E20-335 덤프 EMC 자격증 덤프

ITExamDump이 바로 아주 좋은EMC E20-335인증시험덤프를 제공할 수 있는 사이트입니다. ITExamDump 의 덤프자료는 IT관련지식이 없는 혹은 적은 분들이 고난의도인EMC E20-335인증시험을 패스할 수 있습니다. 만약ITExamDump에서 제공하는EMC E20-335인증시험덤프를 장바구니에 넣는다면 여러분은 많은 시간과 정신력을 절약하실 수 있습니다. 우리ITExamDump 의EMC E20-335인증시험덤프는 ITExamDump전문적으로EMC E20-335인증시험대비로 만들어진 최고의 자료입니다.

IT업계에 종사하고 계시나요? 최근 유행하는EMC인증 E20-335 IT인증시험에 도전해볼 생각은 없으신지요? IT 인증자격증 취득 의향이 있으시면 저희. ITExamDump의 EMC인증 E20-335덤프로 시험을 준비하시면 100%시험통과 가능합니다. ITExamDump의 EMC인증 E20-335덤프는 착한 가격에 고품질을 지닌 최고,최신의 버전입니다. ITExamDump덤프로 가볼가요?

시험 번호/코드: E20-335
시험 이름: EMC (Symmetrix Solutions Specialist Exam for Implementation Engineers)

ITExamDump 의 EMC인증 E20-335덤프는EMC인증 E20-335시험에 도전장을 던진 분들이 신뢰할수 있는 든든한 길잡이 입니다. EMC인증 E20-335시험대비 덤프뿐만아니라 다른 IT인증시험에 대비한 덤프자료도 적중율이 끝내줍니다. EMC인증 E20-335시험이나 다른 IT인증자격증시험이나ITExamDump제품을 사용해보세요.투자한 덤프비용보다 훨씬 큰 이득을 보실수 있을것입니다.

EMC인증E20-335시험을 패스함으로 취업에는 많은 도움이 됩니다. ITExamDump는EMC인증E20-335시험패스로 꿈을 이루어주는 사이트입니다. 우리는EMC인증E20-335시험의 문제와 답은 아주 좋은 학습자료로도 충분한 문제집입니다. 여러분이 안전하게 간단하게EMC인증E20-335시험을 응시할 수 있는 자료입니다.

ITExamDump에서 EMC인증 E20-335덤프를 구입하시면 퍼펙트한 구매후 서비스를 제공해드립니다. EMC인증 E20-335덤프가 업데이트되면 업데이트된 최신버전을 무료로 서비스로 드립니다. 시험에서 불합격성적표를 받으시면 덤프구매시 지불한 덤프비용은 환불해드립니다.

EMC인증 E20-335시험을 통과하여 자격증을 취득하여 IT 업계에서의 자신의 자리를 지키려면 많은 노력이 필요합니다. 회사일도 바쁜데 시험공부까지 스트레스가 장난아니게 싸이고 몸도 많이 상하겠죠. ITExamDump는 여러분을 위해 최신EMC인증 E20-335시험에 대비한EMC인증 E20-335덤프를 발췌하였습니다. EMC인증 E20-335덤프는EMC인증 E20-335시험의 기출문제와 예상문제가 묶어져 있어 시험적중율이 굉장히 높습니다. 쉽게 시험을 통과하려면ITExamDump의 EMC인증 E20-335덤프를 추천합니다.

EMC인증 E20-335시험은 IT인증시험중 가장 인기있는 시험입니다. EMC인증 E20-335시험패스는 모든 IT인사들의 로망입니다. ITExamDump의 완벽한 EMC인증 E20-335덤프로 시험준비하여 고득점으로 자격증을 따보세요.

E20-335 덤프무료샘플다운로드하기: http://www.itexamdump.com/E20-335.html

NO.1 What is recommended before creating a TimeFinder/Mirror replica?
A. Ensure that the production application using the source devices is shut down
B. Ensure that all writes from the production application using the source devices are paused!
C. Ensure that the BCVs are not being actively accessed
D. Set the BCVs to a Not Ready state
Answer: Chttp://www.scribd.com/doc/37352326/Emc-Study-2

NO.2 Refer to the exhibit.
A database server has its logs stored on a volume on the log source Symmetrix V-Max array and its data
stored on a volume on the data source Symmetrix V-Max array. Both source Symmetrix V-Max array
frames replicate data to the target Symmetrix V-Max array at the Remote site. There are two device
groups that have been defined:
One group for the data volume on the Symmetrix containing the data LUNs
One group for the log volume on the Symmetrix containing the log LUNS
What happens if the SRDF inks between the Symmetrix contain the data LUNs and the target Symmetrix
were to fail?
A. The R2 data in the database remains consistent because Enginuity Consistency Assist (RDFECAJ
technology would ensure data consistency).
B. The data in the database becomes inconsistent at the Remote site.
C. An SRDF failover would be initiated on all volumes and processing will automatically be switched over
to the Remote site
D. The R2 volumes in the Symmetrix V-Max containing the log LUNs would become write-disabled to the
database server
Answer: C

