Oracle 1Z0-146 최신덤프

ITExamDump는 저희 제품을 구매한 분들이 100%통과율을 보장해드리도록 최선을 다하고 있습니다. ITExamDump를 선택한것은 시험패스와 자격증취득을 예약한것과 같습니다. ITExamDump의 믿음직한 Oracle인증 1Z0-146덤프를 공부해보세요.

우리ITExamDump에는 아주 엘리트한 전문가들로 구성된 팀입니다. 우리는 아주 정확하게 또한 아주 신속히Oracle 1Z0-146관한 자료를 제공하며, 업데이트될경우 또한 아주 빠르게 뉴버전을 여러분한테 보내드립니다. ITExamDump는 관련업계에서도 우리만의 브랜드이미지를 지니고 있으며 많은 고객들의 찬사를 받았습니다. 현재Oracle 1Z0-146인증시험패스는 아주 어렵습니다, 하지만 ITExamDump의 자료로 충분히 시험 패스할 수 있습니다.

우리ITExamDump에는 아주 엘리트 한 전문가들로 구성된 팀입니다 그들은 끈임 없는 연구와 자기자신만의 지식으로 많은 IT관연 덤프자료를 만들어 냄으로 여러분의 꿈을 이루어드립니다, 기존의 시험문제와 답과 시험문제분석 등입니다. ITExamDump에서 제공하는Oracle 1Z0-146시험자료의 문제와 답은 실제시험의 문제와 답과 아주 비슷합니다. ITExamDump덤프들은 모두 보장하는 덤프들이며 여러분은 과감히 ITExamDump의 덤프를 장바구니에 넣으세요. ITExamDump에서 여러분의 꿈을 이루어 드립니다.

ITExamDump의 Oracle인증 1Z0-146덤프는 거의 모든 실제시험문제 범위를 커버하고 있습니다.Oracle인증 1Z0-146시험덤프를 구매하여 덤프문제로 시험에서 불합격성적표를 받을시ITExamDump에서는 덤프비용 전액 환불을 약속드립니다.

Oracle인증 1Z0-146 시험은 최근 제일 인기있는 인증시험입니다. IT업계에 종사하시는 분들은 자격증취득으로 자신의 가치를 업그레이드할수 있습니다. Oracle인증 1Z0-146 시험은 유용한 IT자격증을 취득할수 있는 시험중의 한과목입니다. ITExamDump에서 제공해드리는Oracle인증 1Z0-146 덤프는 여러분들이 한방에 시험에서 통과하도록 도와드립니다. 덤프를 공부하는 과정은 IT지식을 더 많이 배워가는 과정입니다. 시험대비뿐만아니라 많은 지식을 배워드릴수 있는 덤프를ITExamDump에서 제공해드립니다. ITExamDump덤프는 선택하시면 성공을 선택한것입니다.

시험 번호/코드: 1Z0-146

시험 이름: Oracle (Oracle database 11g:advanced pl/sql)

1Z0-146 덤프무료샘플다운로드하기: http://www.itexamdump.com/1Z0-146.html

NO.1 Examine the code in the following PL/SQL block:
DECLARE
TYPE NumList IS TABLE OF INTEGER;
List1 NumList := NumList(11,22,33,44);
BEGIN
List1.DELETE(2);
DBMS_OUTPUT.PUT_LINE
( 'The last element# in List1 is ' || List1.LAST ||
' and total of elements is '||List1.COUNT);
List1.EXTEND(4,3);
END;
/
Which two statements are true about the above code? (Choose two.)
A. LAST and COUNT give different values.
B. LAST and COUNT give the same values.
C. The four new elements that are added contain the value 33.
D. The four new elements that are added contain the value 44.
Answer: AC

Oracle인증   1Z0-146시험문제   1Z0-146인증   1Z0-146 dumps

NO.2 View the Exhibit and examine the procedure to create a trigger name based on the table name supplied
to the procedure.
Which three statements are appropriate for protecting the code in the procedure from SQL injection?
(Choose three.)
A. Explicitly validate the identifier length limit.
B. Add AUTHID DEFINER to the definition of the procedure.
C. Use PRAGMA RESTRICT_REFERENCES in the procedure.
D. Filter out control characters in user-supplied identifier names.
E. Use the object ID of the table from the data dictionary to build the trigger name.
Answer: ADE

Oracle   1Z0-146   1Z0-146최신덤프   1Z0-146   1Z0-146

NO.3 Which two types of metadata can be retrieved by using the various procedures in the
DBMS_METADATA PL/SQL package.? (Choose two.)
A. report of invalidated objects in a schema
B. report of statistics of an object in the database
C. DDL for all object grants on a table in the database
D. data definition language (DDL) for all objects in a schema
Answer: CD

