   JN0-521   JN0-521최신덤프

NO.21 Which command would you run to check IPSec Phase 1 active status?
A.get sa
B.get event 427
C.get sa active
D.get ike cookie
Answer: D

Juniper   JN0-521   JN0-521최신덤프   JN0-521덤프   JN0-521   JN0-521자격증

NO.22 When managing a ScreenOS device using the WebUI and performing an image upgrade, from which
hardware component will the ScreenOS image be loaded?
A.TFTP server
B.PC local disk
C.internal flash
D.Compact Flash Card
Answer: B

Juniper   JN0-521   JN0-521자료   JN0-521인증   JN0-521

NO.23 By default, where are changes stored when a save command is issued from the CLI during a
management session?
A.NVRAM
B.internal flash
C.PCMCIA card
D.Compact Flash Card
Answer: B

Juniper   JN0-521   JN0-521 dumps   JN0-521 dump

NO.24 What is the purpose of the VLAN1 interface?
A.It provides policy-based NAT for 802.1Q VLANs.
B.It provides an interface that can be used with 802.1Q VLANs in transparent mode.
C.It provides the ScreenOS device with a routable IP address while operating in route mode.
D.It provides an interface that can be used to remotely manage the ScreenOS device while operating in
transparent mode.
Answer: D

Juniper dumps   JN0-521 dumps   JN0-521   JN0-521 pdf

NO.25 What is the purpose of the "Manage-IP" address on a ScreenOS device?
A.It defines a list of addresses that are trusted to perform management on the ScreenOS device.
B.It is used in policy rules to determine which device is allowed to manage the ScreenOS device.
C.It is the address that an external device uses to gain management access to a ScreenOS device.
D.It defines a list of device addresses that can manage the ScreenOS device without being authenticated
prior to session establishment.
Answer: C

Juniper시험문제   JN0-521자료   JN0-521시험문제

NO.26 You are configuring an interface in the untrust zone with an IP address, telnet enabled, and WebUI
management.
Which sequence of steps must be performed to make the interface operational at the end of the
configuration sequence?
A.Assign the interface to a zone, define the IP address, enable Web and telnet services.
B.Assign the interface to a zone, define the IP address, accept default management services.
C.Assign the interface to a virtual router, define the IP address, enable Web and telnet services.
D.Assign the interface to a zone, define the IP address, define a manage IP address, accept default
management services.
Answer: A

Juniper자료   JN0-521   JN0-521인증   JN0-521 pdf   JN0-521시험문제   JN0-521 dumps

NO.27 When a firewall receives the first packet in a series, what will it immediately do?
A.Check its route table.
B.Check its session table.
C.Determine if traffic is crossing zones.
D.Verify that it is not malformed or a fragment.
Answer: D

Juniper   JN0-521최신덤프   JN0-521인증   JN0-521시험문제   JN0-521

NO.28 A ScreenOS firewall has the correct interfaces addressed and active. A policy is written allowing
interzone FTP traffic from a directly connected client. But the traffic does not cross the firewall from the
client to the server.
What is the most likely problem with the firewall?
A.The ScreenOS firewall has no physical connection to the FTP server.
B.The ALG option on the ScreenOS firewall has not been enabled for FTP traffic.
C.The ScreenOS firewall does not have a route defined to the FTP servers' subnet.
D.The ScreenOS firewall does not have a route defined to the FTP clients subnet.
Answer: C

Juniper   JN0-521   JN0-521

NO.29 When configuring a firewall in a critical environment where a local backup configuration is quickly
needed, what should be completed on a periodic basis?
A.Execute exec config rollback.
B.Execute save config to last-known-good.
C.Execute save regularly or create a script that does this.
D.Execute save software from flash to pcmcia .
Answer: B

Juniper   JN0-521   JN0-521덤프   JN0-521

NO.30 Telnet management has been enabled on an interface in the untrust zone.
What else should be completed to limit telnet access to the ScreenOS device from trusted management
PCs?
A.Define a permitted IP address.
B.Define a policy from trust to untrust.
C.Define a trusted IP in the address table.
D.Define a manage IP address on this interface.
Answer: A

Juniper인증   JN0-521   JN0-521덤프   JN0-521   JN0-521   JN0-521

JN0-533 JN0-633 JN0-380 JN0-370 JN0-355 덤프 Juniper 자격증

Juniper JN0-533 JN0-633 JN0-380 JN0-370 JN0-355인증시험은 현재IT인사들 중 아주 인기 잇는 인증시험입니다.Juniper JN0-533 JN0-633 JN0-380 JN0-370 JN0-355시험패스는 여러분의 하시는 일과 생활에서 많은 도움을 줄뿐만 아니라 중요한 건 여러분의IT업계에서의 자기만의 자리를 지키실 수 잇습니다.이렇게 좋은 시험이니 많은 분들이 응시하려고 합니다,하지만 패스 율은 아주 낮습니다.

우리ITExamDump에서는 각종IT시험에 관심있는분들을 위하여, 여러 가지 인증시험자료를 제공하는 사이트입니다. 우리ITExamDump는 많은 분들이 IT인증시험을 응시하여 성공할수록 도와주는 사이트입니다. 우리의 파워는 아주 대단하답니다. 여러분은 우리ITExamDump 사이트에서 제공하는Juniper JN0-533 JN0-633 JN0-380 JN0-370 JN0-355관련자료의 일부분문제와답등 샘플을 무료로 다운받아 체험해봄으로 우리에 믿음이 생기게 될 것입니다.

여러분은Juniper JN0-533 JN0-633 JN0-380 JN0-370 JN0-355인증시험을 패스함으로 IT업계관련 직업을 찿고자하는 분들에게는 아주 큰 가산점이 될수 있으며, 성덩한 IT업계사업자와 한걸음 가까와 집니다.

여러분이 다른 사이트에서도Juniper인증JN0-533 JN0-633 JN0-380 JN0-370 JN0-355시험 관련덤프자료를 보셨을 것입니다 하지만 우리ITExamDump의 자료만의 최고의 전문가들이 만들어낸 제일 전면적이고 또 최신 업데이트일 것입니다.우리덤프의 문제와 답으로 여러분은 꼭 한번에Juniper인증JN0-533 JN0-633 JN0-380 JN0-370 JN0-355시험을 패스하실 수 있습니다.

시험 번호/코드: JN0-533
시험 이름: Juniper (FWV, Specialist (JNCIS-FWV))
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 110 문항
업데이트: 2014-04-22

시험 번호/코드: JN0-633
시험 이름: Juniper (Security, Professional (JNCIP-SEC) Exam)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 110 문항
업데이트: 2014-04-22

시험 번호/코드: JN0-380
시험 이름: Juniper (Wireless LAN, Specialist (JNCIS-WLAN))
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 86 문항
업데이트: 2014-04-22

시험 번호/코드: JN0-370
시험 이름: Juniper (QFabric, Specialist (JNCIS-QF))
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 108 문항
업데이트: 2014-04-22

시험 번호/코드: JN0-355
시험 이름: Juniper (Junos Pulse Secure Access, Specialist (JNCIS-SA))
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 115 문항
업데이트: 2014-04-22

2014년 3월 18일 화요일

Juniper 자격증 JN0-521 시험문제와 답

JN0-521인증시험은Juniper인증시험중의 하나입니다.그리고 또한 비중이 아주 큰 인증시험입니다. 그리고Juniper JN0-521인증시험 패스는 진짜 어렵다고 합니다. 우리ITExamDump에서는 여러분이JN0-521인증시험을 편리하게 응시하도록 전문적이 연구팀에서 만들어낸 최고의JN0-521덤프를 제공합니다, ITExamDump와 만남으로 여러분은 아주 간편하게 어려운 시험을 패스하실 수 있습니다,

Juniper인증JN0-521시험은 국제적으로 승인해주는 IT인증시험의 한과목입니다. 근 몇년간 IT인사들에게 최고의 인기를 누리고 있는 과목으로서 그 난이도 또한 높습니다. 자격증을 취득하여 직장에서 혹은 IT업계에서 자시만의 위치를 찾으련다면 자격증 취득이 필수입니다. Juniper인증JN0-521시험을 패스하고 싶은 분들은ITExamDump제품으로 가보세요.

IT업계 취업 준비생이라면 국제적으로도 승인받는 IT인증자격증 정도는 몇개 취득해야 하지 않을가 싶습니다. Juniper인증 JN0-521시험을 통과하여 인기 자격증을 취득하시면 취업경쟁율이 제고되어 취업이 쉬워집니다. ITExamDump의Juniper인증 JN0-521덤프는 많은 시험본 분들에 의해 검증된 최신 최고의 덤프공부자료입니다.망설이지 마시고ITExamDump제품으로 한번 가보세요.

Juniper인증 JN0-521시험은 IT인증시험중 가장 인기있는 시험입니다. Juniper인증 JN0-521시험패스는 모든 IT인사들의 로망입니다. ITExamDump의 완벽한 Juniper인증 JN0-521덤프로 시험준비하여 고득점으로 자격증을 따보세요.

