현재 경쟁울이 심한IT시대에,Microsoft 070-506-VB자격증 취득만으로 이 경쟁이 심한 사회에서 자신만의위치를 보장할수 있고 더욱이는 한층업된 삶을 누릴수 있을수도 있습니다. 우리ITExamDump 에서 여러분은Microsoft 070-506-VB관련 학습지도서를 얻을 수 있습니다. 우리ITExamDump는 IT업계엘리트 한 강사들이 퍼펙트한Microsoft 070-506-VB문제집을 만들어서 제공합니다. 우리가 제공하는Microsoft 070-506-VB문제와 답으로 여러분은 한번에 성공적으로 시험을 패스 하실수 있습니다. 중요한것 저희 문제집을 선택함으로 여러분의 시간도 절약해드리고 무엇보다도 많은 근심없이 심플하게 시험을 패스하여 좋다는 점입니다.
한번에Microsoft인증070-506-VB시험을 패스하고 싶으시다면 완전 페펙트한 준비가 필요합니다. 완벽한 관연 지식터득은 물론입니다. 우리ITExamDump의 자료들은 여러분의 이런 시험준비에 많은 도움이 될 것입니다.
자신을 부단히 업그레이드하려면 많은 노력이 필요합니다. IT업종 종사자라면 국제승인 IT인증자격증을 취득하는것이 자신을 업그레이드하는것과 같습니다. Microsoft인증 070-506-VB시험을 패스하여 원하는 자격증을 취득하려면ITExamDump의Microsoft인증 070-506-VB덤프를 추천해드립니다. 하루빨리 덤프를 공부하여 자격증 부자가 되세요.
Microsoft인증 070-506-VB시험이 너무 어려워 보여서 오르지못할 산처럼 보이시나요? 그건ITExamDump의 Microsoft인증 070-506-VB시험문제에 대비하여 제작한Microsoft인증 070-506-VB덤프가 있다는 것을 모르고 있기때문입니다. Microsoft인증 070-506-VB시험에 도전하고 싶으시다면 최강 시험패스율로 유명한ITExamDump의 Microsoft인증 070-506-VB덤프로 시험공부를 해보세요.시간절약은 물론이고 가격도 착해서 간단한 시험패스에 딱 좋은 선택입니다.
ITExamDump 의 Microsoft인증 070-506-VB덤프는 PDF버전과 소프트웨어버전 두가지 버전으로 되어있는데 소프트웨어버전은 시뮬레이션버전입니다. 소프트웨어버전의 문제를 푸는 과정은 시험현장을 연상케하여 시험환경에 먼저 적응하여 실제시험에서 높은 점수를 받도록 도와드릴수 있습니다.
시험 번호/코드: 070-506-VB
시험 이름: Microsoft (TS: Microsoft Silverlight 4, Development)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 75 문항
업데이트: 2014-01-16
IT인증자격증은 여느때보다 강렬한 경쟁율을 보이고 있습니다. Microsoft 인증070-506-VB시험을 통과하시면 취직 혹은 승진이나 연봉협상에 많은 도움이 되어드릴수 있습니다. Microsoft 인증070-506-VB시험이 어려워서 통과할 자신이 없다구요? ITExamDump덤프만 있으면 이런 고민은 이제 그만 하지않으셔도 됩니다. ITExamDump에서 출시한 Microsoft 인증070-506-VB덤프는 시장에서 가장 최신버전입니다.
070-506-VB 덤프무료샘플다운로드하기: http://www.itexamdump.com/070-506-VB.html
NO.1 Private Sub worker_ProgressChanged(sender As Object, e As ProgressChangedEventArgs)
NO.2 You are developing a Silverlight 4 application.
The application contains an XAML page that defines the following Grid control.
<Grid Name="gridBody" >
<Grid.RowDefinitions>
<RowDefinition />
<RowDefinition />
</Grid.RowDefinitions>
<TextBlock Text="Employee Info" />
<TextBlock Text="Please enter employee info" Grid.Row="1" Height="20" VerticalAlignment="Top" />
<TextBox x:Name="EmpInfo" Grid.Row="1" Margin="0,25,0,0" TextWrapping="Wrap" />
...