EMC dumps   E20-335   E20-335자격증   E20-335

NO.3 Refer to the exhibit
What is the correct state for the Standard and Rl-BCV prior to issuing a symreplicate start command?
A. Synchronized
B. Suspended
C. Split
D. Write-Enable
Answer: C

EMC   E20-335   E20-335시험문제   E20-335   E20-335시험문제

NO.4 Which file contains the parameter that can change the default behavior of SYMCLI operations, and
there control actions?
A. SYMCLI options File
B. SYMAPI Options File
C. SYMCLI Command File
D. SYMAPI Command File
Answer: B

EMC   E20-335시험문제   E20-335

NO.5 One of the requirements, during an Open Replicator implementation is that production application
should not be implemented by open Replication session. An analysis of the control Symmetrix showed
that FA ports are currently 70% utilized. How should pace and ceiling be configured?
A. Pace should be set to 0 and Ceiling should be left at the default
B. Pace should be left at the default and Ceiling set to 30
C. Pace should be left at the default and Ceiling set to 100
D. Pace should be set to 9 and Ceiling should be set to 70
Answer: B

EMC dump   E20-335   E20-335 pdf   E20-335

NO.6 An SRDF failover has been executed during the testing phase of an implementation. What is the
expected status of the R1 and R2 devices after performing SRDF failover operation?
A. R1 and R2 Not Ready
B. R1 Wnte Disabled; R2 Read/Wnte
C. R1 Read/Wnte, R2 Read/Wnte
D. R1 Read/Wnte. R2 Wnte Disabled
Answer: Bhttp://www.scribd.com/doc/29541661/Srdf-Operations-white-Paper

NO.7 You have been asked to create a configuration for a single engine Symmetric V-Max array with 8 DAEs
and 64 drivers. They would like to have the data devices with RAID 5(7+1) protection.
What would be the largest number of members you would recommend for a stripped metavolume.?
A. 4
B. 16
C. 8
D. 32
Answer: B

EMC시험문제   E20-335   E20-335   E20-335인증   E20-335

NO.8 How does Delta Set Extension help in an SRDF/A deployment?
A. Reduces RPO
B. Reduces the amount of required cache
C. Improves response time
D. Absorbs bursts of host writes
Answer: D

EMC시험문제   E20-335   E20-335시험문제   E20-335   E20-335 dump

NO.9 On the Symmetrix platform, which type of RAID protection ensures the best random write performance?
A. RAID 1
B. RAID S
C. RAID 6
D. RAID 5
Answer: A

EMC pdf   E20-335   E20-335   E20-335인증

NO.10 In symmetric V-max series array running Enginuity 5874, which device is used as a pass-through
device for Auto provisioning?
A. VDEV
B. VCM
C. ACLX
D. SFS
Answer: C

EMC   E20-335자격증   E20-335

NO.11 Diagnostic messaging for the GNS daemon is written to which file?
A. /7SYMAPI/emc/storgnsd .log0
B. /SYMAPI/log/storgnsd.log0
C. /SYMAPl/usr/storgnsd log0
D. /SYMAPl/bin/storgnsd log0
Answer: B

EMC기출문제   E20-335   E20-335기출문제   E20-335   E20-335

NO.12 What is required to ensure the integrity of data on the R2 volume during a SRDF fallback operation?
A. Remove entries from the file system table
B. Stop any applications that are accessing the R2 volume
C. Disable journaling on the file system
D. Suspend the RDF link
Answer: B

EMC   E20-335 dumps   E20-335

NO.13 Open Replicator pull will be used to move data between a third party array and a Symmetrix V-Max
array.
What is recommended before starting the Open Replicator session?
A. Ensure that the remote devices are Host read/write enabled
B. Ensure that the control devices are Not Ready
C. Ensure that the remote devices are Host inaccessible
D. Ensure that the control devices are Write Disabled
Answer: C

EMC dumps   E20-335시험문제   E20-335

NO.14 Which command is used to set or reset HBA port flags on Symmetric arrays running Enable 7.0
Enginuity 5874?
A. symcfg
B. symmask
C. symconfigure
D. symaccess
Answer: D

EMC시험문제   E20-335   E20-335시험문제   E20-335 pdf   E20-335 pdf

NO.15 Where is the volume Logix Database maintained starting with DMX-3?
A. VCM gatekeeper
B. Symmetrix logical Volume
C. Symmetrix File System
D. VCM database.
Answer: C

EMC dumps   E20-335   E20-335   E20-335

ITExamDump에서 최고최신버전의EMC인증E20-335시험덤프 즉 문제와 답을 받으실 수 있습니다. 빨리 소지한다면 좋겠죠. 그래야 여러분은 빨리 한번에EMC인증E20-335시험을 패스하실 수 있습니다.EMC인증E20-335관련 최고의 자료는 현재까지는ITExamDump덤프가 최고라고 자신 있습니다.