시험 번호/코드: JN0-521
시험 이름: Juniper (FWV.Associate (JNCIA-FWV))
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 119 문항
업데이트: 2014-03-17

Juniper인증 JN0-521시험에 도전하고 싶으시다면 최강 시험패스율로 유명한ITExamDump의 Juniper인증 JN0-521덤프로 시험공부를 해보세요. 시간절약은 물론이고 가격도 착해서 간단한 시험패스에 딱 좋은 선택입니다. Juniper 인증JN0-521시험출제경향을 퍼펙트하게 연구하여ITExamDump에서는Juniper 인증JN0-521시험대비덤프를 출시하였습니다. ITExamDump제품은 고객님의 IT자격증 취득의 앞길을 훤히 비추어드립니다.

JN0-521 덤프무료샘플다운로드하기: http://www.itexamdump.com/JN0-521.html

NO.1 Which command would you run to check IPSec Phase 1 active status?
A.get sa
B.get event 427
C.get sa active
D.get ike cookie
Answer: D

Juniper   JN0-521   JN0-521   JN0-521 dump

NO.2 By default, where are changes stored when a save command is issued from the CLI during a
management session?
A.NVRAM
B.internal flash
C.PCMCIA card
D.Compact Flash Card
Answer: B

Juniper   JN0-521 dumps   JN0-521 pdf   JN0-521인증   JN0-521자료

NO.3 When changes are made to the running config during a WebUI management session, to what external
hardware component can the changes be saved?
A.FTP server
B.TFTP server
C.PC local disk
D.Compact Flash Card
Answer: C

Juniper dumps   JN0-521 dumps   JN0-521   JN0-521 dumps

NO.4 In the packet forwarding decision process, how is the second packet handled differently than the first
in a series of allowed interzone packets?
A.The second packet causes an ARP query.
B.The second packet is checked against the policy table.
C.The second packet is forwarded without a sanity check.
D.The second packet is forwarded without checking the route table.
Answer: D

Juniper pdf   JN0-521   JN0-521   JN0-521 dump

NO.5 What is the purpose of the VLAN1 interface?
A.It provides policy-based NAT for 802.1Q VLANs.
B.It provides an interface that can be used with 802.1Q VLANs in transparent mode.
C.It provides the ScreenOS device with a routable IP address while operating in route mode.
D.It provides an interface that can be used to remotely manage the ScreenOS device while operating in
transparent mode.
Answer: D

Juniper pdf   JN0-521   JN0-521   JN0-521인증   JN0-521 pdf

NO.6 When managing a ScreenOS device using the WebUI and performing an image upgrade, from which
hardware component will the ScreenOS image be loaded?
A.TFTP server
B.PC local disk
C.internal flash
D.Compact Flash Card
Answer: B

Juniper   JN0-521 dumps   JN0-521   JN0-521인증

NO.7 Click the Exhibit button.
In the exhibit, which two forms of address translation would have generated the output shown? (Choose
two.)
A.MIP
B.NAT-src with no DIP
C.Interface-based translation
D.NAT-src with a DIP, fixed-port disabled
Answer: BC

Juniper   JN0-521기출문제   JN0-521   JN0-521인증   JN0-521

NO.8 Telnet management has been enabled on an interface in the untrust zone.
What else should be completed to limit telnet access to the ScreenOS device from trusted management
PCs?
A.Define a permitted IP address.
B.Define a policy from trust to untrust.
C.Define a trusted IP in the address table.
D.Define a manage IP address on this interface.
Answer: A

Juniper   JN0-521 dumps   JN0-521   JN0-521   JN0-521

NO.9 What is the purpose of the "Permitted IP" address on a ScreenOS device?
A.It defines a list of addresses that are trusted to perform management on the ScreenOS device.
B.It is used in policy rules to determine which user traffic is allowed through the ScreenOS device.
C.It defines which range of addresses that can access devices connected to the ScreenOS device.
D.It is the address that an external device uses to gain management access to a ScreenOS device.
Answer: A

Juniper   JN0-521덤프   JN0-521   JN0-521 dump   JN0-521

NO.10 What are two benefits of configuring a ScreenOS device in transparent mode? (Choose two.)
A.There is no need to reconfigure the IP addresses of routers or protected servers.
B.There is no need to create MIPs or VIPs for incoming traffic to reach protected servers.
C.Policies are easier to create since you do not have to include source and destination IP addresses.
D.The product can support more VPNs and obtain greater throughput because there is less overhead to
manage.
Answer: AB

Juniper시험문제   JN0-521자료   JN0-521시험문제   JN0-521   JN0-521기출문제

NO.11 In the command, save config from tftp 1.1.7.250 abcd.cfg merge, which function does the merge
parameter specify?
A.The config file from the TFTP server will replace the configuration in RAM.
B.The config file from the TFTP server will replace the startup configuration file in internal flash.
C.The merge parameter is not valid for TFTP files, it is only valid for configuration files stored in internal
flash.
D.The config file from the TFTP server will be combined with the configuration file in RAM and the
combined result will be saved in internal flash.
Answer: D

Juniper   JN0-521   JN0-521인증   JN0-521기출문제   JN0-521

NO.12 An operational firewall needs a configuration loaded and executed while it is passing user data.
Which CLI command will perform this process without interrupting traffic?
A.save config from tftp 1.1.7.250 15June06.cfg to flash
B.save config from tftp 1.1.7.250 15June06.cfg to ram
C.save config from tftp 1.1.7.250 15June06.cfg merge
D.save config from tftp 1.1.7.250 15June06.cfg to flash
Answer: C

Juniper덤프   JN0-521   JN0-521

NO.13 Which two statements are true in regards to a ScreenOS firewall in transparent mode? (Choose two.)
A.VPNs can terminate to the VLAN1 interface IP address.
B.Static routes must be configured if multiple virtual routers are going to be used.
C.It can be installed in a network without the requirement to reconfigure IP addressing schemes.
D.You must use the console port to manage the device as you cannot manage the device using an
Ethernet port.
Answer: AC

Juniper   JN0-521 pdf   JN0-521 dumps   JN0-521최신덤프

NO.14 Which process describes how an addressed physical interface is moved into a Layer 2 zone?
A.Place the required interface into the VLAN zone.
B.Place the required interface into L2 zones such as V1-Trust, V1-Untrust
C.Remove the interface from the L3 zone such as Trust and place it into a L2 zone such as V1-Trust
D.Remove the address from the interface, remove the interface from the L3 zone, and then place
interface in the L2 zone.
Answer: D

Juniper   JN0-521   JN0-521자격증   JN0-521기출문제

NO.15 Which statement accurately describes the "config rollback" feature?
A.Once the "config rollback" feature is enabled, it allows the administrator to re-apply a previously saved
configuration file from flash.
B.The "config rollback" feature is enabled by default, it allows the administrator to re-apply a previously
saved configuration file from flash.
C.Once the "config rollback" feature is enabled, it allows the administrator to re-apply a locked
configuration file from a separate area in flash.
D.Once the "config rollback" feature is enabled, it allows the administrator to revert to the prior ScreenOS
image or configuration file in the event an upgrade operation aborts.
Answer: C

Juniper   JN0-521 pdf   JN0-521 dumps

NO.16 What is the purpose of the "Manage-IP" address on a ScreenOS device?
A.It defines a list of addresses that are trusted to perform management on the ScreenOS device.
B.It is used in policy rules to determine which device is allowed to manage the ScreenOS device.
C.It is the address that an external device uses to gain management access to a ScreenOS device.
D.It defines a list of device addresses that can manage the ScreenOS device without being authenticated
prior to session establishment.
Answer: C

Juniper   JN0-521인증   JN0-521덤프   JN0-521

NO.17 You are configuring an interface in the untrust zone with an IP address, telnet enabled, and WebUI
management.
Which sequence of steps must be performed to make the interface operational at the end of the
configuration sequence?
A.Assign the interface to a zone, define the IP address, enable Web and telnet services.
B.Assign the interface to a zone, define the IP address, accept default management services.
C.Assign the interface to a virtual router, define the IP address, enable Web and telnet services.
D.Assign the interface to a zone, define the IP address, define a manage IP address, accept default
management services.
Answer: A

Juniper최신덤프   JN0-521 dump   JN0-521 pdf   JN0-521 dumps   JN0-521

NO.18 When performing an image upgrade using the CLI, which three locations would be a source for this
image? (Choose three.)
A.FTP server
B.TFTP server
C.internal flash
D.PC local disk
E.Compact Flash Card
Answer: BCE

Juniper   JN0-521자료   JN0-521 pdf   JN0-521   JN0-521   JN0-521인증

NO.19 Which ScreenOS WebUI button reorders policies?
A.Shift
B.Move
C.Reorder
D.Transfer
Answer: B

Juniper   JN0-521   JN0-521   JN0-521최신덤프   JN0-521 dump

NO.20 By default, from which hardware component is the startup copy of the ScreenOS loaded?
A.NVRAM
B.TFTP server
C.internal flash
D.PCMCIA card
Answer: C