</Grid>
The code-behind file for myPage.xaml contains the following code segment. (Line numbers are included
for reference only.)
01 Public Sub New()
02 InitializeComponent()
03
04 Dim control As UserControl = New MyCustomControl()
05
06 End Sub
You need to replace the contents of the second row of gridBody with a user control of the
MyCustomControl type.
Which code segment should you insert at line 05?
A. gridBody.Children.Insert(1, control)
B. gridBody.RowDefinitions.Remove(gridBody.RowDefinitions(1))
gridBody.Children.Insert(1, control)
C. gridBody.RowDefinitions.Remove(gridBody.RowDefinitions(1))
gridBody.Children.Insert(1, control)
gridBody.Children.Clear()
Grid.SetRow(control, 1)
gridBody.Children.Add(control)
D. gridBody.RowDefinitions.Remove(gridBody.RowDefinitions(1))
gridBody.Children.Insert(1, control)
gridBody.Children.Clear()
Grid.SetRow(control, 1)
gridBody.Children.Add(control)
Answer: D
Microsoft 070-506-VB 070-506-VB 070-506-VB pdf 070-506-VB
NO.3 You are developing a Silverlight 4 application.
The application defines the following XAML fragment. (Line numbers are included for reference only.)
01 <ComboBox>
02 <ComboBoxItem Content="Item 1" />
03 <ComboBoxItem Content="Item 2" />
04 <ComboBoxItem Content="Item 3" />
05 </ComboBox>
The code-behind file contains the following code segment. (Line numbers are included for reference only.)
06 Private Sub PrintText(sender As Object, args As SelectionChangedEventArgs)
07
08 MessageBox.Show("You selected " + cbi.Content.ToString() + ".")
09 End Sub
You need to ensure that when the user selects an item in a ComboBox control, the content of the item is
displayed.
What should you do?
A. Replace the following XAML fragment at line 01.
<ComboBox SelectionChanged="PrintText">
Add the following code segment at line 07.
Dim cbi As ComboBoxItem = TryCast(TryCast(sender, ComboBox).SelectedItem, ComboBoxItem)
B. Replace the following XAML fragment at line 01.
<ComboBox SelectionChanged="PrintText">
Add the following code segment at line 07.
Dim cbi As ComboBoxItem = TryCast(TryCast(sender, ComboBox).SelectedIndex, ComboBoxItem)
C. Replace the following XAML fragment at line 01.
<ComboBox DropDownClosed="PrintText">
Add the following code segment at line 07.
Dim cbi As ComboBoxItem = TryCast(TryCast(sender, ComboBox).SelectedItem, ComboBoxItem)
D. Replace the following XAML fragment at line 01.
<ComboBox DropDownClosed="PrintText">
Add the following code segment at line 07.
Dim cbi As ComboBoxItem = TryCast(TryCast(sender, ComboBox).SelectedIndex, ComboBoxItem)
Answer: A
Microsoft최신덤프 070-506-VB자료 070-506-VB 070-506-VB dump 070-506-VB 070-506-VB
NO.4 statusTextBlock.Text = Convert.ToString(e.ProgressPercentage) & "%"
NO.5 You are developing an application by using Silverlight 4 and Microsoft .NET Framework 4.
The application contains the following XAML fragment.
<TextBlock x:Name="QuoteOfTheDay" />
The application calls a Windows Communication Foundation (WCF) service named MyService that
returns the quote of the day and assigns it to the QuoteOfTheDay TextBlock.
The application contains the following code segment. (Line numbers are included for reference only.)
01 Dim client = New MyService.MyServiceClient()
02 AddHandler client.GetQuoteOfTheDayCompleted, Sub(s, args) QuoteOfTheDay.Text = args.Result
03 client.GetQuoteOfTheDayAsync()
You need to handle errors that might occur as a result of the service call. You also need to provide a
default value of "Unavailable" when an error occurs.
Which code segment should you replace at lines 02 and 03?