Oracle자료   1Z0-146   1Z0-146자격증

NO.4 Which two statements are true about associative arrays and varrays? (Choose two.)
A. Only varrays must start with the subscript 1.
B. Only varrays can be used as column types in database tables.
C. Both associative arrays and varrays must start with the subscript 1.
D. Both associative arrays and varrays can be used as column types in database tables.
Answer: AB

Oracle   1Z0-146자료   1Z0-146   1Z0-146

NO.5 DATA_FILES is a directory object that contains the DETAILS.TXT text file.
You have the required permissions to access the directory object.
You create a table using the following command:
CREATE TABLE clob_tab(col2 CLOB);
View the Exhibit and examine the PL/SQL block that you execute for loading the external text file into the
table that currently has no rows. The PL/SQL block results in an error.
What correction must be done to ensure the PL/SQL block executes successfully?
A. The L_OUT variable must be initialized to an empty locator.
B. The L_OUT variable has to be declared as a temporary LOB.
C. The A_CLOB variable has to be declared as a temporary LOB.
D. The clause RETURNING col2 INTO a_clob should be added to the INSERT statement to correctly
initialize the locator.
Answer: D

Oracle인증   1Z0-146   1Z0-146   1Z0-146 dump   1Z0-146

NO.6 Which two statements are true about SecureFile LOB options? (Choose two.)
A. The COMPRESSION HIGH option can be enabled only for CLOBs.
B. The COMPRESSION HIGH option can be enabled for all internal LOBs.
C. The DECRYPT option can be used to remove encryption only if the LOB column is empty.
D. The DECRYPT option can be used to remove encryption from LOB columns that are empty or contain
data.
Answer: BD

Oracle   1Z0-146최신덤프   1Z0-146   1Z0-146기출문제

NO.7 Examine the commands:
CREATE TYPE typ_course_tab IS VARRAY(5) OF VARCHAR2(20)
/
CREATE TYPE typ_course_nst
AS TABLE OF typ_course_tab
/
CREATE TABLE faculty
( faculty_id NUMBER(5),
faculty_name VARCHAR2(30),
courses typ_course_nst)
NESTED TABLE courses STORE AS course_stor_tab
/
INSERT INTO faculty
VALUES (101, 'Jones', NULL);
UPDATE (SELECT courses FROM faculty WHERE faculty_id=101) SET courses =
typ_course_nst(11,'Oracle');
Which statement is true about the execution of these commands?
A. All the commands execute successfully.
B. Only the first two commands execute successfully.
C. Only the first four commands execute successfully.
D. Only the first three commands execute successfully.
Answer: C

Oracle dumps   1Z0-146   1Z0-146시험문제

NO.8 Which statement describes the purpose of the plshprof command?
A. It produces HTML output from raw profiler output.
B. It produces HTML output from profiler tables in the database.
C. It populates profiler tables in the database from raw profiler output.
D. It populates profiler tables in the database from raw profiler output.
Answer: A

Oracle시험문제   1Z0-146   1Z0-146기출문제   1Z0-146자격증   1Z0-146

NO.9 The database instance was recently started up. Examine the following parameter settings for the
database instance:
NAME TYPE VALUE
------------------------------------ ----------- ----------------------------
result_cache_max_result integer 5
result_cache_max_size big integer 0
result_cache_mode string MANUAL
result_cache_remote_expiration integer 0
.........
You reset the value for the result_cache_max_size parameter by issuing the following command:
SQL> ALTER SYSTEM SET result_cache_max_size = 1056k SCOPE = BOTH;
System altered.
Which statement is true in this scenario?
A. 1056 KB is allocated for the result cache and the result cache is enabled.
B. 1056 KB is allocated for the result cache, but the result cache is disabled.
C. The results for only the queries that have the RESULT_CACHE hint are cached.
D. The results for all the queries except those having the NO_RESULT_CACHE hint are cached.
Answer: B

Oracle dumps   1Z0-146   1Z0-146

NO.10 View the Exhibit and examine the structure of the EMPLOYEES table.
Examine the following PL/SQL block:
DECLARE
TYPE EmpList
IS VARRAY(2) OF employees.employee_id%TYPE NOT NULL;
v_employees EmpList := EmpList();
BEGIN
DBMS_OUTPUT.PUT_LINE(v_employees.COUNT);
v_employees.EXTEND;
v_employees(1) := 30;
END;
/
Which statement is true about the outcome on executing the above PL/SQL block?
A. It executes successfully and displays the value 2.
B. It executes successfully and displays the value 0.
C. It generates an error because EXTEND cannot be used for varrays.
D. It generates an error because the declaration of the varray is not valid.
Answer: B