Juniper   JN0-521자료   JN0-521   JN0-521   JN0-521시험문제

NO.21 What will change the root admin password?
A.set admin password
B.set root-admin password
C.set admin password
D.set admin user password
Answer: A

Juniper자격증   JN0-521자격증   JN0-521자격증   JN0-521

NO.22 A ScreenOS firewall is running in transparent mode. The firewall receives a packet which has no entry
in its forwarding table.
What will the firewall do?
A.Flood out all ports.
B.Check its route table for interzone destination.
C.Perform a policy lookup to determine the interfaces to which the source address is permitted, and flood
the packet out of those interfaces.
D.Perform a policy lookup to determine the zones to which the source address is permitted, and flood the
packet out the interfaces bound to those zones.
Answer: D

Juniper dumps   JN0-521   JN0-521   JN0-521최신덤프

NO.23 Which command is used when configuring web management on the VLAN1 interface for a client
connected to an e3 interface in the DMZ zone?
A.set int eth3 manage web
B.set zone v1-dmz manage web
C.set int dmz zone manage web
D.set int VLAN1 zone dmz manage web
Answer: B

Juniper인증   JN0-521   JN0-521 pdf   JN0-521   JN0-521자격증   JN0-521

NO.24 Click the Exhibit button.
In the exhibit, which interface would be used to forward traffic to host 1.1.7.5?
A.e0/1
B.e0/2
C.e0/3
D.e0/4
Answer: C

Juniper   JN0-521   JN0-521 dump   JN0-521   JN0-521자료

NO.25 When configuring a firewall in a critical environment where a local backup configuration is quickly
needed, what should be completed on a periodic basis?
A.Execute exec config rollback.
B.Execute save config to last-known-good.
C.Execute save regularly or create a script that does this.
D.Execute save software from flash to pcmcia .
Answer: B

Juniper   JN0-521덤프   JN0-521   JN0-521자료   JN0-521 dump   JN0-521 dump

NO.26 Which statement is correct regarding administrator privileges?
A.Any administrator can change their privileges on an as-needed basis.
B.Administrator privileges can only be established and changed by the root administrator.
C.Administrator privileges can be established and changed by the root and all-privilege administrator.
D.Administrator privileges can only be established by the root and can be changed by the root and
all-privilege administrator.
Answer: B

Juniper   JN0-521 dump   JN0-521최신덤프   JN0-521

NO.27 A ScreenOS firewall has the correct interfaces addressed and active. A policy is written allowing
interzone FTP traffic from a directly connected client. But the traffic does not cross the firewall from the
client to the server.
What is the most likely problem with the firewall?
A.The ScreenOS firewall has no physical connection to the FTP server.
B.The ALG option on the ScreenOS firewall has not been enabled for FTP traffic.
C.The ScreenOS firewall does not have a route defined to the FTP servers' subnet.
D.The ScreenOS firewall does not have a route defined to the FTP clients subnet.
Answer: C

Juniper기출문제   JN0-521   JN0-521최신덤프   JN0-521   JN0-521 pdf

NO.28 You are looking at the event log of the responding device and it says,
"Rejected an initial Phase 1 packet from an unrecognized peer gateway"
What are three likely reasons for the failure? (Choose three.)
A.The peer ID is misconfigured.
B.The default gateway is missing.
C.The preshare keys are mismatched.
D.The gateway address is misconfigured.
E.The outgoing interface is misconfigured.
Answer: ADE

Juniper pdf   JN0-521덤프   JN0-521   JN0-521 dumps

NO.29 Which type of NAT is performed when you implement interface-based NAT?
A.source IP address translation
B.destination IP address translation
C.source IP and port address translation
D.destination IP and port address translation
Answer: C

Juniper   JN0-521덤프   JN0-521덤프   JN0-521 dump   JN0-521

NO.30 When a firewall receives the first packet in a series, what will it immediately do?
A.Check its route table.
B.Check its session table.
C.Determine if traffic is crossing zones.
D.Verify that it is not malformed or a fragment.
Answer: D

Juniper   JN0-521자료   JN0-521

ITexamdump의 M70-301덤프의 VCE테스트프로그램과 700-104덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 C_TBIT44_73시험에 대비한 고품질 덤프와 000-303시험 최신버전덤프를 제공해드립니다. 최고품질 70-341시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/JN0-521.html

Juniper JN0-311 인증 덤프

Juniper인증 JN0-311시험이 너무 어려워 보여서 오르지못할 산처럼 보이시나요? 그건ITExamDump의 Juniper인증 JN0-311시험문제에 대비하여 제작한Juniper인증 JN0-311덤프가 있다는 것을 모르고 있기때문입니다. Juniper인증 JN0-311시험에 도전하고 싶으시다면 최강 시험패스율로 유명한ITExamDump의 Juniper인증 JN0-311덤프로 시험공부를 해보세요.시간절약은 물론이고 가격도 착해서 간단한 시험패스에 딱 좋은 선택입니다.

ITExamDump의 Juniper인증 JN0-311덤프는 거의 모든 실제시험문제 범위를 커버하고 있습니다.Juniper인증 JN0-311시험덤프를 구매하여 덤프문제로 시험에서 불합격성적표를 받을시ITExamDump에서는 덤프비용 전액 환불을 약속드립니다.

Juniper JN0-311인증시험을 패스하고 자격증 취득으로 하여 여러분의 인생은 많은 인생역전이 이루어질 것입니다. 회사, 생활에서는 물론 많은 업그레이드가 있을 것입니다. 하지만JN0-311시험은Juniper인증의 아주 중요한 시험으로서JN0-311시험패스는 쉬운 것도 아닙니다.

시험 번호/코드: JN0-311
시험 이름: Juniper (WX, Associate(JNCIA-WX))
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 123 문항
업데이트: 2014-03-17

ITExamDump 에서 출시한 제품 Juniper인증JN0-311시험덤프는 고득점으로 시험을 통과한 많은 분들이 검증한 완벽한 시험공부자료입니다. IT업계에 몇십년간 종사한 전문가들의 경험과 노하우로 제작된Juniper인증JN0-311덤프는 실제 시험문제에 대비하여 시험유형과 똑같은 유형의 문제가 포함되어있습니다.시험 불합격시 불합격성적표로 덤프비용환불신청을 약속드리기에 아무런 우려없이 덤프를 구매하여 공부하시면 됩니다.

ITExamDump는 유일하게 여러분이 원하는Juniper인증JN0-311시험관련자료를 해결해드릴 수 잇는 사이트입니다. 여러분이 다른 사이트에서도 관련덤프자료를 보셨을경우 페이지 아래를 보면 자료출처는 당연히 ITExamDump 일 것입니다. ITExamDump의 자료만의 제일 전면적이고 또 최신 업데이트일 것입니다.

IT인증시험문제는 수시로 변경됩니다. 이 점을 해결하기 위해ITExamDump의Juniper인증 JN0-311덤프도 시험변경에 따라 업데이트하도록 최선을 다하고 있습니다.시험문제 변경에 초점을 맞추어 업데이트를 진행한후 업데이트된Juniper인증 JN0-311덤프를 1년간 무료로 업데이트서비스를 드립니다.

JN0-311 덤프무료샘플다운로드하기: http://www.itexamdump.com/JN0-311.html

NO.1 What is NSC's functionality?
A. Web caching
B. sequence caching
C. memory-based compression
D. next-generation compression
Answer: B

Juniper자료   JN0-311덤프   JN0-311   JN0-311 dump

NO.2 Which two secure remote access methods are available on the WX platforms? (Choose two.)
A. SSL
B. SSH
C. Telnet
D. HTTP
Answer:AB

Juniper   JN0-311   JN0-311인증   JN0-311   JN0-311

NO.3 Which three locations in WebView allow you to confirm that the endpoints are configured properly?
(Choose three.)
A. Monitor > Endpoints
B. Acceleration > Endpoints
C. Device Setup > Endpoints
D. Compression > Endpoints
E. Admin > Maintenance > Display Configuration
Answer:ADE

Juniper   JN0-311덤프   JN0-311 dump   JN0-311   JN0-311   JN0-311

NO.4 Which three statistics does the Executive report summarize? (Choose three.)
A. latency and loss
B. compression results
C. traffic (by application)
D. CRC and alignment errors
E. user access (by username)
Answer: ABC

Juniper최신덤프   JN0-311   JN0-311   JN0-311

NO.5 Which statement is true about compression subnets?
A. Compression subnets are turned on by default.
B. Compression subnets advertise remote routes.
C. Compression subnets are usually LAN-side subnets.
D. Compression subnets are usually WAN-side subnets.
Answer: C

Juniper pdf   JN0-311   JN0-311

NO.6 Which two environments would take advantage of TCP Acceleration (AFP)? (Choose two.)
A. satellite networks
B. low-latency networks
C. long-haul link with 95% compressibility.
D. long-haul link with 10% compressibility.
Answer:AC

Juniper   JN0-311   JN0-311

NO.7 What are two ways to view the system log files on a WX device? (Choose two.)
A. Use the CLI and enter show log.
B. Use the CLI and enter show all.
C. Use the CLI and enter show logging.
D. In WebView, choose Admin > Tools > Display System Log.
Answer:AD