A. QuoteOfTheDay.Text = "Unavailable"
AddHandler client.GetQuoteOfTheDayCompleted, Sub(s, args)
QuoteOfTheDay.Text = args.Result
End Sub
client.GetQuoteOfTheDayAsync()
B. AddHandler client.GetQuoteOfTheDayCompleted,Sub(s, args)
If args.Result IsNot Nothing Then
QuoteOfTheDay.Text = args.Result
Else
QuoteOfTheDay.Text = "Unavailable"
End If
End Sub
client.GetQuoteOfTheDayAsync()
C. AddHandler client.GetQuoteOfTheDayCompleted, Sub(s, args)
QuoteOfTheDay.Text = args.Result
End Sub
Try
client.GetQuoteOfTheDayAsync()
Catch ex As Exception
' TODO: handle exception
QuoteOfTheDay.Text = "Unavailable"
End Try
D. AddHandler client.GetQuoteOfTheDayCompleted, Sub(s, args)
If args.[Error] Is Nothing Then
QuoteOfTheDay.Text = args.Result
Else
' TODO: handle error
QuoteOfTheDay.Text = "Unavailable"
End If
End Sub
client.GetQuoteOfTheDayAsync()
Answer: D
Microsoft자격증 070-506-VB 070-506-VB자격증 070-506-VB자격증 070-506-VB
NO.6 You are developing a Silverlight 4 application.
You define the visual behavior of a custom control in the ControlTemplate by defining a VisualState object
named Selected.
You need to change the visual state of the custom control to the Selected state.
Which code segment or XAML fragment should you use?
A. VisualStateManager.GoToState(Me, "Selected", True)
B. <VisualTransition To="Selected">
<Storyboard>
...
</Storyboard>
</VisualTransition>
C. <VisualTransition From="Selected">
<Storyboard>
...
</Storyboard>
</VisualTransition>
D. Public Shared ReadOnly SelectedProperty As DependencyProperty =
DependencyProperty.Register("Selected", GetType(VisualState), GetType(MyControl), Nothing)
Public Property Selected As VisualState
Get
Return GetValue(SelectedProperty)
End Get
Set(ByVal value As VisualState)
SetValue(SelectedProperty, value)
End Set
End Property
Answer: A
Microsoft 070-506-VB 070-506-VB 070-506-VB인증
NO.7 You are developing an application by using Silverlight 4 and Microsoft .NET Framework 4. The
application has a TextBox control named txtName.
You need to handle the event when txtName has the focus and the user presses the F2 key.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose
two.)
A. AddHandler txtName.KeyDown, New KeyEventHandler ( AddressOf txtName_KeyDown)
B. AddHandler txtName.LostFocus, New RoutedEventHandler(AddressOf txtName_LostFocus)
C. AddHandler txtName.TextChanged, New TextChangedEventHandler(AddressOf
txtName_TextChanged)
D. Private Sub txtName_TextChanged(sender As Object, e As TextChangedEventArgs)
'Custom logic
If DirectCast(e.OriginalSource, Key) = Key.F2 Then
End If
End Sub
E. Private Sub txtName_KeyDown(sender As Object, e As KeyEventArgs)
'Custom logic
If e.Key = Key.F2 Then
End If
End Sub
F. Private Sub txtName_LostFocus(sender As Object, e As RoutedEventArgs)
'Custom logic
If DirectCast(e.OriginalSource, Key) = Key.F2 Then
End If
End Sub
Answer: AE
Microsoft dump 070-506-VB 070-506-VB 070-506-VB
NO.8 You are developing an application by using Silverlight 4 and Microsoft .NET Framework 4.
You create a Windows Communication Foundation (WCF) Data Service. You add a service reference to
the WCF Data Service named NorthwindEntities in the Silverlight application. You also add a
CollectionViewSource object named ordersViewSource in the Silverlight application.
You add the following code segment. (Line numbers are included for reference only.)