Oracle자료   1Z0-146   1Z0-146

NO.11 Examine the structure of the DEPARTMENTS table.
Name Null? Type
----------------------------- ------------ ----------
DEPARTMENT_ID NOT NULL NUMBER(4)
DEPARTMENT_NAME NOT NULL VARCHAR2(30)
LOCATION_ID NUMBER(4)
View the Exhibit and examine the code that you plan to use for creating a package to obtain the
details of an employee using a host variable on the client side.
In SQL*Plus, you plan to use the following commands:
SQL> VARIABLE x REFCURSOR
SQL> EXECUTE emp_data.get_emp(195,:x)
SQL> PRINT x
Which statement is true about the above scenario?
A. The package executes successfully and passes the required data to the host variable.
B. The package specification gives an error on compilation because cursor variable types cannot be
defined in the specification.
C. The package specification gives an error on compilation because the cursor variable parameter was
specified before you defined it.
D. The package executes successfully, but does not pass the required data to the host variable because
the cursor is closed before the PRINT statement runs.
Answer: D

Oracle   1Z0-146   1Z0-146

NO.12 Examine the structure of the EMPLOYEES table in the SCOTT schema.
Name Null? Type
----------------------- --------------- ---------------
EMPLOYEE_ID NOT NULL NUMBER(6)
FIRST_NAME VARCHAR2(20)
LAST_NAME NOT NULL VARCHAR2(25)
SALARY NOT NULL NUMBER(8,2)
COMMISSION_PCT NUMBER(2,2)
DEPARTMENT_ID NUMBER(4)
View the Exhibit and examine the code for the EMP_TOTSAL procedure created by user SCOTT.
Which statement is true regarding the EMP_TOTSAL procedure?
A. It is created successfully, but displays the correct output message only for existent employee IDs.
B. It is created successfully and displays the correct output message for both existent and nonexistent
employee IDs.
C. It generates an error because the %NOTFOUND attribute cannot be used in
combination with a SELECT INTO statement
D. It generates an error because a user-defined exception has to be included whenever
the %NOTFOUND attribute is used in combination with a SELECT INTO statement.
Answer: A

Oracle   1Z0-146   1Z0-146

NO.13 View the Exhibit to examine the PL/SQL code for the GET_METADATA function. Which statement is
true about the metadata gathered by the function?
A. The end result is the creation of DDL for the TIMECARDS table with all instances of the HR schema
changed to SCOTT.
B. The end result is the creation of an XML document for all tables with all physical, storage, logging, and
other segment attributes.
C. The end result is the creation of DDL for all tables with all instances of the HR schema changed to
SCOTT along with all physical, storage, logging, and other segment attributes.
D. The end result is the creation of DDL for all tables and associated indexes with all instances of the HR
schema changed to SCOTT along with all physical, storage, logging, and other segment attributes.
Answer: A

Oracle   1Z0-146   1Z0-146인증   1Z0-146   1Z0-146인증   1Z0-146

NO.14 In a user session, tracing is enabled as follows:
SQL> EXECUTE
DBMS_TRACE.SET_PLSQL_TRACE(DBMS_TRACE.TRACE_ENABLED_LINES);
PL/SQL procedure successfully completed.
You executed the procedure as follows:
SQL> EXECUTE PROC10
PL/SQL procedure successfully completed.
When you examine the PLSQL_TRACE_EVENTS table, you find that no trace information was
written into it.
View the Exhibit.
What is the reason for this?
A. The PROC10 procedure is created with the invoker's right.
B. The PROC10 procedure is not compiled with the DEBUG option.
C. Tracing is not enabled with the TRACE_ENABLED_CALLS option.
D. The TRACE_ENABLED parameter is set to FALSE for the session.
Answer: B

Oracle최신덤프   1Z0-146   1Z0-146   1Z0-146 dump

NO.15 Which two statements correctly describe the features of SecureFiles? (Choose two.)
A. Compression does not entail table or index compression and vice-versa.
B. Encryption stores the encryption keys for the LOB columns inside the database.
C. Encryption stores the encryption keys for the LOB columns outside the database.
D. Compression stores identical data occurring two or more times in the same LOB column as a single
copy for the table.
Answer: AC

Oracle pdf   1Z0-146 dumps   1Z0-146 pdf   1Z0-146   1Z0-146기출문제

Oracle인증1Z0-146시험준비를 하고 계시다면ITExamDump에서 출시한Oracle인증1Z0-146덤프를 제일 먼저 추천해드리고 싶습니다. ITExamDump제품은 여러분들이 제일 간편한 방법으로 시험에서 고득점을 받을수 있도록 도와드리는 시험동반자입니다. Oracle인증1Z0-146시험패는ITExamDump제품으로 고고고!