Juniper   JN0-311   JN0-311   JN0-311자격증   JN0-311 dump

NO.8 Which two statements describe the criteria bandwidth detection uses to dynamically alter bandwidth
allocation? (Choose two.)
A. Throughput is raised as latency decreases.
B. Throughput is based on available bandwidth.
C. Throughput is lowered as latency decreases.
D. Latency is measured by SYNs returned for each metapacket.
Answer:AB

Juniper   JN0-311덤프   JN0-311

NO.9 Which two configurations are made using the QoS Setup Wizard? (Choose two.)
A. Assign applications to traffic classes.
B. Use ToS/DSCP values for traffic classes.
C. Exclude subnets from QoS management.
D. Select dedicated vs. over-subscribed circuits.
Answer:AD

Juniper시험문제   JN0-311자료   JN0-311기출문제   JN0-311   JN0-311자료

NO.10 Which two patented or patent-pending compression and caching technologies are used for WX/WXC
devices? (Choose two.)
A. Network Sequence Caching (NSC)
B. Molecular Sequence Caching (MSC)
C. Network Sequence Reduction (NSR)
D. Molecular Sequence Reduction (MSR)
Answer:AD

Juniper dump   JN0-311시험문제   JN0-311   JN0-311

ITexamdump의 HP2-T23덤프의 VCE테스트프로그램과 700-302덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 VCP510PSE시험에 대비한 고품질 덤프와 70-415시험 최신버전덤프를 제공해드립니다. 최고품질 C2180-605시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/JN0-311.html

2013년 12월 23일 월요일

Juniper 자격증 JN0-343 시험문제와 답

여러분은 우리. ITExamDump의Juniper JN0-343시험자료 즉 덤프의 문제와 답만 있으시면Juniper JN0-343인증시험을 아주 간단하게 패스하실 수 있습니다.그리고 관련 업계에서 여러분의 지위상승은 자연적 이로 이루어집니다. ITExamDump의 덤프를 장바구니에 넣으세요. 그리고 ITExamDump에서는 무료로 24시간 온라인상담이 있습니다.

ITExamDump의 Juniper JN0-343덤프를 구매하기전 우선 pdf버전 덤프샘플을 다운받아 덤프문제를 공부해보시면ITExamDump덤프품질에 신뢰가 느껴질것입니다. ITExamDump의 Juniper JN0-343덤프가 고객님의 시험패스테 조금이나마 도움이 되신다면 행복으로 느끼겠습니다.

ITExamDump는JN0-343시험문제가 변경되면JN0-343덤프업데이트를 시도합니다. 업데이트가능하면 바로 업데이트하여 업데이트된 최신버전을 무료로 제공해드리는데 시간은 1년동안입니다. JN0-343시험을 패스하여 자격증을 취득하고 싶은 분들은ITExamDump제품을 추천해드립니다.온라인서비스를 찾아주시면 할인해드릴게요.

영어가 서툴러 국제승인 인기 IT인증자격증 필수시험 과목인Juniper인증 JN0-343시험에 도전할 엄두도 낼수 없다구요? 이런 생각은 이글을 보는 순간 버리세요. Juniper인증 JN0-343시험을 패스하려면ITExamDump가 고객님의 곁을 지켜드립니다. ITExamDump의Juniper인증 JN0-343덤프는 Juniper인증 JN0-343시험패스 특효약입니다. 영어가 서툴러고 덤프범위안의 문제만 기억하면 되기에 영어로 인한 문제는 걱정하지 않으셔도 됩니다.

ITExamDump을 선택함으로 100%인증시험을 패스하실 수 있습니다. 우리는Juniper JN0-343시험의 갱신에 따라 최신의 덤프를 제공할 것입니다. ITExamDump에서는 무료로 24시간 온라인상담이 있으며, ITExamDump의 덤프로Juniper JN0-343시험을 패스하지 못한다면 우리는 덤프전액환불을 약속 드립니다.

시험 번호/코드: JN0-343
시험 이름: Juniper (Juniper Networks Certified Internet Specialist (JNCIS-ENT))
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 393 문항
업데이트: 2013-12-22

인터넷에는Juniper인증 JN0-343시험대비공부자료가 헤아릴수 없을 정도로 많습니다.이렇게 많은Juniper인증 JN0-343공부자료중 대부분 분들께서 저희ITExamDump를 선택하는 이유는 덤프 업데이트가 다른 사이트보다 빠르다는 것이 제일 큰 이유가 아닐가 싶습니다. ITExamDump의 Juniper인증 JN0-343덤프를 구매하시면 덤프가 업데이트되면 무료로 업데이트된 버전을 제공받을수 있습니다.

JN0-343 덤프무료샘플다운로드하기: http://www.itexamdump.com/JN0-343.html

NO.1 Which Junos command correctly configures the ge-0/0/0.0 interface to operate only for IS-IS Level 2?
A. set interfaces ge-0/0/0.0 family iso level 2 enable
B. set interfaces ge-0/0/0.0 family iso level 1 disable
C. set protocols isis interface ge-0/0/0.0 level 2 enable
D. set protocols isis interface ge-0/0/0.0 level 1 disable
Answer: D

Juniper기출문제   JN0-343 dump   JN0-343자격증   JN0-343   JN0-343   JN0-343

NO.2 How much overhead does the GRE header add to an IPv4 packet?
A. 24 bytes
B. 32 bytes
C. 48 bytes
D. 64 bytes
Answer: A

Juniper   JN0-343   JN0-343인증   JN0-343

NO.3 What is the minimum configuration necessary to create two VLANs and two operational RVIs?
A. Option A
B. Option B
C. Option C
D. Option D
Answer: B

Juniper dump   JN0-343   JN0-343   JN0-343시험문제

NO.4 When loop protection is enabled on an interface, what happens when the port stops receiving BPDUs?
A. The port is placed in a loop-inconsistent role.
B. The port is placed into listening mode.
C. The port is transitioned into a forwarding state.
D. The interface is disabled.
Answer: A

Juniper   JN0-343   JN0-343인증   JN0-343 dump

NO.5 Which protocol is an IGP?
A. LACP
B. STP
C. OSPF
D. PAGP
Answer: B

Juniper dump   JN0-343기출문제   JN0-343기출문제   JN0-343 dump

NO.6 Click the Exhibit button.
Based on the exhibit, in which spanning-tree state would the indicated port be.?
A. listening
B. learning
C. forwarding
D. blocking
Answer: C

Juniper   JN0-343자료   JN0-343 dump   JN0-343   JN0-343

NO.7 Which command correctly assigns AS 65432 as the local router's autonomous system?
A. set protocols bgp local-as 65432
B. set routing-options local-as 65432
C. set protocols bgp autonomous-system 65432
D. set routing-options autonomous-system 65432
Answer: D

Juniper   JN0-343인증   JN0-343

NO.8 In the following output, what does the asterisk indicate?
A. The interface is configured as a trunk.
B. The interface is configured for spanning-tree protocol.
C. The interface is active.
D. The interface is inactive.
Answer: C

Juniper   JN0-343   JN0-343   JN0-343기출문제   JN0-343시험문제

NO.9 Which statements are true about graceful Routing Engines switchover (GRES)?
A. Configuration on both Routing Engines must be synchronized.
B. The backup Routing Engine cannot be managed through IP address because RPD does not run on
backup the Routing Engine.
C. Different hostnames must be configured on both Routing-Engines.
D. Both Routing-Engines are managed through a single out-of-band-management IP address.
Answer: A

Juniper   JN0-343   JN0-343

NO.10 Given the following output, what has been configured for the 192.168.3.0/24 prefix?
A. per-flow load balancing
B. a floating static route
C. per-packet load balancing
D. a qualified next hop
Answer: A

Juniper   JN0-343   JN0-343덤프   JN0-343   JN0-343덤프

NO.11 What are two valid BPDU types? (Choose two.)
A. topology change notification
B. configuration change
C. configuration
D. root bridge
Answer: A,C

Juniper   JN0-343   JN0-343인증   JN0-343 pdf

NO.12 Which configuration correctly sets interface ge-0/0/4 in trunk mode, carrying VLANs v10 and v20?
A. ge-0/0/4 {
unit 0 {
family ethernet-switching {
vlan {
members [ v10 v20 ];
}
} } }
B. ge-0/0/4 {
unit 0 {
family ethernet-switching {
port-mode trunk;
vlan {
members [ v10 v20 ];
}
}
}
}
C. ge-0/0/4 {
vlan-tagging;
unit 0 {
family ethernet-switching {
port-mode trunk;
vlan {
members [ v10 v20 ];
}
}
}
}
D. ge-0/0/4 {
unit 10 {
family ethernet-switching;
}
unit 20 {
family ethernet-switching;
}
}
Answer: B

Juniper   JN0-343최신덤프   JN0-343   JN0-343   JN0-343덤프   JN0-343기출문제

NO.13 Which of the following is enabled by default on an EX Series switch?
A. MAC move limiting
B. storm control
C. IP source guard
D. dynamic ARP inspection
Answer: B