01 Sub getOrders_Click(ByVal sender As Object, ByVal e As RoutedEventArgs)
02 Dim context As New NorthwindEntities()
03
04 Dim query = From order In context.Orders Select order
05
06 End Sub
You need to retrieve the Orders data from the WCF Data Service and bind the data to the
ordersViewSource object.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose
two.)
A. Add the following code segment at line 03.
Dim obsCollection = New ObservableCollection(Of Order)
B. Add the following code segment at line 03.
Dim dsOrders As New DataServiceCollection(Of Order)
AddHandler dsOrders.LoadCompleted, New EventHandler(Of LoadCompletedEventArgs)(Sub(dsc, args)
ordersViewSource.Source = dsOrders
End Sub)
C. Add the following code segment at line 05.
dsOrders.LoadAsync(query)
D. Add the following code segment at line 05.
dsOrders.Load(query)
E. Add the following code segment at line 05.
query.ToList().ForEach(Sub(o) obsCollection.Add(o))
ordersViewSource.Source = obsCollection
Answer: BC
Microsoft 070-506-VB 070-506-VB 070-506-VB
NO.9 You are developing an application by using Silverlight 4 and Microsoft .NET Framework 4.
You add a BackgroundWorker object named worker to the application.
You add the following code segment. (Line numbers are included for reference only.)
01 Public Sub New()
02 InitializeComponent()
03 worker.WorkerSupportsCancellation = True
04 AddHandler worker.DoWork, New DoWorkEventHandler(AddressOf worker_DoWork)
05 AddHandler worker.RunWorkerCompleted, New RunWorkerCompletedEventHandler(AddressOf
worker_Completed)
06 End Sub
07 Private Sub worker_DoWork(sender As Object, e As DoWorkEventArgs)
08 For i As Integer = 0 To 99
09 InvokeLongRunningProcessStep()
10 Next
11 End Sub
You need to ensure that worker can be properly canceled.
Which code segment should you use to replace line 09?
A. Dim cancel = TryCast(sender, BackgroundWorker).CancellationPending
If cancel Then
TryCast(sender, BackgroundWorker).CancelAsync()
Else
InvokeLongRunningProcessStep()
End If
B. Dim cancel = TryCast(sender, BackgroundWorker).CancellationPending
If cancel Then
e.Cancel = True
Else
InvokeLongRunningProcessStep()
End If
C. Dim cancel = e.Cancel
If cancel Then
TryCast(sender, BackgroundWorker).CancelAsync()
Else
InvokeLongRunningProcessStep()
End If
D. Dim cancel = e.Cancel
If cancel Then
e.Cancel = True
Else
InvokeLongRunningProcessStep()
End If
Answer: B
Microsoft최신덤프 070-506-VB 070-506-VB자격증 070-506-VB dump
NO.10 You are developing a Silverlight 4 application.
You define an Invoice object according to the following code segment.
Public Class Invoice
Public Property InvoiceId() As Integer
Public Property Amount() As Double
Public Property Supplier() As Supplier
Public Property InvoiceDate() As DateTime
Public Property PayDate() As DateTime
Public Property InvoiceDescription() As String
End Class
You need to display a list of invoices that have the following properties displayed on each line: InvoiceId,
Amount, and InvoiceDate.
Which XAML fragment should you use?