Juniper   JN0-343최신덤프   JN0-343자격증   JN0-343 pdf

NO.14 What is the default behavior of a trunk port when it receives transit traffic without a VLAN tag?
A. It drops the traffic.
B. It forwards the traffic.
C. It tags the transit traffic with lowest VLAN ID permitted on the trunk.
D. It tags the transit traffic with highest VLAN ID permitted on the trunk.
Answer: A

Juniper   JN0-343   JN0-343   JN0-343

NO.15 Which configuration disables a port when more than 30,000 Kbps of broadcast traffic is received over
an aggregated Ethernet interface with two member links?
A. Option A
B. Option B
C. Option C
D. Option D
Answer: C

Juniper   JN0-343자격증   JN0-343덤프

NO.16 Configuring bpdu-timeout-action enables which protection mechanism?
A. root protection
B. BPDU protection
C. loop protection
D. RSTP protection
Answer: C

Juniper인증   JN0-343기출문제   JN0-343 dumps   JN0-343

NO.17 Which configuration summarizes external routes in the 172.16.0.0/22 range into a single prefix on an
ABR for Area 1?
A. protocols { ospf { area 0.0.0.1 {
nssa {
default-lsa {
default-metric 1;
metric-type 1;
}
}
area-range 172.16.0.0/22;
}
}
}
B. protocols {
ospf {
area 0.0.0.1 {
nssa {
area-range 172.16.0.0/22;
}
}
}
}
C. protocols {
ospf {
area 0.0.0.1 {
stub summaries;
}
}
}
D. protocols {
ospf {
area 0.0.0.1 {
nssa;
area-range 172.16.0.0/22 restrict;
}
}
}
Answer: B

Juniper자료   JN0-343기출문제   JN0-343   JN0-343   JN0-343   JN0-343 pdf

NO.18 An administrator finds that traffic from a large file download over an HTTP session is not load-balanced
across multiple links in a LAG. What is the possible cause?
A. Per-packet load-balancing is not configured.
B. The redundant path has a different IGP metric.
C. The hash key is not configured in the forwarding-options stanza.
D. This is the expected behavior.
Answer: D

Juniper   JN0-343   JN0-343덤프   JN0-343자료

NO.19 Which OSPF area type can contain Type 7 LSAs?
A. backbone
B. not-so-stubby
C. stub
D. totally stubby
Answer: B

Juniper자료   JN0-343   JN0-343시험문제   JN0-343자격증   JN0-343시험문제

NO.20 What is the correct sequence of OSPF adjacency formation?
A. Down, Init, ExStart, 2way, Loading, Exchange, Full
B. Down, 2way, Init, ExStart, Exchange, Loading, Full
C. Down, Init, 2way, ExStart, Exchange, Loading, Full
D. Down, Init, 2way, Loading, ExStart, Exchange, Full
Answer: C

Juniper   JN0-343최신덤프   JN0-343 dump   JN0-343자격증   JN0-343 pdf

NO.21 Which statement describes the default Junos OS behavior for OSPF?
A. External LSAs are advertised in a stub area.
B. An ABR does not announce a default route into a stub area.
C. Stub area internal routers generate a default route.
D. Only totally stubby areas need a default route.
Answer: B

Juniper시험문제   JN0-343기출문제   JN0-343   JN0-343   JN0-343최신덤프

NO.22 When processing inbound Ethernet frames, which firewall filter is evaluated first by an EX Series
switch?
A. port filter
B. VLAN filter
C. trunk filter
D. route filter
Answer: A

Juniper   JN0-343시험문제   JN0-343 pdf

NO.23 Which OSPF LSA type is sent by all routers in an area to advertise its connected subnets?
A. router
B. network
C. external
D. summary
Answer: A

Juniper기출문제   JN0-343   JN0-343   JN0-343인증   JN0-343   JN0-343자격증

NO.24 Which two pieces of information are communicated by IS-IS TLVs? (Choose two.)
A. network protocols supported
B. designated router priority
C. authentication key
D. PDU Length
Answer: A,C

Juniper dump   JN0-343시험문제   JN0-343덤프   JN0-343

NO.25 Which of the following can be used for both security and loop prevention?
A. firewall filters
B. DHCP snooping
C. dynamic ARP inspection D. MAC move limiting
Answer: D

Juniper   JN0-343자격증   JN0-343덤프   JN0-343   JN0-343최신덤프

NO.26 Which routing-instance type allows the sharing of interface routes and the support features used in
source-based routing?
A. virtual-router
B. vrf
C. forwarding
D. multi-instance
Answer: C

Juniper덤프   JN0-343   JN0-343자격증   JN0-343시험문제   JN0-343

NO.27 Which three statements correctly describe the default BGP advertisement behavior in the Junos OS?
(Choose three.)
A. Routes learned through EBGP are advertised to IBGP peers.
B. Routes learned through EBGP are advertised to other EBGP peers.
C. Routes learned through IBGP are advertised to other IBGP peers.
D. Routes learned through IBGP will be advertised to EBGP peers.
E. Routes learned through an IGP are automatically advertised to EBGP peers.
Answer: A,B,D

Juniper최신덤프   JN0-343   JN0-343자료

NO.28 Which two OSPF LSA types can be used to advertise routes between areas? (Choose two.)
A. router
B. network
C. external
D. summary
Answer: C,D

Juniper   JN0-343   JN0-343 dump   JN0-343인증

NO.29 Which BGP attributes are listed in the correct route selection order?
A. local preference, AS path, origin, MED
B. local preference, MED, AS path, origin
C. AS path, local preference, origin, MED
D. MED, origin, local preference, AS path
Answer: A

Juniper dump   JN0-343인증   JN0-343

NO.30 Which two of the following are functions of the BGP update message? (Choose two.)
A. It withdraws routes that are no longer valid.
B. It notes that an unsupported option is detected from the open message.
C. It transports routing information between BGP peers.
D. It readvertises routes that have already been sent and acknowledged.
Answer: A,C

Juniper   JN0-343   JN0-343   JN0-343기출문제   JN0-343 dump

ITexamdump의 DC0-260덤프의 VCE테스트프로그램과 74-325덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 642-996시험에 대비한 고품질 덤프와 JN0-694시험 최신버전덤프를 제공해드립니다. 최고품질 000-303시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/JN0-343.html

JN0-360 덤프 Juniper 인증

여러분은 아직도Juniper JN0-360인증시험의 난이도에 대하여 고민 중입니까? 아직도Juniper JN0-360시험 때문에 밤잠도 제대로 이루지 못하면서 시험공부를 하고 있습니까? 빨리빨리ITExamDump를 선택하여 주세요. 그럼 빠른 시일내에 많은 공을 들이지 않고 여러분으 꿈을 이룰수 있습니다.

ITExamDump 에서 제공해드리는 Juniper인증JN0-360시험덤프자료를 구입하시면 퍼펙트한 구매후 서비스를 약속드립니다. ITExamDump에서 제공해드리는 덤프는 IT업계 유명인사들이 자신들의 노하우와 경험을 토대로 하여 실제 출제되는 시험문제를 연구하여 제작한 최고품질의 덤프자료입니다. Juniper인증JN0-360시험은ITExamDump 표Juniper인증JN0-360덤프자료로 시험준비를 하시면 시험패스는 아주 간단하게 할수 있습니다. 구매하기전 PDF버전 무료샘플을 다운받아 공부하세요.

요즘 같은 인재가 많아지는 사회에도 많은 업계에서는 아직도 관련인재가 부족하다고 합니다.it업계에서도 이러한 상황입니다.Juniper JN0-360시험은 it인증을 받을 수 있는 좋은 시험입니다. 그리고ITExamDump는Juniper JN0-360덤프를 제공하는 사이트입니다.

우선 우리ITExamDump 사이트에서Juniper JN0-360관련자료의 일부 문제와 답 등 샘플을 제공함으로 여러분은 무료로 다운받아 체험해보실 수 있습니다.체험 후 우리의ITExamDump에 신뢰감을 느끼게 됩니다. ITExamDump에서 제공하는Juniper JN0-360덤프로 시험 준비하시면 편안하게 시험을 패스하실 수 있습니다.

시험 번호/코드: JN0-360
시험 이름: Juniper (Juniper Networks Certified Internet Specialist (JNCIS-SP))
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 252 문항
업데이트: 2013-12-22

자기한테 딱 맞는 시험준비공부자료 마련은 아주 중요한 것입니다. ITExamDump는 업계에 많이 알려져있는 덤프제공 사이트입니다. ITExamDump덤프자료가 여러분의 시험준비자료로 부족한 부분이 있는지는 구매사이트에서 무료샘플을 다운로드하여 덤프의일부분 문제를 우선 체험해보시면 됩니다. ITExamDump에서 제공해드리는 퍼펙트한 덤프는 여러분이 한방에 시험에서 통과하도록 최선을 다해 도와드립니다.

JN0-360 덤프무료샘플다운로드하기: http://www.itexamdump.com/JN0-360.html

NO.1 What are Martian addresses on a Junos device?
A. IP addresses that are reserved for use only with MPLS VPNs.
B. IP addresses that are never installed in the routing table.
C. IP addresses that are reserved for use only with GRE tunnels.
D. IP addresses specifically used for out-of-band management.
Answer: A

Juniper기출문제   JN0-360시험문제   JN0-360자격증   JN0-360기출문제
7. Which statement correctly describes the difference between a generated and an aggregate
route?
A. An aggregate route can be a supernet whereas generated routes are classful.
B. A generated route has a forwarding next hop that is inherited from a contributing route.
C. An aggregate route has a forwarding next hop that is inherited from a contributing route.
D. Only aggregate routes can be re-advertised through BGP using a policy.
Answer: B

Juniper   JN0-360기출문제   JN0-360기출문제   JN0-360기출문제
8. Which statement is true regarding the default master routing instance?
A. All IPv4 routes in the master routing instance are shared with user-defined routing instances.
B. Interface routes in the master routing instance are shared with user-defined routing instances.
C. Routes in the master routing instance are not shared with user-defined routing instances.
D. All routes in the master routing instance are shared with user-defined routing instances.
Answer: C

Juniper pdf   JN0-360   JN0-360자격증   JN0-360
9. Which routing table contains the route information for the user-defined routing instance
called Candidate1?
A. inet.Candidate1.0
B. Candidate1.inet.0
C. inet.0
D. Candidate1-inet.0
Answer: B

Juniper   JN0-360   JN0-360인증   JN0-360
10. Which two routing-instance types are used for non-VPN-related applications? (Choose two.)
A. virtual-router
B. vrf
C. forwarding
D. vpls
Answer: A,C

Juniper   JN0-360자료   JN0-360자료   JN0-360 dumps   JN0-360자격증

NO.2 For a network running single-area OSPF, how would you decrease the size of the link-state
database (LSDB)?
A. Implement RIP as an overlay protocol on all devices.
B. Add more devices to the OSPF network to help with LSDB processing.
C. Reduce the frequency of hello timers throughout the network.
D. Implement OSPF areas.
Answer: B

Juniper자격증   JN0-360 pdf   JN0-360덤프   JN0-360

NO.3 Which Junos platform supports provider bridging?
A. T Series devices
B. SRX Series devices
C. MX Series devices
D. MAG Series devices
Answer: D

Juniper   JN0-360덤프   JN0-360

NO.4 In which environment would you run BGP?
A. a company spread across multiple floors of a building
B. a company with a single office
C. a home network
D. the public Internet
Answer: C

Juniper   JN0-360시험문제   JN0-360시험문제   JN0-360

NO.5 Which two statements are true about MPLS VPNs? (Choose two.)
A. With Layer 3 VPNs, the provider's routers participate in the customer's Layer 3 routing.
B. MPLS VPNs are designed to run over private networks rather than the public Internet.
C. With Layer 2 VPNs, the provider does not participate in the routing of the customer's private IP
traffic.
D. MPLS VPN tunnels are always encrypted.
Answer: B,D

Juniper   JN0-360   JN0-360   JN0-360인증   JN0-360자료

NO.6 Which label operation is performed by an MPLS transit router?
A. inject
B. pop
C. push
D. swap
Answer: A

Juniper   JN0-360 dump   JN0-360   JN0-360

ITexamdump의 1Z0-466덤프의 VCE테스트프로그램과 000-052덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 JN0-533시험에 대비한 고품질 덤프와 LOT-951시험 최신버전덤프를 제공해드립니다. 최고품질 BAS-004시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/JN0-360.html

Juniper 인증한 JN0-660 덤프

Juniper인증 JN0-660시험을 가장 빠른 시일내에 가장 쉬운 방법으로 패스하는 방법을 고심초사한끝에 ITExamDump에서 연구해 내었습니다. 그건 바로ITExamDump의Juniper인증 JN0-660덤프로Juniper인증 JN0-660시험에 대비하는것입니다. ITExamDump의Juniper인증 JN0-660덤프품질을 검증하려면 구매사이트의 무료샘플을 체험해보시면 됩니다.자격증을 많이 취득하여 멋진 IT전문가로 되세요.

인터넷에는Juniper인증 JN0-660시험대비공부자료가 헤아릴수 없을 정도로 많습니다.이렇게 많은Juniper인증 JN0-660공부자료중 대부분 분들께서 저희ITExamDump를 선택하는 이유는 덤프 업데이트가 다른 사이트보다 빠르다는 것이 제일 큰 이유가 아닐가 싶습니다. ITExamDump의 Juniper인증 JN0-660덤프를 구매하시면 덤프가 업데이트되면 무료로 업데이트된 버전을 제공받을수 있습니다.

우리ITExamDump 사이트에Juniper JN0-660관련자료의 일부 문제와 답 등 문제들을 제공함으로 여러분은 무료로 다운받아 체험해보실 수 있습니다. 여러분은 이것이야 말로 알맞춤이고, 전면적인 여러분이 지금까지 갖고 싶었던 문제집이라는 것을 느끼게 됩니다.

JN0-660인증시험패스는 쉬운 일은 아닙니다. 높은 전문지식은 필수입니다.하지만 자신은 이 방면 지식이 없다면 ITExamDump가 도움을 드릴 수 있습니다. ITExamDump의 전문가들이 자기만의 지식과 지금까지의 경험으로 최고의 IT인증관련자료를 만들어 여러분들의 고민을 해결해드릴 수 있습니다. 우리는 최고의JN0-660인증시험문제와 답을 제공합니다. ITExamDump는 최선을 다하여 여러분이 한번에JN0-660인증시험을 패스하도록 도와드릴 것입니다. 여러분은 우리 ITExamDump 선택함으로 일석이조의 이익을 누릴 수 있습니다. 첫쨰는 관여지식은 아주 알차게 공부하실 수 있습니다.둘째는 바로 시험을 안전하게 한번에 통과하실 수 있다는 거죠.그리고 우리는 일년무료 업데이트서비스를 제공합니다.덤프가 업뎃이되면 우리는 모두 무료로 보내드립니다.만약 시험에서 실패한다면 우리 또한 덤프비용전액을 환불해 드립니다.

우리ITExamDump가 제공하는 최신, 최고의Juniper JN0-660시험관련 자료를 선택함으로 여러분은 이미 시험패스성공이라고 보실수 있습니다.

ITExamDump에서 제공해드리는 Juniper인증 JN0-660덤프는 가장 출중한Juniper인증 JN0-660시험전 공부자료입니다. 덤프품질은 수많은 IT인사들로부터 검증받았습니다. Juniper인증 JN0-660덤프뿐만아니라 ITExamDump에서는 모든 IT인증시험에 대비한 덤프를 제공해드립니다. IT인증자격증을 취득하려는 분들은ITExamDump에 관심을 가져보세요. 구매의향이 있으시면 할인도 가능합니다. 고득점으로 패스하시면 지인분들께 추천도 해주실거죠?

시험 번호/코드: JN0-660
시험 이름: Juniper (Service Provider Routing and Switching, Professional)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 171 문항
업데이트: 2013-12-22

JN0-660 덤프무료샘플다운로드하기: http://www.itexamdump.com/JN0-660.html

NO.1 Click the Exhibit button.
In the exhibit, Area 1 is a not-so-stubby area.
Three networks are redistributed into Area 1 on R2.
You must summarize the redistributed network addresses in Area 1 so that only one network prefix is
re-advertised into Area 0. You must also summarize the loopback addresses of R1 and R2 into a single
address in Area 0.Which configuration sample on R3 and R5 will complete this task?
A. Option A
B. Option B
C. Option C
D. Option D
Answer: C

Juniper   JN0-660인증   JN0-660   JN0-660

NO.2 Which CoS feature supports per-VLAN queuing and scheduling?
A. multilevel scheduling
B. hierarchical scheduling
C. tagged queuing
D. per-instance queuing
Answer: C

Juniper   JN0-660덤프   JN0-660인증   JN0-660

NO.3 Click the Exhibit button.
As shown in the exhibit, you have an adaptive LSP that requires 85 Mbps. The LSP is configured with a
primary path and a secondary path in standby mode. All connections in the MPLS network are Fast
Ethernet. Which statement is correct?
A. The primary and secondary paths are in an up state and operational.
B. The primary and secondary paths are in a down state and not operational.
C. The secondary path is in a down state and not operational.
D. The primary path is in a down state and not operational.
Answer: A

Juniper   JN0-660최신덤프   JN0-660 pdf   JN0-660최신덤프   JN0-660   JN0-660

NO.4 Click the Exhibit button.
You are asked to configure an OSPF network based on the topology shown in the exhibit. You must keep
the link-state database in Area 1 as small as possible. What will accomplish this?
A. Area 0 should be configured as a stub area so that it will not announce routes into Area 1.
B. Area 1 should be configured as an NSSA to limit the size of the link-state database.
C. Area 1 should be configured as a stub area with no-summaries to limit the size of the link-state
database.
D. Area 0 should be configured with a virtual link to R4 to limit the size of the Area 1 link-state database.
Answer: C