A. <ListBox x:Name="InvoiceListBox">
<StackPanel Orientation="Horizontal">
<TextBlock Text="{Binding Path=InvoiceId}" />
<TextBlock Text="{Binding Path=Amount}" />
<TextBlock Text="{Binding Path=InvoiceDate}" />
</StackPanel>
</ListBox>
B. <ListBox x:Name="InvoiceListBox">
<StackPanel Orientation="Horizontal">
<ListBoxItem>
<TextBlock Text="{Binding Path=InvoiceId}" />
</ListBoxItem>
<ListBoxItem>
<TextBlock Text="{Binding Path=Amount}" />
</ListBoxItem>
<ListBoxItem>
<TextBlock Text="{Binding Path=InvoiceDate}" />
</ListBoxItem>
</StackPanel>
</ListBox>
C. <ListBox x:Name="InvoiceListBox">
<ListBox.Items>
<ItemsPanelTemplate>
<StackPanel Orientation="Horizontal">
<TextBlock Text="{Binding Path=InvoiceId}" />
<TextBlock Text="{Binding Path=Amount}" />
<TextBlock Text="{Binding Path=InvoiceDate}" />
</StackPanel>
</ItemsPanelTemplate>
</ListBox.Items>
</ListBox>
D. <ListBox x:Name="InvoiceListBox">
<ListBox.ItemTemplate>
<DataTemplate>
<StackPanel Orientation="Horizontal">
<TextBlock Text="{Binding Path=InvoiceId}" />
<TextBlock Text="{Binding Path=Amount}" />
<TextBlock Text="{Binding Path=InvoiceDate}" />
</StackPanel>
</DataTemplate>
</ListBox.ItemTemplate>
</ListBox>
Answer: D
Microsoft dumps 070-506-VB 070-506-VB
NO.11 You are developing an application by using Silverlight 4 and Microsoft .NET Framework 4.
You create a new user control in the application. You add the following XAML fragment to the control.
<StackPanel KeyDown="App_KeyDown" Orientation="Vertical">
<TextBox x:Name="firstName" />
<TextBox x:Name="lastName" />
<TextBox x:Name="address" />
</StackPanel>
You add the following code segment in the code-behind file of the control. (Line numbers are included for
reference only.)
01 Private Sub App_KeyDown(ByVal sender As Object, ByVal e As KeyEventArgs)
02
03 End Sub
04
05 Private Sub FirstAndLastNameKeyDown()
06 '...
07 End Sub
You need to ensure that the FirstAndLastNameKeyDown method is invoked when a key is pressed while
the focus is on the firstName or lastName TextBox controls. You also need to ensure that the default
behavior of the controls remains unchanged.
Which code segment should you add at line 02?
A. If ((CType(sender,FrameworkElement).Name = "firstName") _
OrElse (CType(sender,FrameworkElement).Name = "lastName")) Then
FirstAndLastNameKeyDown
End If
e.Handled = false
B. If ((CType(sender,FrameworkElement).Name = "firstName") _
OrElse (CType(sender,FrameworkElement).Name = "lastName")) Then
FirstAndLastNameKeyDown
End If
e.Handled = true
C. If ((CType(e.OriginalSource,FrameworkElement).Name = "firstName") _
OrElse (CType(e.OriginalSource,FrameworkElement).Name = "lastName")) Then
FirstAndLastNameKeyDown
End If
e.Handled = false
D. If ((CType(e.OriginalSource,FrameworkElement).Name = "firstName") _
OrElse (CType(e.OriginalSource,FrameworkElement).Name = "lastName")) Then
FirstAndLastNameKeyDown
End If
e.Handled = true
Answer: C
Microsoft덤프 070-506-VB최신덤프 070-506-VB최신덤프
NO.12 End Sub
You attempt to run the application. You receive the following error message:
"Invalid cross-thread access."
You need to ensure that worker executes successfully.
What should you do?
A. Replace line 09 with the following code segment.
Dim b = CType(checkBox.GetValue(CheckBox.IsCheckedProperty), System.Nullable(Of Boolean))
Dim isChecked As Boolean = b.HasValue AndAlso b.Value
B. Replace line 09 with the following code segment.
Dim isChecked As Boolean = False
Dispatcher.BeginInvoke(Function()
isChecked = checkBox.IsChecked.HasValue AndAlso checkBox.IsChecked.Value
End Function)
C. Replace line 15 with the following code segment.
statusTextBlock.SetValue(TextBlock.TextProperty, (e.ProgressPercentage + "%"))
D. Replace line 15 with the following code segment.
Dispatcher.BeginInvoke(Function()
statusTextBlock.Text = e.ProgressPercentage + "%"
End Function)
Answer: B
Microsoft dump 070-506-VB 070-506-VB
13. You are developing an application by using Silverlight 4 and Microsoft .NET Framework 4.
You add the following code segment. (Line numbers are included for reference only.)