Juniper   JN0-660   JN0-660 dumps   JN0-660

NO.5 Your multicast receivers are indirectly connected to an MX Series router. The receivers need to join
multicast group 224.2.2.2. What must be configured in IGMP to receive report messages from receivers
that are multiple hops away?
A. By default, IGMP accepts report messages from indirectly connected receivers.
B. Promiscuous mode must be enabled in IGMP.
C. Promiscuous mode must be disabled in IGMP.
D. DVMRP protocol must be configured.
Answer: B

Juniper   JN0-660인증   JN0-660 pdf   JN0-660 dump   JN0-660

NO.6 Click the Exhibit button.
In the exhibit, ISP A is charged a higher rate for traffic sent to R2. You are asked to lower costs for ISP A
by configuring R1 to send traffic to R3 whenever possible.
What are two ways to do this? (Choose two.)
A. set protocols bgp group isp-b neighbor 192.0.2.6 local-preference 120
B. set protocols bgp group isp-b neighbor 192.0.2.6 local-preference 80
C. set protocols bgp group isp-b neighbor 192.0.2.10 local-preference 120
D. set protocols bgp group isp-b neighbor 192.0.2.10 local-preference 80
Answer: B, C

Juniper   JN0-660자료   JN0-660   JN0-660최신덤프   JN0-660자격증

NO.7 You are the administrator for a network that uses IBGP. As the network grows, you must examine
options to support increased scale.
Which two scaling options should you consider? (Choose two.)
A. route reflection
B. areas
C. zones
D. confederations
Answer: B, C

Juniper   JN0-660 dumps   JN0-660

NO.8 Click the Exhibit button.
All routers in the exhibit are running IS-IS level 2 routing. The wide-metrics-only parameter is configured
on all routers. Which metric does R1 see for the path to R4?
A. 136
B. 138
C. 310
D. 320
Answer: D

Juniper pdf   JN0-660 pdf   JN0-660기출문제

NO.9 You are provisioning a new customer for access to your Layer 3 VPN. The customer is using
172.16.35.0/24 as their internal IP address space, which is also being used by an existing Layer 3 VPN
customer. The two customers share many PE routers in common across your network. Which mechanism
allows these duplicate addresses to exist in your network?
A. route origin
B. route target
C. route refresh
D. route distinguisher
Answer: D

Juniper   JN0-660   JN0-660 dump   JN0-660자료   JN0-660자격증

NO.10 You manage an MPLS network where the PE devices consist of multiple vendors.
You are asked to conceal the MPLS topology for all LSPs.
Which global configuration parameter will accomplish this?
A. Configure no-decrement-ttl on the ingress router only.
B. Configure no-propagate-ttl on the ingress router only.
C. Configure no-decrement-ttl on all routers within the MPLS network.
D. Configure no-propagate-ttl on all routers within the MPLS network.
Answer: D

Juniper   JN0-660시험문제   JN0-660

NO.11 Click the Exhibit button.
Given the drop profile in the exhibit, what is the drop probability when the buffer reaches 90% full?
A. 60%
B. 70%
C. 85%
D. 90%
Answer: B

Juniper자료   JN0-660덤프   JN0-660 pdf   JN0-660   JN0-660 dumps

NO.12 In which two ways does VPLS populate the MAC table? (Choose two.)
A. dynamically using BGP
B. dynamically using the source MAC address on received frames
C. dynamically using LDP
D. statically using CLI
Answer: B, D

Juniper시험문제   JN0-660자료   JN0-660덤프   JN0-660

NO.13 Click the Exhibit button.
On your MX Series router, traffic using the critical scheduler is out of profile. All other data is currently in
profile. Referring to the exhibit, which statement is correct?
A. The critical queue is serviced before the less-critical queue.
B. The critical queue is serviced after the left-over queue.
C. The critical queue is serviced before the data queue.
D. The critical queue is serviced before the voice queue.
Answer: B

Juniper   JN0-660 dumps   JN0-660자료   JN0-660자격증

NO.14 Which operational mode command displays the number of configured forwarding classes?
A. show interfaces queue ge-1/0/0
B. show interfaces terse
C. show class-of-service interface
D. show forwarding classes
Answer: A

Juniper기출문제   JN0-660   JN0-660최신덤프   JN0-660   JN0-660

NO.15 Click the Exhibit button.
All networks shown in the exhibit contain more than one BGP speaking router. You operate ISP A.
You must ensure that customer Y sends their traffic to you over the directly connected link but customer Y
is not used for transit into your network. What do you do to accomplish this? A. Advertise routes to
customer Y with the well-known no-transit community.
B. Advertise routes to customer X with the well-known no-advertise community.
C. Advertise routes to customer Y with the well-known no-export community.
D. Advertise routes to customer X with the well-known as-transit community.
Answer: C

Juniper시험문제   JN0-660자료   JN0-660자료   JN0-660

NO.16 Which two statements are true about OSPFv3? (Choose two.)
A. OSPFv3 uses a 32-bit router ID to uniquely identify a node in the network.
B. OSPFv3 uses a 128-bit router ID to uniquely identify a node in the network.
C. OSPFv3 routes are always preferred over OSPFv2 routes for all traffic.
D. OSPFv3 and OSPFv2 can be configured at the same time.
Answer: A, D

Juniper   JN0-660자격증   JN0-660인증   JN0-660 dump   JN0-660 dump

NO.17 Click the Exhibit button.
Referring to the exhibit, which MPLS feature was used to make the LSP the preferred path for internal
routes.?
A. traffic engineering bgp-igp
B. traffic engineering shortcuts
C. traffic engineering mpls-forwarding
D. install active
Answer: C

Juniper   JN0-660   JN0-660 pdf   JN0-660기출문제

NO.18 Click the Exhibit button.
Referring to the exhibit, which type of traffic protection mechanism is used for the LSP?
A. fast-reroute
B. link-protection
C. node-link-protection
D. secondary
Answer: B

Juniper기출문제   JN0-660   JN0-660

NO.19 Your are the administrator for a network that uses IS-IS as its IGP. As the network grows, you find that
the protocol's default capabilities for setting metrics is limiting your options. Which feature can you
implement to provide a larger range of metric configuration capabilities?
A. extended metrics
B. wide metrics
C. expanded metrics
D. full metrics
Answer: D

Juniper   JN0-660   JN0-660   JN0-660최신덤프

NO.20 Click the Exhibit button.
Based on the configuration in the exhibit, which statement is correct?
A. The 172.20.20.0/24 route is installed in the inet.0 table with the next hop of the LSP.
B. The 172.20.20.0/24 route is installed in the mpls.0 table with the next hop of the LSP.
C. The 172.20.20.0/24 route is installed in the inet.3 table with the next hop of the LSP.
D. The 172.20.20.0/24 route is installed in the inet6.3 table with the next hop of the LSP.
Answer: C

Juniper인증   JN0-660덤프   JN0-660덤프

ITexamdump의 100-101덤프의 VCE테스트프로그램과 C_TSCM52_64덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 70-332시험에 대비한 고품질 덤프와 E20-553시험 최신버전덤프를 제공해드립니다. 최고품질 HP2-N37시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/JN0-660.html

JN0-370 덤프 Juniper 인증 시험

우리ITExamDump에서는 끊임없는 업데이트로 항상 최신버전의Juniper인증JN0-370시험덤프를 제공하는 사이트입니다, 만약 덤프품질은 알아보고 싶다면 우리ITExamDump 에서 무료로 제공되는 덤프일부분의 문제와 답을 체험하시면 되겠습니다, ITExamDump 는 100%의 보장 도를 자랑하며JN0-370시험은 한번에 패스할 수 있는 덤프입니다.

여러분이 어떤 업계에서 어떤 일을 하든지 모두 항상 업그레이되는 자신을 원할 것입니다.,it업계에서도 이러합니다.모두 자기자신의 업그레이는 물론 자기만의 공간이 있기를 바랍니다.전문적인 IT인사들은 모두 아시다싶이Juniper JN0-370인증시험이 여러분의 이러한 요구를 만족시켜드립니다.그리고 우리 ITExamDump는 이러한 꿈을 이루어드립니다.

시험 번호/코드: JN0-370
시험 이름: Juniper (QFabric, Specialist (JNCIS-QF))
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 108 문항
업데이트: 2013-12-22

우리는 여러분이 시험패스는 물론 또 일년무료 업데이트서비스를 제공합니다.만약 시험에서 실패했다면 우리는 덤프비용전액 환불을 약속 드립니다.하지만 이런 일은 없을 것입니다.우리는 우리덤프로 100%시험패스에 자신이 있습니다. 여러분은 먼저 우리 ITExamDump사이트에서 제공되는Juniper인증JN0-370시험덤프의 일부분인 데모 즉 문제와 답을 다운받으셔서 체험해보실 수 잇습니다.

ITExamDump는 여러분을 성공으로 가는 길에 도움을 드리는 사이트입니다. ITExamDump에서는 여러분이 안전하게 간단하게Juniper인증JN0-370시험을 패스할 수 있는 자료들을 제공함으로 빠른 시일 내에 IT관련지식을 터득하고 한번에 시험을 패스하실 수 있습니다.

JN0-370 덤프무료샘플다운로드하기: http://www.itexamdump.com/JN0-370.html

ITexamdump의 HP2-Z26덤프의 VCE테스트프로그램과 1z0-599덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 156-315.13시험에 대비한 고품질 덤프와 ST0-237시험 최신버전덤프를 제공해드립니다. 최고품질 000-224시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/JN0-370.html

Juniper 자격증 JN0-730 시험덤프

ITExamDump는Juniper JN0-730시험을 패스할 수 있는 아주 좋은 사이트입니다. ITExamDump은 아주 알맞게 최고의Juniper JN0-730시험문제와 답 내용을 만들어 냅니다. 덤프는 기존의 시험문제와 답과 시험문제분석 등입니다. ITExamDump에서 제공하는Juniper JN0-730시험자료의 문제와 답은 실제시험의 문제와 답과 아주 비슷합니다.

ITExamDump의Juniper인증 JN0-730덤프의 인지도는 아주 높습니다. 인지도 높은 원인은Juniper인증 JN0-730덤프의 시험적중율이 높고 가격이 친근하고 구매후 서비스가 끝내주기 때문입니다. ITExamDump의Juniper인증 JN0-730덤프로Juniper인증 JN0-730시험에 도전해보세요.

ITExamDump는 모든 IT관련 인증시험자료를 제공할 수 있는 사이트입니다. 우리ITExamDump는 여러분들한테 최고 최신의 자료를 제공합니다. ITExamDump을 선택함으로 여러분은 이미Juniper JN0-730시험을 패스하였습니다. 우리 자료로 여러분은 충분히Juniper JN0-730를 패스할 수 있습니다. 만약 시험에서 떨어지셨다면 우리는 백프로 환불은 약속합니다. 그리고 갱신이 된 최신자료를 보내드립니다. 하지만 이런사례는 거이 없었습니다.모두 한번에 패스하였기 때문이죠. ITExamDump는 여러분이Juniper JN0-730인증시험 패스와 추후사업에 모두 도움이 되겠습니다. Pass4Tes의 선택이야말로 여러분의 현명한 선택이라고 볼수 있습니다. Pass4Tes선택으로 여러분은 시간도 절약하고 돈도 절약하는 일석이조의 득을 얻을수 있습니다. 또한 구매후 일년무료 업데이트버전을 바을수 있는 기회를 얻을수 있습니다.

시험 번호/코드: JN0-730
시험 이름: Juniper (DX, Specialist (JNCIS-DX))
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 270 문항
업데이트: 2013-12-22

ITExamDump 는 아주 우수한 IT인증자료사이트입니다. 우리ITExamDump에서 여러분은Juniper JN0-730인증시험관련 스킬과시험자료를 얻을수 있습니다. 여러분은 우리ITExamDump 사이트에서 제공하는Juniper JN0-730관련자료의 일부분문제와답등 샘플을 무료로 다운받아 체험해볼 수 있습니다. 그리고ITExamDump에서는Juniper JN0-730자료구매 후 추후 업데이트되는 동시에 최신버전을 무료로 발송해드립니다. 우리는Juniper JN0-730인증시험관련 모든 자료를 여러분들에서 제공할 것입니다. 우리의 IT전문 팀은 부단한 업계경험과 연구를 이용하여 정확하고 디테일 한 시험문제와 답으로 여러분을 어시스트 해드리겠습니다.

경쟁이 치열한 IT업계에서 굳굳한 자신만의 자리를 찾으려면 국제적으로 인정받는 IT자격증 취득은 너무나도 필요합니다. Juniper인증 JN0-730시험은 IT인사들중에서 뜨거운 인기를 누리고 있습니다. ITExamDump는 IT인증시험에 대비한 시험전 공부자료를 제공해드리는 전문적인 사이트입니다.한방에 쉽게Juniper인증 JN0-730시험에서 고득점으로 패스하고 싶다면ITExamDump의Juniper인증 JN0-730덤프를 선택하세요.저렴한 가격에 비해 너무나도 높은 시험적중율과 시험패스율, 언제나 여러분을 위해 최선을 다하는ITExamDump가 되겠습니다.

JN0-730 덤프무료샘플다운로드하기: http://www.itexamdump.com/JN0-730.html

NO.1 Which operating system is used on a NetScreen device?
A. IOS
B. Junos
C. FreeBSD
D. ScreenOS
Answer: A

Juniper자격증   JN0-730   JN0-730기출문제   JN0-730인증

NO.2 In the packet flow decision process, which pair identifies interzone traffic?
A. source and destination MAC
B. source and destination interface
C. source and destination TCP port
D. source and destination IP address
Answer: B

Juniper기출문제   JN0-730자격증   JN0-730인증   JN0-730최신덤프

NO.3 In the packet forwarding decision process, how is the second packet handled differently than
the first in a series of allowed interzone packets?
A. The second packet causes an ARP query.
B. The second packet is checked against the policy table.
C. The second packet is forwarded without a sanity check.
D. The second packet is forwarded without checking the route table.
Answer: D

Juniper   JN0-730 pdf   JN0-730   JN0-730자료   JN0-730덤프

NO.4 When a firewall receives the first packet in a series, what will it immediately do?
A. Check its route table.
B. Check its session table.
C. Determine if traffic is crossing zones.
D. Verify that it is not malformed or a fragment.
Answer: D

Juniper기출문제   JN0-730   JN0-730자료

NO.5 Using the CLI, if the startup copy of the ScreenOS is corrupted, from which location can an
image be loaded?
A. TFTP server
B. internal flash
C. PCMCIA card
D. Compact Flash Card
Answer: A

Juniper dumps   JN0-730덤프   JN0-730시험문제   JN0-730자격증   JN0-730 dumps

NO.6 What is a zone used for?
A. to bundle interfaces together for redundancy
B. to bundle interfaces sharing identical security requirements
C. to provide a tunneled connection across a network
D. to protect against spam attacks
Answer: D

Juniper   JN0-730   JN0-730 dumps   JN0-730인증

NO.7 Which security feature provides secure tunnels across a public network?
A. dynamic routing
B. Web filtering
C. IPsec
D. firewall filters
Answer: A

Juniper   JN0-730 pdf   JN0-730   JN0-730 pdf

NO.8 What is the initial default username and password for all ScreenOS devices?
A. administrator/password
B. root/password
C. netscreen/netscreen
D. admin/netscreen1
Answer: D

Juniper   JN0-730   JN0-730

NO.9 Which two devices run ScreenOS software? (Choose two.)
A. NetScreen-5200
B. NetScreen-5400
C. SRX240
D. MX480
Answer: C,D

Juniper   JN0-730기출문제   JN0-730덤프   JN0-730 dumps   JN0-730

NO.10 A ScreenOS firewall has one interface in the user zone and one interface in the servers zone.
Both interfaces are addressed and active.
The configured policy allows user traffic from the user zone to the FTP server in the servers zone,
but the traffic does not cross the firewall from the client to the server.
What is the most likely problem with the firewall?
A. The ScreenOS firewall has no physical connection to the FTP server.
B. The ALG option on the ScreenOS firewall has not been enabled for FTP traffic.
C. The ScreenOS firewall does not have a route defined to the FTP server's subnet.
D. The ScreenOS firewall does not have a route defined to the FTP client's subnet.
Answer: C

Juniper   JN0-730인증   JN0-730   JN0-730

NO.11 In the flow decision process, the system has found a route entry matching the packet
destination IP .
Which pair will identify the policy that is applied to this packet?
A. source and destination MAC
B. source and destination interface
C. source and destination TCP port
D. source and destination IP address
Answer: B

Juniper   JN0-730   JN0-730덤프   JN0-730

NO.12 Using the CLI, if the startup copy of the ScreenOS on a NS-204 is corrupted, from which two (2)
alternate locations can an image be loaded?
A. ROM
B. TFTP server
C. Internal Flash
D. PCMCIA Card
E. Compact Flash Card
Answer: B,E

Juniper   JN0-730 dump   JN0-730최신덤프   JN0-730

NO.13 By default, from which hardware component is the startup copy of the ScreenOS loaded?
A. ROM
B. NVRAM
C. TFTP server
D. Internal Flash
E. PCMCIA Card
Answer: D

Juniper기출문제   JN0-730   JN0-730기출문제   JN0-730 dump

NO.14 When is NAT used?
A. for Layer 2 switching
B. for MPLS VPNs
C. to translate between IP addresses
D. for secure tunnels
Answer: B

Juniper   JN0-730인증   JN0-730덤프   JN0-730   JN0-730자료

NO.15 By default, from which hardware component is the startup copy of the ScreenOS loaded?
A. NVRAM
B. TFTP server
C. internal flash
D. PCMCIA card
Answer: C

Juniper   JN0-730   JN0-730   JN0-730   JN0-730   JN0-730

ITexamdump의 700-104덤프의 VCE테스트프로그램과 MB6-870덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 1z0-559시험에 대비한 고품질 덤프와 70-482시험 최신버전덤프를 제공해드립니다. 최고품질 MSC-331시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/JN0-730.html