01 Public Class MyControl Inherits Control
02
03 Public Property Title() As String
04 Get
05 Return DirectCast(GetValue(TitleProperty), String)
06 End Get
07 Set
08 SetValue(TitleProperty, value)
09 End Set
10 End Property
11 End Class
You need to create a dependency property named TitleProperty that allows developers to set the Title.
You also need to ensure that the default value of the TitleProperty dependency property is set to Untitled.
Which code segment you add at line 02?
A. Public Shared ReadOnly TitleProperty As DependencyProperty =
DependencyProperty.Register("Untitled", GetType(System.String),
GetType(MyControl), Nothing)
B. Public Shared ReadOnly TitleProperty As DependencyProperty =
DependencyProperty.Register("Untitled", GetType(System.String),
GetType(MyControl), New PropertyMetadata("Title"))
C. Public Shared ReadOnly TitleProperty As DependencyProperty =
DependencyProperty.Register("Title", GetType(System.String),
GetType(MyControl), New PropertyMetadata("Untitled"))
D. Public Shared ReadOnly TitleProperty As DependencyProperty =
DependencyProperty.Register("Title", GetType(String),
GetType(MyControl), New PropertyMetadata(New PropertyChangedCallback(Sub(depObj, args)
depObj.SetValue(MyControl.TitleProperty, "Untitled")
End Sub)))
Answer: C
Microsoft 070-506-VB시험문제 070-506-VB dump
14. You are developing an application by using Silverlight 4 and Microsoft .NET Framework 4.
You create a control named MyControl in the application. Each instance of the control contains a list of
FrameworkElement objects.
You add the following code segment. (Line numbers are included for reference only.)
01 Public Class MyControl
02 Inherits Control
03
04 Public ReadOnly Property ChildElements As List(Of FrameworkElement)
05 Get
06 Return DirectCast(GetValue(MyControl.ChildElementsProperty), List(Of FrameworkElement))
07 End Get
08 End Property
09 Public Sub New()
10
11 End Sub
12
13 Shared Sub New()
14
15 End Sub
16 End Class
You need to create the ChildElementsProperty dependency property. You also need to initialize the
property by using an empty list of FrameworkElement objects.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose
two.)
A. Add the following code segment at line 03.
Public Shared ReadOnly ChildElementsProperty As DependencyProperty =
DependencyProperty.Register("ChildElements", GetType(List(Of
FrameworkElement)), GetType(MyControl), New PropertyMetadata(New
List(Of FrameworkElement)()))
B. Add the following code segment at line 03.
Public Shared ReadOnly ChildElementsProperty As DependencyProperty =
DependencyProperty.Register("ChildElements", GetType(List(Of
FrameworkElement)), GetType(MyControl), New
PropertyMetadata(Nothing))
C. Add the following code segment at line 10.
SetValue(MyControl.ChildElementsProperty, New List(Of
FrameworkElement)())
D. Add the following code segment at line 14.
ChildElementsProperty = DependencyProperty.Register("ChildElements",
GetType(List(Of FrameworkElement)), GetType(MyControl), New
PropertyMetadata(New List(Of FrameworkElement)()))
Answer: BC
Microsoft인증 070-506-VB자격증 070-506-VB자격증 070-506-VB시험문제
15. You are developing an application by using Silverlight 4 and Microsoft .NET Framework 4.
You add the following code segment. (Line numbers are included for reference only.)
01 Dim outerCanvas = New Canvas()
02 Dim innerCanvas = New Canvas()
03 innerCanvas.Width = 200
04 innerCanvas.Height = 200
05 outerCanvas.Children.Add(innerCanvas)
06
You need to set the distance between the left of the innerCanvas element and the left of the outerCanvas
element to 150 pixels.
Which code segment should you add at line 06?
A. outerCanvas.Margin = New Thickness(0.0, 150.0, 0.0, 0.0)
B. innerCanvas.Margin = new Thickness(0.0, 150.0, 0.0, 0.0)
C. outerCanvas.SetValue(Canvas.LeftProperty, 150.0)
D. innerCanvas.SetValue(Canvas.LeftProperty, 150.0)
Answer: D
Microsoft덤프 070-506-VB 070-506-VB자료
NO.13 End Sub
NO.14 You are developing an application by using Silverlight 4 and Microsoft .NET Framework 4.
You add a BackgroundWorker object named worker to the application. You also add a CheckBox control
named checkBox and a TextBlock control named statusTextBlock.
You add the following code segment. (Line numbers are included for reference only.)
01 Public Sub New()
02 InitializeComponent()
03 worker.WorkerReportsProgress = True
04 AddHandler worker.DoWork, New DoWorkEventHandler(AddressOf worker_DoWork)
05 AddHandler worker.ProgressChanged, New ProgressChangedEventHandler(AddressOf
worker_ProgressChanged)
06 End Sub
07 Private Sub worker_DoWork(sender As Object, e As DoWorkEventArgs)
08 For i As Integer = 0 To 99
09 Dim isChecked As Boolean = checkBox.IsChecked.HasValue AndAlso
checkBox.IsChecked.Value
10 ExecuteLongRunningProcessStep(isChecked)
11 worker.ReportProgress(i)
12 Next
NO.15 You are developing a Silverlight 4 application.
The application defines the following three event handlers. (Line numbers are included for reference only.)
01 Private Sub HandleCheck(sender As Object, e As RoutedEventArgs)
02 MessageBox.Show("Checked")
03 End Sub
04
05 Private Sub HandleUnchecked(sender As Object, e As RoutedEventArgs)
06 MessageBox.Show("Unchecked")
07 End Sub
08
09 Private Sub HandleThirdState(sender As Object, e As RoutedEventArgs)
10 MessageBox.Show("Indeterminate")
11 End Sub
You need to allow a check box that can be selected, cleared, or set to Indeterminate. You also need to
ensure that the event handlers are invoked when the user changes the state of the control.
Which XAML fragment should you use?
A. <CheckBox x:Name="cb2" Content="Three State CheckBox"
IsChecked="True" Checked="HandleCheck"
Indeterminate="HandleUnchecked" Unchecked="HandleUnchecked" />
B. <CheckBox x:Name="cb2" Content="Three State CheckBox"
IsThreeState="True" Checked="HandleCheck"
Indeterminate="HandleThirdState" Unchecked="HandleUnchecked" />
C. <CheckBox x:Name="cb2" Content="Three State CheckBox"
IsHitTestVisible="True" Checked="HandleCheck"
Indeterminate="HandleThirdState" Unchecked="HandleUnchecked" />
D. <CheckBox x:Name="cb2" Content="Three State CheckBox"
IsEnabled="True" Checked="HandleCheck"
Indeterminate="HandleUnchecked" Unchecked="HandleUnchecked" />
Answer: B
Microsoft덤프 070-506-VB dump 070-506-VB 070-506-VB dumps 070-506-VB
NO.16 You are developing a Silverlight 4 application.
You have a collection named ColPeople of the List<Person> type.
You define the Person class according to the following code segment.
Public Class Person
Public Property Name() As String
Public Property Description() As String
Public Property Gender() As String
Public Property Age() As Integer
Public Property Weight() as Integer
End Class
You need to bind ColPeople to a ComboBox so that only the Name property is displayed.
Which XAML fragment should you use?
A. <ComboBox DataContext="{Binding ColPeople}" ItemsSource="{Binding ColPeople}"
DisplayMemberPath="Name" />
B. <ComboBox DataContext="{Binding Person}" ItemsSource="{Binding Person}"
DisplayMemberPath="ColPeople" />
C. <ComboBox DataContext="{Binding ColPeople}" DisplayMemberPath="Name" />
D. <ComboBox DataContext="{Binding Person}" />
Answer: A
Microsoft 070-506-VB인증 070-506-VB 070-506-VB 070-506-VB
ITexamdump의 642-996덤프의 VCE테스트프로그램과 NS0-156덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 000-225시험에 대비한 고품질 덤프와 400-051시험 최신버전덤프를 제공해드립니다. 최고품질 1Z0-060시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기